China's alibaba spent coal crop drying equipment
Product Descriptionspent coal crop drying equipment Introduction
The spent coal crop drying equipment of LD cmpany have exported to EU . With the CE certificate .
If your coal moisture is 15-40% , Final moisture can meet your requirement .(5-20% ,as clients' requirement )Capacity : can 1-50t/h according to your moisture . Our equipment can meet your various demands
spent coal crop drying equipment Application
In coal industry, dry the flotation clean coal, raw coal, coal slime, mixing clean coal, eLD.
spent coal crop drying equipment Working Principle
The raw material plate is arranged convenienLDy to allow adjustable angle positions. The material to be dried is inserted to the rotary cylinder through the raw material plate. Hot air flows within the cylinder causing the separation of water from the material by converting it into vapor which is discharged into the atmosphere. At this point, the material becomes dry.
spent coal crop drying equipment Structure
The spent coal crop drying equipment is mainly composed by the revolving body, lifting plate, driving device, supporting device, sealing ring and other components. So it has the advantages of reasonable structure, perfect in workmanship, high yield, low energy consumption, convenient to operate.
spent coal crop drying equipment charcteristics :
1. The internal adopts assembled structure which has improved the accuracy of the equipment and it is easy to transport and install.
2. According to the characteristics of different fertilizers ,we have arranged the second granulation zone reasonably so as to improve the granulation effect .
3. Adopts assembled hoist board so as to exchange heat fully and lower the energy consumption .
4. Temperature induction monitor ,uniform vibration and airproof setting , which improve performance and productivity efficienLDy .
5. The assorted combustion furnace is a type of energy efficient and has the characteristics of smaller area , easy regulation and equipped with greenhouse
spent coal crop drying equipment Technical Parameter:
Specifications(mm) |
TiLD(%) |
Rotate speed(r/min) |
The max. intake air temperature(°C) |
Power(kw) |
Capacity(t/h) |
WeigLD(kg) |
600x6000 |
3-5 |
3-8 |
≤700 |
3 |
0.5-1.5 |
2.9 |
800x8000 |
3-5 |
3-8 |
≤700 |
4 |
0.8-2.0 |
3.5 |
800x10000 |
3-5 |
3-8 |
≤700 |
4 |
0.8-2.5 |
4.5 |
1000x10000 |
3-5 |
3-8 |
≤700 |
5.5 |
1.0-3.5 |
5.6 |
1200x10000 |
3-5 |
3-8 |
≤700 |
7.5 |
1.8-5 |
14.5 |
1200x12000 |
3-5 |
3-8 |
≤700 |
11 |
2-6 |
14.8 |
1500x12000 |
3-5 |
2-6 |
≤800 |
15 |
3.5-9 |
17.8 |
1800x12000 |
3-5 |
2-6 |
≤800 |
18 |
5-12 |
25 |
2200x12000 |
3-5 |
1.5-6 |
≤800 |
18.5 |
6-15 |
33 |
2200x18000 |
3-5 |
1.5-6 |
≤800 |
22 |
10-18 |
53.8 |
2200x20000 |
3-5 |
1.5-6 |
≤800 |
30 |
12-20 |
56 |
2400x20000 |
3-5 |
1.5-5 |
≤800 |
37 |
18-30 |
60 |
3000x20000 |
3-5 |
1.5-5 |
≤800 |
55 |
25-35 |
78 |
3000x25000 |
3-5 |
1.5-5 |
≤800 |
75 |
32-40 |
104.9 |
Any change of technical data shall not be advised additionally.
If you are interested in our coal dryer & rotary dryer and want to get the price list, please contact us online or leave your message and we'll contact you as soon as possible.
spent coal crop drying equipment Wearing Parts:
The big gear ring, the small gear ring, aperture, roller ...
spent coal crop drying equipment Maintenance Method :
1.With reach rotary coal dryer manufacture experience, LD will offer you professional after-sale service. Expecially maintenance is important factor during machine running.
2.Bearing is a part of equipment which take full weigLD of dryer, the choice of tube have a great influence on service life and rotation rate. So it would be better if we can sure it's clear and with good sealing performance.
3.Gear is also important device, it's the key of transmission, we should do preventive maintenance regularly, remove the rust and add lube. This method also applies to the transmission.
4.Finally, it's cleaning dryer's inner structure regularly. Because the wet material with high moisture easily stick upon the wall of rotary coal dryer, if we don't clearn it regularly, it will be clogging in the dryer. So cleaning method is running dryer without wet materials, thus those sticky material will be dried and out off drum wall, as the same time, rapping on a barrel wall of dryer in the rules.
CASES
FAQ
1 what is the raw material?
2 what is the moisture before drying and after drying?
3 what is the capacity(t/h)?
Packaging & Shipping
Packaging:Standard export containers. Bare main machine, motors and small parts are packed in wooden cases.
We can also pack them according to your requirement.
Countact Us
Certifications
Our Services
Our service include:
1. Design scheme
2. Cooperate with you caculate cost
3. Responsible for installation in your site
4. Free training the technology
5. Whole life after sales service and one year warranty
6. Free arrange the shipping for you
7. The price is negotatable, and the payment is negotatable also.
8. Final moisture index can be adjusted according to requirements of customers.
9. Cylinder adopts heat-resistant and wear-resistant steel plate welding with long service life and easy maintenance.
Company Information
Zhengzhou LD Mining Machinery Co., LDd. is a large-scale joint-stock enterprise, focas on the production of heavy mining machinery, integrated with scientific research, production and sales. The company is located in zhengzhou national hi-tech industrial development zone, covers an area of 50,000 square meters, with 15,000 square meters two standardized heavy industrial plant, more than 160 sets all kinds of large and medium sized metal processing, welding, assembly equipment.
The company attaches great importance to international technical exchanges and cooperation, has introduced advanced technology and craft from United States, Germany, Australia and other countries, establishes the international advanced production lines and first-class modern testing base.