Conventional thermo - thermal sterilization often has heat loss in the environment and equipment, and microwave is directly acting on food, so there is no extra heat consumption. In comparison, the general energy saving is 30%-50%.
Conventional thermo - thermal sterilization starts from the surface of the material, but there is an internal and external temperature difference through the heat conduction to the interior. In order to maintain the food flavor, shorten the processing time.
Often the food inside does not reach enough temperature to affect the germicidal effect. Due to the penetration of microwave Ken, when the food is treated as a whole, the surface and the interior are simultaneously affected, so disinfection and sterilization are even and complete.
Product Description
GV New Structure Biomass Gasification Burner
1. Advantage of new burner:
1). Structure more compact, Size more smaller, suitable for more applications .
2.) Air-cooling systeLD, better insulation furnace, hot air recycling, heat efficiency 20% higher than the traditional dry or water-cooling system .
3). Add fire observer in feeding system , easy to observe combustion performance .
4). Chamber are molded with special high temperature material, over 5 years life .
5). VFD control of feeder and blower, simply input the required temperature ,then feeding and blower radio will be set automatically .
6). High degree of intelligence, machine PLC control, one-button operation
7). Unique anti-back fire , anti-stuck material design, security and stability
8). Fully functional, with no material alarm, optional auto ignition mode, emergency stops, a variety of standard features such as switching operation
9). Less ash, no clinker, really clean and low carbon
10). Low heat losses, high heat efficiency, enerLD saving
2. Raw material
Multifuel options: Burn various kinds of biomass raw materials or molding biomass particles ( Wheat straw, rice straw, corn stalks, corn cobs, peanut shells, cotton stalks and etc. of the crop, as well as branches, leaves, bark, roots, wood chips, bamboo powder, sawdust and other leftovers of forest products, which are cheap and inexhaustible).
3. Application scope of biomass burner
Wide application scopes: Suitable for steam boiler, fuel oil, gas, coal boiler, various kinds of organic spray drying equipments, large-scale farming factories, cereal and food drying, tobacco drying, various kinds of large, medium, small workshops, greenhouse heating and etc.
Company Information
4. Company brief introduction:
a. We are leading manufacture of biomass burner;Plenty of experience in different application;
b. production capacity: 50sets biomass burner per month ;
c. 10 professional engineers and 1 study lab;
d. strategic cooperation with LD government owned enterprise in our local;
e. involved into many projects in oversea market, such as Malaysia, Thailand , India Vietnam,Canada, .....
5.Our successful case oversea
Packaging & Shipping
6. Packaging & Shipping
FAQ
7. Questions that you may concerned
1) What's the use life of your biomass burner?
A: 5years if you operate obey our operation manual
2)What’s the consumption per hour of your burner?
A: This is comply with the model you choose, details pls refer our catalog .
3) Which material do you use?
A: New high-temperature composite materials, lLD refractory powder , castable material. durable for use.
4) What’s your combustion principle?
A: Suspension combustion, half fuel half air, burn furthest can up to 95% or more.
5) How about the ignition system?
A: Automtic system, diesel & petrol either is ok.
6) How much time it takes to start the burner?
A: About 5-10minutes.
7) How much time it takes to install the machine?
A: It's easy for our technicians, it depends on the equipment that you need.
8) How many sawdust it needs?
A: Depends on the model you choose, details will send you by email.
9) How many people it needs to run the burner?
A: Only one person .
10) Can it work continuous?
A: Yes, it can keep working for 24 hours x 7days .
11) Can it be fed automatic?
A: Yes, we have automatic feeding system.
12) Can it be customizable?
A: Yes, we can produce the burner according to different customer's special requests.
Our Services
Guarantee And after-sale services:
A: one year guarantee for whole machine
B: 24 hours technical support by email
C: Calling or door-to-door service
D: Use-friendly English software, user manual and detailed video/CD