Conventional thermo - thermal sterilization often has heat loss in the environment and equipment, and microwave is directly acting on food, so there is no extra heat consumption. In comparison, the general energy saving is 30%-50%.
Conventional thermo - thermal sterilization starts from the surface of the material, but there is an internal and external temperature difference through the heat conduction to the interior. In order to maintain the food flavor, shorten the processing time.
Often the food inside does not reach enough temperature to affect the germicidal effect. Due to the penetration of microwave Ken, when the food is treated as a whole, the surface and the interior are simultaneously affected, so disinfection and sterilization are even and complete.
Product Description
Evolution I , Biomass Gasification Burner
1. Working principle:
Biomass gasification is a high temperature for a variety of physical and chemical reaction process. It was based on the biomass as raw material, with air as the gasification agent, under the condition of high temperature by chemical reactions into the process of gas fuel. In turn, after drying, pyrolysis, oxidation and reduction stage. Biomass after high temperature reaction is decomposed into three categories of products.
1. Combustible smoke (mainly for the CO, H2, CH4 and other mixed gases)
2. Liquid (tar, also can burn)
3. Solid ash carbon
2. Parts of the Burner:
3.Application scope of biomass burner:
Wide application scopes: Suitable for steam boiler, fuel oil, gas, coal boiler, various kinds of organic spray drying equipment, large-scale farming factories, cereal and food drying, tobacco drying, various kinds of large, medium, small workshops, greenhouse heating and etc.
4. Compared with traditional direct-fired burner:
|
Convert to biomass gasification burner |
Convert to direct-fired burner |
Ash content when flame fly out |
Very little-0 |
High |
Heat efficiency |
95% |
75% |
Change of existing equipment |
No need to replace heat exchanger, aluminum/zinc melting furnace, Not request ash cleaning for the original heat exchanger, boiler often |
Need to replace heat exchanger, aluminum/zinc melting furnace, Need ash cleaning for the original heat exchanger, boilers frequently |
Reforming time |
2H ~1 Day |
2~4 Day |
Reforming cost |
Half cost compared with direct-fired |
High |
Spare part cost |
Low ,nozzle can last2-3year,no grate cost |
High ,nozzle need replace every 6month,grate 1-2year |
Feeding system |
No feeding key or feeding motor |
Feeding key easy broken when material stuck |
Maintenance |
Portable, simple maintenance |
Heavy not easy move, maintenance difficult |
Operated fuel |
Fuel wood(trunk, branch leaf and wood dust), crop straw, rice husk, peanut shell, corn cob, biomass forming fuel and so on |
Wood pellet |
Company Information
Export record
LD biomass burner export to Canada, Russia, Ukraine , Serbia ,Bulgaria, India, Pakistan, Vietnam, Indonesia,Philippine, Thailand, Malaysia, Korea and Taiwan ect.
Our Services
Our Service
1.Pre-sale service
Provide professional suggestion from corresponding pre-sale service engineers and consulting service, customized design solution.
2.After-sale service
First time installation or commissioning train operators service available home or abroad, technical service
3.Tracking service