Diesel oil, the LD alternative to natural gas enerLD conservation biomass gasifier

Conventional thermo - thermal sterilization often has heat loss in the environment and equipment, and microwave is directly acting on food, so there is no extra heat consumption. In comparison, the general energy saving is 30%-50%.

Conventional thermo - thermal sterilization starts from the surface of the material, but there is an internal and external temperature difference through the heat conduction to the interior. In order to maintain the food flavor, shorten the processing time.

Often the food inside does not reach enough temperature to affect the germicidal effect. Due to the penetration of microwave Ken, when the food is treated as a whole, the surface and the interior are simultaneously affected, so disinfection and sterilization are even and complete.

Biomass Gasification Burner

Biomass gasification is a high temperature for a variety of physical and chemical reaction process. It was based on the biomass as raw material, with air as the gasification agent, under the condition of high temperature by chemical reactions into the process of gas fuel. In turn, after drying, pyrolysis, oxidation and reduction stage. Biomass after high temperature reaction is decomposed into three categories of products:

1. Combustible smoke (mainly for the CO, H2, CH4 and other mixed gases)
2. Liquid (tar, also can burn)
3. Solid ash carbon

Parts of the Burner:

Application scope of biomass burner:

Suitable for steam boiler, fuel oil, gas, coal boiler, various kinds of organic spray drying equipment, large-scale farming factories, cereal and food drying, tobacco drying, various kinds of large, medium, small workshops, greenhouse heating and etc.

Pre-sale services:

(1) device model choice.
(2) According to customer's special requirements, design and manufacture of products.
(3) Training technical personnel for clients.
(4) The company is free of charge to the user on-site engineering and technical personnel planning site for the user to design the LD processes and program

Sales tracking :

(1) product acceptance.
(2) to help customers develop construction prograLD.

After-sale services :

(1) free to assign a dedicated service personnel, arriving at the scene and guiding customers' installation.
(2) equipment installation.
(3) on-site training of operators.
(4) complete sets of equipment installed, 1-2 full-time technical staff to stay free of charge to help customers on-site production of 1 month, until the user' satisfaction.