1-5TPH small Stainless cheap palm oil equipment

1. Description of Full Continuous Refining Line:
1-5TPH small Stainless cheap palm oil equipment is based on the difference of oil and the impurities in the physical and chemical properties, separate the grease and impurity by some technical ways ,in order to improve the oil edible,storage stability and safety process.1-5TPH small Stainless cheap palm oil equipment is divided into chemical refining and physical refining.The mini crude oil refinery we adopt suits different kinds of vegetable oil process.According to the raw materials and capacity , we can use batch, continuous, physical and chemical refining design. The product mini crude oil refinery of edible oil equipment can reach first to fourth grade. Guarantee the highest quality in lowest cost.
Capacity of 1-5TPH small Stainless cheap palm oil equipment:5TPD-1000TPD

2.Full Continuous Refining Line process:
Main process of 1-5TPH small Stainless cheap palm oil equipment:
**Hydration Deguming & Alkali Refining Deacidification Process
**Continuous Refining Decoloring Process
**Continuous Refining Deodorizing Process
**Automatic Control System of refined canola oil price equipment and so on

3.Advantages of Full Continuous Refining Line:
**The oil fully contacting with the decolorant can improve the decolorization efficiency and reduce the usage of decolorant.
**The continuous and uniform material flows of crude oil refinery will balance the decoloring time and avoid the recovery of grease oxidation and acid value.
**The special mixing structure of decoloring tower won't cause the material dead area, which can avoid the adsorbent sedimentation and pipe blockage.
**The continuous airtight efficient filtration equipment of crude oil refinery has realized the automation of cake discharge and reduced the labor intensity.
**The advanced drying technology of crude oil refinery can reduce the oil content in filter cake.

1-5TPH small Stainless cheap palm oil equipment

10-100t/h automatic palm oil press

How to get crude palm oil?

Palm oil process line includes sterilizing, threshing, digesting, pressing, clarification, purification

and drying. Then you can get crude palm oil.

Sterilization: Boiling and sterilizing bunches with high temperature( more than 145 C).

Palm fruit bunch are airtight sterilized in sterilizer. The purpose is to prevent enzymes

broken down, avoiding FFA content in oil further increase; easy threshing machinery;

pretreatment peel, prepared for the follow-up processing; pre-conditioning stone, reducing

the damage kernel.

Threshing:Separating fruits from bunches by strong vibration. The purpose of threshing is

to separate oil palm fruit from the fruit bunch through strong vibration, Threshing equipment

is revolving drum thresher. The separated oil palm fruit is ejected then into the pressing section.

Empty fruit bunch be ejected to the yard from the other side of the revolving drum, or shipped out

from the plant as palm orchards slipcover to recycling use, or burning in the locale as fertilizer

for agricultural land.

Digesting:Stiring fruits. Before pressed, oil palm fruit first be carried out cooking, sterilized fruit

must be re-heated to make the pulp soft and damage pulp cell structure.

Pressing: After pressing, oil palm fruit is divided into two parts: oil, water, solid impurities mixture

and the press cake (fiber and nut). Oil, water, solid impurities mixture inflow to oil purification section

by the crude oil gutter; pressed cake into the fiber- recovery section by breaking screw conveyor.

Clarification and purification: Removing oil and sludge (get 90% pure oil), the oil

contains 45%-55% moisture, sludge, and other wastes. Machine-pressed crude oil first diluted

with water washing, the fiber material removed from the oil through settlement and filtration,

and then carry out continuous settlement, the whole divided into two parts: oil

and sediment.

Drying: Through centrifugal separation and vacuum drying, oil is pumped into the storage tank

for storing; oil sediment by filtration and dirt oil separation, oil proceeds second settlement,

dirty oil mixture proceeds clarification separation, skim oil then be carried out a second settlement,

sewage pumps to sewage treatment pond for dealing.

Some datas

Crude palm oil standard:

Kernel standard:

Production quality index:

1,transparency : clear and transparent.

2,smell and taste: no strange smell;

3,color (lovibond colorimeter 133.4 slots) ≤ R1Y10;

4,moisture and volatile matter: ≤ 0.10%;

5,impurities content : ≤ 0.10%;

6,acid value (mgKOH/g) : ≤ 0.12;

7,peroxide value (mmol/kg): ≤ 3.

How to get crude palm kernel oil?

Crude palm kernel oil process line includes polishing, crushing and pressing.

Polishing: Separating nuts and fiber by wind drying system. Pressed cake broken by breaking

screw conveyor and then transported into the fiber separation air net and fiber polishing roller

for fiber separating. The separated fiber material is sent to the boiler room as fuel; the separated

stone is transported to stone warehouse by pneumatic conveying system for temporary storage.

Crushing: Crushing nuts to get kernels and shells. The nut is divided into two or more petal

by corrugated crusher, kernel is released. The broken mixture enters into broken mixture

separation system; separation system adopts two stage separation and water separation.

After separation, shell is sent to the warehouse for temporary storage, as boiler room fuel

when necessary.

Pressing: Pressing kernels to get crude palm kernel oil with machine as below. For more information

of this machine, please check: Full automatic pumpkin seed oil press machine

How to get better oil

If you want to get better quality oil, you can refine and fractionate it.

It includes degumming, bleaching, deodorization, deacidification and fractionation.

For more information, please check: crude palm oil refining line

Company Information

Our Strength

1, Established in 1982, we have more than 30 years experience. Our goal is to be pioneer in global grain and oil

industry.

2, We have deep cooperation with Jinan Machine Design Research Institute and Jinan University of

Technology. Our professor often go abroad attending grain and oil conference and forum.

3, We have completed service line including technical department, engineering department, project department,

electronic commerce department, domestic trade department and foreign trade department. After signing

contract, we will set up special team including engineers, installation technicians, drawing designer,

business person, after-sales service person, and so on. We will provide one-to-one service.

Our Service

• Whole set of equipment for production line.

• Motor and power control system.

• Installation material.

• Installation and test-run.

• Drawing of process description, equipment layout, foundation and

  hole, construction.

• Drawing of power control.

• Isolation and painting for equipment.

• Water recycling and cooling system outside the plant (i.e. supplementary device).

• Staff training and long-term technical service.

Main Business Field

• 10-500T/H oil material primary cleaning,drying and storage section turn-key project.
• 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot dehulling, bean skin crushing, the soybean extrusion, high oil contained pre-pressed cake extrusion and high oil contained flakes puffed directly). Rice bran turn-key project.
• 100-3000 T/D leaching workshop turnkey project (towline extractor, rotocel extractor, loop type extractor,
• DTDC separated machine, the full negative pressure evaporation,
• Paraffin wax recovery, leaching workshop degumming, phospholipid concentration).
• 30-1000T/D continuous physical (chemical) refining line.
• 20-3000T/D sunflower oil, rice bran oil, corn germ oil dewaxing turnkey project.
• 10-200T/D fatty acid esterification edible oil production line.

Our Certificates

Shandong Leader Machinery Co.,Ltd. is one of the leading Manufacturers and Suppliers of 1-5TPH small Stainless cheap palm oil equipment.Shandong Leader Machinery Co.,Ltd. manufacture 1-5TPH small Stainless cheap palm oil equipment making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Full Continuous Refining Line for you reference,such as 1-5TPH small Stainless cheap palm oil equipment ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Full Continuous Refining Line.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for 1-5TPH small Stainless cheap palm oil equipment, inform us raw material you want to use for 1-5TPH small Stainless cheap palm oil equipment,and specific requirements for 1-5TPH small Stainless cheap palm oil equipment.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Full Continuous Refining Line.