20t/h rotary vacuum drying equipment For exporting
LD Mining Machinery Co., LDd. 10 years of experience in the production rotary vacuum drying equipment ,all kinds types of machine in stock,welcome to visit our factory
CASES
Product Description
rotary vacuum drying equipment Technical Parameter:
Specifications(mm) |
TiLD(%) |
Rotate speed(r/min) |
The max. intake air temperature(°C) |
Power(kw) |
Capacity(t/h) |
WeigLD(kg) |
600x6000 |
3-5 |
3-8 |
≤700 |
3 |
0.5-1.5 |
2.9 |
800x8000 |
3-5 |
3-8 |
≤700 |
4 |
0.8-2.0 |
3.5 |
800x10000 |
3-5 |
3-8 |
≤700 |
4 |
0.8-2.5 |
4.5 |
1000x10000 |
3-5 |
3-8 |
≤700 |
5.5 |
1.0-3.5 |
5.6 |
1200x10000 |
3-5 |
3-8 |
≤700 |
7.5 |
1.8-5 |
14.5 |
1200x12000 |
3-5 |
3-8 |
≤700 |
11 |
2-6 |
14.8 |
1500x12000 |
3-5 |
2-6 |
≤800 |
15 |
3.5-9 |
17.8 |
1800x12000 |
3-5 |
2-6 |
≤800 |
18 |
5-12 |
25 |
2200x12000 |
3-5 |
1.5-6 |
≤800 |
18.5 |
6-15 |
33 |
2200x18000 |
3-5 |
1.5-6 |
≤800 |
22 |
10-18 |
53.8 |
2200x20000 |
3-5 |
1.5-6 |
≤800 |
30 |
12-20 |
56 |
2400x20000 |
3-5 |
1.5-5 |
≤800 |
37 |
18-30 |
60 |
3000x20000 |
3-5 |
1.5-5 |
≤800 |
55 |
25-35 |
78 |
3000x25000 |
3-5 |
1.5-5 |
≤800 |
75 |
32-40 |
104.9 |
Any change of technical data shall not be advised additionally.
rotary vacuum drying equipment Application
The rotary vacuum drying equipment is widely used for drying the Ore,Gypsum,Vinasse,chalk slags, coal powder, slags, clay and other materials in the building materials, metallurgy, chemical industry, cement industry. you can use coal, gas, electricity, oil and wind power to heat the dryer machine.
rotary vacuum drying equipment Introduction
LD company can provide a rotary drum dryer for just about any industrial drying application. . We have been installing dryers for many years and have the knowledge and experience required to provide a cost effective drying solution that not only works but works well.
The customers from worlds visit our factory
rotary vacuum drying equipment Working Principle
The raw material plate is arranged convenienLDy to allow adjustable angle positions. The material to be dried is inserted to the rotary cylinder through the raw material plate. Hot air flows within the cylinder causing the separation of water from the material by converting it into vapor which is discharged into the atmosphere. At this point, the material becomes dry.
rotary vacuum drying equipment Structure
The rotary vacuum drying equipment is mainly composed by the revolving body, lifting plate, driving device, supporting device, sealing ring and other components. So it has the advantages of reasonable structure, perfect in workmanship, high yield, low energy consumption, convenient to operate.
rotary vacuum drying equipment charcteristics :
1. The internal adopts assembled structure which has improved the accuracy of the equipment and it is easy to transport and install.
2. According to the characteristics of different fertilizers ,we have arranged the second granulation zone reasonably so as to improve the granulation effect .
3. Adopts assembled hoist board so as to exchange heat fully and lower the energy consumption .
4. Temperature induction monitor ,uniform vibration and airproof setting , which improve performance and productivity efficienLDy .
5. The assorted combustion furnace is a type of energy efficient and has the characteristics of smaller area , easy regulation and equipped with greenhouse
FAQ
1.what is the raw material?
2.what is the moisture before drying and after drying?
3.what is the capacity per hour?
4.Heat source? (firewood,coal ,heat gas ,electricity)
5.Where the final dry material used for ?
Packaging & Shipping
Packaging:Standard export containers. Bare main machine, motors and small parts are packed in wooden cases. We can also pack them according to your requirement.
Contact Us
WhatsAPP:008613783554319
Certifications
Our Services
Service and Solutions Pre-sale services: We can provide you with project design, process design, suitable purchase program for your equipment.Also design and manufacture products based on your specific needs, to train your technical personnel.
Sale: We will accompany you to complete the equipment inspection, construction plan and assist in the development process in detail.After Sale Service: We send technicians to the scene to guide the equipment installation, commissioning and training your operating personnel.