LD perfect automatic oil press machine 6yl series, cooking oil pressing machine south africa
1.Palm Fruit Processing Line parts use high quality of imported bearing and oil seal to ensure high efficient driving, stable and low niose operation.
2.Shandong Microwave Machinery Co.,Ltd.Independent research and development of large air shaft without hoop equipment, overtuns the traditional process, make LD perfect automatic oil press machine 6yl series, cooking oil pressing machine south africa more stable and reduce the cost maintenance time of Palm Fruit Processing Lineusers.
3. Add LD perfect automatic oil press machine 6yl series, cooking oil pressing machine south africanon-stop refueling system, automatic system for the butter, air cooling system, high efficiency, low energy consumption, smooth operation, the Palm Fruit Processing Line quality is stable and reliable.
4. Shandong Microwave Machinery Co.,Ltd. product with high automation which can save labor, and LD perfect automatic oil press machine 6yl series, cooking oil pressing machine south africa is also easy to maintain which save lots of maintance time.
LD perfect automatic oil press machine 6yl series, cooking oil pressing machine south africa
LD press machine:
Parameters of LD press:
| Model | 6YL-80 | 6YL-100 | 6YL-120 | 6YL-130 |
| Screw speed | 30-45r/min | 30-40 r/min | 30-40 r/min | 28-40 r/min |
| gear ratio | 14/42x19/57=1:6.63 | 15/40x15/55=1:9.78 | 15/34x15/55=1:9.59 | 15/38x19/48=1:7.38 |
| Dimension | 1650x1150x1750 | 1950x1300x1900 | 2050x1350x2000 | 2200x1600x2150 |
| Productivity | 80-150kg/h | 150-250kg/h | 200-300kg/h | 250-400kg/h |
| Power | Y160L-6-5.5KW | Y160M-6-7.5KW | Y160L-6-11KW | Y180L-6-15KW |
| Vacuum pump | Y90S-4-0.55KW | Y90S-4-1.1KW | Y100L1-4-1.5KW | Y100L1-4-2.2KW |
| Heater | 2KW | 3KW | 3.3KW | 3.8KW |
Way to operate LD Machine
1. After installing the machine, check whether lubricant has been filled in, bolts have been tightened, and handles are operable.
2. Check large pulley whether it is loose or blocked, repair it if necessary
3. Adjust the tightness of the belt. Switch on the motor and check its rotation direction.
4. Loosen the lock nut, rotate the adjusting handle and tighten the screw to its end, then loosen it for 3-4 circles and tighten again for half circle to assure the gap of the residue cake outlet.
5. Feeding must be steady and slow at the beginning to avoid blocking.
6. In case no cake is extruded outward, return back the screw for 1-2 circles. If there is still no cake being observed, machine needs to be shut down and checked. However, in any case, operating the machine backwards is absolutely prohibited. Normally, cake looks like tile but not sticky; thickness is 1-2mm inner side is smooth, outer side creases and no oil on the surface is allowed Cake thickness adjustment: Rotating the adjusting handle clockwise will make the cake thicker, anticlockwise, thinner. Each circle of adjustment will change the thickness 0.4-0.5mm
7. When machine is operating, oil extruding and residue outlet need to be checked frequently. Normally, most of oil will flow outwards from square rods and several front round plates. Broken cake residue indicates the material is too dry; steam emerging from the cake residue indicates that it is too wet; In any case, water content in the raw material must be adjusted from time to time. Slag ice emerging indicates high water content; powder-like slag, low water content. Loose round plates will cause too much slag flowing outwards. However, adequate water content will not cause slag flowing outwards from square rods. Yet, little slag from round plates is allowed. In a word, water content affects oil output rate, so it needs adjusting properly
8. Stop the machine: Repeatedly move screw forwards and backwards for several times and let all material resided in the chamber go out and adjust the cake to a thickness as thin as possible, then stop the machine. When machine stops by any accident, power supply must be shut down first, then rotate large pulley manually backwards to let the material turn out. Then pull out the shaft and clean it in case the shaft couldn't be pulled out, remove the upper case and loosen lock nut, separate round plates and clean them one by one.
LD shipping:
Still have questions?
What should you do??
Do not worry!
CARRIE is always here!!
Just Contact CARRIE!!!
Shandong Microwave Machinery Co.,Ltd.is a Palm Fruit Processing Line factory specializing in the production of LD perfect automatic oil press machine 6yl series, cooking oil pressing machine south africa, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide Palm Fruit Processing Linecustomers with design and services of 1-2000 tons LD perfect automatic oil press machine 6yl series, cooking oil pressing machine south africa. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects Palm Fruit Processing Lineover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, seCARRIEe oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type Palm Fruit Processing Lineoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. Palm Fruit Processing Lineequipment has been successfully exported to more than ten countries: Russia, Australia, India, Afghanistan, Cameroon,and so on.
Contact us:
Carrie-Sales manager
Shandong Microwave Machinery Co.,Ltd.
Web: www.epier.com
Email: [email protected]
Skype:leaderfoodmachine10
Moblie:0086-15020017267(also WhatsApp)