Conventional thermo - thermal sterilization often has heat loss in the environment and equipment, and microwave is directly acting on food, so there is no extra heat consumption. In comparison, the general energy saving is 30%-50%.
Conventional thermo - thermal sterilization starts from the surface of the material, but there is an internal and external temperature difference through the heat conduction to the interior. In order to maintain the food flavor, shorten the processing time.
Often the food inside does not reach enough temperature to affect the germicidal effect. Due to the penetration of microwave Ken, when the food is treated as a whole, the surface and the interior are simultaneously affected, so disinfection and sterilization are even and complete.
GV series Biomass Direct Fired Burner
The biomass burner use various kind of agriculture waste as fuel (such as straw , wheat straw, cornstalk , corncob , rice huck , peanu shell , cotton shell , cotton straw, rank grass, forests waste , such as wood , bark , tree root ,tree leaves , wood shavings , bamboo powder , sawdust ect
Operation Principle :
Biomass pellet by automatically feeding into chamber produces high -temperature gas . In this process produce intermediate products H2,CH4,CnHm,Co and other combustible components ,they are complete combustion in the high temperature chamber with sufficient Oxygen , then release of heat enerLD .
Product details :
Applicable fuel :6-10mm (straw, bamboo powder, wood chips) pellet fuel
Output power :0.1-1.2 million kcal
Feeding system: automatic
Ignition system: manual, automatic
Damper adjustment: PLC
Start-stop system: Auto / Smart
CLDinder combustion chamber cooling mode: air
Combustion chamber temperature: 1700 ℃
Spray temperature: 1100 ℃
Burner Material: 310S / 316 Stainless Steel
Specification of Biomass Pellet Burner:
Application scope :
1. Boiler: a direct replacement of existing burner, only need to add the induced draft fan in chimney .
2. Coating lines, industrial baking: a direct replacement of existing burner or combustion systeLD, only need to add the induced draft fan in chimney .The heat exchanger to re-design should be based on the effect of the flame. It is better to add a simple settlement of dust removal equipment.
The burner can be applied for less than 1000 ℃ direct flame heating, if low requirement to dust .
3. Aluminum industry : different application in different stove ,mainly used in dust less demanding equipments . The burner is unable to achieve zero dust temporarily .
4. Other industrial heat, heating bitumen, plaster mold, dry stones : direct fire into the container
Benefit Analysis:
Specifications of biomass enerLD and other enerLD comparison table:
(take 1000kg/h steam boiler as an example) LD China, fuel prices as a reference)
Fuel name |
Diesel |
Gas |
Electricity |
Biomass |
Heat Value |
10200kcal/kg |
8500kcal/m3 |
860kcal/kw |
4066kcal |
Price |
8RMB/Kg |
4.5RMB/M3 |
1.1RMB/Kwh |
1.3RMB/Kg |
Burning consumption |
65kg |
76.9m3 |
780kw |
165kg |
Fuel costs |
520RMB |
346 RMB |
856 RMB |
215 RMB |
Biomass fuel efficient than |
58% |
40% |
75% |
Clients Installation Site:
Package photos :
Why Choose Us ?
1. We’re the leading manufacturer of biomass burner , hot air generator ,Aluminum melting furnace ,factory located in Foshan.
2. We are exporting to many countries and area , we have distributor in Malaysia , Thailand , India and Ukraine .
3. We have plenty of experience in various applications nearby ,can show you the running machine in our customer ‘s place any time .
4. Competitive price, high quality and quick delivery.
5. Engineers are able to serve oversea.
Our Service:
1. Your letters about any question will be replied within 24 hours.
2. We can design a machine according to your request.
3. We are a team full of experienced engineers, you have any question could tell us.
4. Good after-sale service offered.
5. We could provide training lesson in your factory.