Chinese mini improved small press oil machine
LD'E MAIN BUSINEDD SCOPE:
10-500T/H oil material first cleaning, drying and storage section turn-key project;
100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot
peeling, bean skin crushing; the soybean extrusion, high oil contained pre-press cake extrusion,
and high oil contained embryos puffed; of direct puffed). Rice bran production line turn-key
project;
100~300TPD Leaching workshop turnkey project (Towline extractor, Rotocel extractor, loop
type extractor, DTDC separated machine, the full negative pressure evaporation, paraffin wax
recovery, leaching workshop degum, phospholipid concentrate);
30-1000T/D oil continuous grade one or two physical (chemical) refining production line;
20-3000T/D sunflower oil, rice bran oil, corn germ oil dewaxing turn-key project;
10-200T/D Fatty acid esterification production cooking oil production line.
WHAT IS THE SCREW PRESS MACHINE LIKE??
BRIEF INTRODUCTION OF PRETREATMENT/PEPRESS:
Seeds→Magnitic seperating→Cleaning →Husking→ Flaking→Cooking →Pressing
FUNCTION OF MAIN EQUIPMENTS:
1. Raw material: peanut, soybean, rapeseed, sesame, sunflowerseeds, linseed, pumpkin seeds, cottonseed etc.
2. Magnetic separator: Clearing the iron impurity which might be in the seed.
3. Cleaning: This parts have different size cleaning sieves to clean the different impurities.
4. Husking:this can help improve the oil yield from seed,and reduce wear to the machine .
5. Flaking: making use of the mechanical action to flake the seed into flakiness.
6. Cooker: This machine can adjust the water content of the seed. It’s also good for edible oil processing machine and oil extraction section.
ON-SITE PRESSING:
WHAT SERVICE DO WE SUPPLY??
1. Whole set of equipment for production line;
2. Motor and power control system;
3. Installation material;
4. Drawing of process description, equipment layout, foundation and
5. Hole, construction;
6. Drawing of power control;
7. Staff training and long-term technical service.
The processing plants can be divided into two kinds:
One is hot processing, which includes steam cooker and oil press. The steam cooker is used for oilseeds pretreatment before pressing.
The other is the cold processing. The advantage of this kind of machine is the lower temperature when press the seeds. It is about 80 degree, which can protect the nutrition element in the oil.
WHAT CERTIFICATES DO LD'E HAVE??
Still have questions?
What should you do??
Do not worry!
SAM is always here!!
Just knock me!!!