1. Description of Full Continuous Refining Line:
Chinese fabricator for small cold oil press machine is based on the difference of oil and the impurities in the physical and chemical properties, separate the grease and impurity by some technical ways ,in order to improve the oil edible,storage stability and safety process.Chinese fabricator for small cold oil press machine is divided into chemical refining and physical refining.The mini crude oil refinery we adopt suits different kinds of vegetable oil process.According to the raw materials and capacity , we can use batch, continuous, physical and chemical refining design. The product mini crude oil refinery of edible oil equipment can reach first to fourth grade. Guarantee the highest quality in lowest cost.
Capacity of Chinese fabricator for small cold oil press machine:5TPD-1000TPD
2.Full Continuous Refining Line process:
Main process of Chinese fabricator for small cold oil press machine:
**Hydration Deguming & Alkali Refining Deacidification Process
**Continuous Refining Decoloring Process
**Continuous Refining Deodorizing Process
**Automatic Control System of refined canola oil price equipment and so on
3.Advantages of Full Continuous Refining Line:
**The oil fully contacting with the decolorant can improve the decolorization efficiency and reduce the usage of decolorant.
**The continuous and uniform material flows of crude oil refinery will balance the decoloring time and avoid the recovery of grease oxidation and acid value.
**The special mixing structure of decoloring tower won't cause the material dead area, which can avoid the adsorbent sedimentation and pipe blockage.
**The continuous airtight efficient filtration equipment of crude oil refinery has realized the automation of cake discharge and reduced the labor intensity.
**The advanced drying technology of crude oil refinery can reduce the oil content in filter cake.
Chinese fabricator for small cold oil press machine
WHAT OILSEEDS ARE AVAILABLE??
ABOUT LD HOME OIL PRESS:
Screw Oil Press Structure
Screw oil press is a popular type of oil press machine, mainly composed of feeder, gearbox, pressing chamber and oil receiver. Some screw oil press machines are equipped with electric motors as required. Pressing chamber is the key part which contains a pressing cage and a screw shaft rotating in the cage. An electric cabinet is also necessary to control the whole working procedure.
Screw Oil Press Features
Different from the automatic screw oil press, this screw oil press has its own features and markets.
1. Made of high quality steel, wear-resistant and easy to clean.
2. With the properly designed pressing chamber, the increased pressure in the chamber highly improves working efficiency.
WHAT'S THE MACHINE LIKE??
HOW TO OPERATE EXPELLER:
1. Prepare the seeds;
2. Adjust the machine, such as electricity, heating (optional);
3. Start the machine, putting seeds into the feeder;
4. Seed into the screw bolt , begin to press
5. The crude oil comes out of the squeezing bolt, then flow into the board ,
6. Go into the vacuum filter, using it for filtration
7. After filtration, the oil comes out from the bottom of pipe
WHAT WILL BE PRODUCT OIL LIKE?
PARAMETERS FOR 6YL SERIES EXPELLER:
Item |
6YL-80 |
6YL-100 |
6YL-120 |
6YL-130 |
|||
Speed of press screw |
30-45r/m |
30-40r/m |
30-40r/m |
28-40r/m |
|||
Gear ratio of gear case |
14/42x19/57=1:6.63 |
15/40x15/55=1:9.78 |
15/34x15/55=1:9.59 |
15/38x19/48=1:7.38 |
|||
Boundary dimension |
1650*1150*1750 |
1950*1300*1900 |
2050*1350*2000 |
2200*1600*2150 |
|||
Handling capacity |
80-150kg/h |
150-250kg/h |
200-300kg/h |
250-400kg/h |
|||
Weight |
760kg |
950kg |
1100kg |
1300kg |
|||
Power |
Main engine |
Y160L-6-5.5KW |
Y160M-6-7.5KW |
Y160L-6-11KW |
Y180L-6-15KW |
||
Vacuum pump |
Y90S-4-0.55KW |
Y90S-4-1.1KW |
Y100L1-4-1.5KW |
Y100L1-4-2.2KW |
|||
Heater |
2KW |
3KW |
3.3KW |
3.8KW |
|||
WHAT CERTIFICATES DO LD HAVE?
Still have questions?
What should you do??
Do not worry!
SAM is always here!!
Just Contact SAM!!!
Shandong Leader Machinery Co.,Ltd. is one of the leading Manufacturers and Suppliers of Chinese fabricator for small cold oil press machine.Shandong Leader Machinery Co.,Ltd. manufacture Chinese fabricator for small cold oil press machine making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Full Continuous Refining Line for you reference,such as Chinese fabricator for small cold oil press machine ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Full Continuous Refining Line.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for Chinese fabricator for small cold oil press machine, inform us raw material you want to use for Chinese fabricator for small cold oil press machine,and specific requirements for Chinese fabricator for small cold oil press machine.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Full Continuous Refining Line.