LD Walnut Oil Presser

LD Walnut Oil Presser produced and supplied by Shandong Microwave Machinery Co.,Ltd.
When operating, the good processed oil material into the pressing chamber fom hopper of Rapeseeds oil machinery, and the screw rotate to
push-in the material of Rapeseeds oil machinery for squeezeing. For the material is conducted in the motion state, under high pressure
of chamber, the material, screw, and chamber have a great friction resistance, which resulting in relative motion.
On the other hand, due to te screw diameter of LD Walnut Oil Presser is grudually thickening, the screw pitch is gradually declining, so when the screw rotating, the thread can move the embryo forward, also an flip them outward, at the same time
the material close to the screw can rotate with the thread. So every LD Walnut Oil Presser is with different speed and direction
moving, with the moving between embryo, all the friction generate heat satisfy the needs of oil process operation of Rapeseeds oil machinery ,helps to denaturation embryo protein, destorys the colloid, increases the plasticity, also reduces the viscosity and easy to precipitate oil. Thus LD Walnut Oil Presser increasing the yield efficiency.

1-2TPD Walnut Oil Presser

1-2T/D Walnut Oil Presser Introduction:

Working principle of Walnut Oil Presser:

1.When oil press is on work, material enters the extruding chamber from the hopper and then moves forwards by the rotating pressing screw and is pressed.

2.Under high temperature condition in the chamber, there is quite strong friction among press screw, chamber and the oil materials.

3.On the other hand, root diameter of the pressing screw carries larger from one end to the other.

4.Hence when rotating, the thread not only pushes particles moving forwards but also turns them outwards as well.

5.Meanwhile, particles adjacent the screw will rotate along with screw’s rotating, causing every particle inside the chamber to possess different speed.

6.Therefore, relative movement among particles creates neat which is necessary during manufacturing because of helping protein change property, damage colloid, increase plasticity, decrease oil’s elasticity, resulting in high oil.

Main equipment:
Neutralize pot: used to acid refining, alkali refining and washing.
Decoloring pot: used to bleaching grease and get rid of pigment.
Deodorization pot: used to remove grease’s stink, machine’s raw material is stainless steel.
Conductive oil boiler: supply the heating that needs during produce, temperature up to 280℃.
Vacuum pump: supply the vacuum for decoloring and deodorization sections, up to above 755mmHg.

Operating introduction:
Tip: different oil has different operation conditions, follow information only for reference.
The preparation before open the machine:
1.Test the crude oil first, measure acid value and color, also can do small sample test in lad if condition allowed.
2.Connect cooling water.
3.Prepare clay, NaOH, coal.
4.Connect electricity.
5.Check vacuum pump, air compressor, pressure filter, conductive oil pump.
6.Conductive oil must be heated about 5 hours when temperature is 98℃, every time you change it, if there is no water vapor overflow from elevated tank, then the temperature can heated up to 280℃.

Walnut Oil Presser can be packed in 20ft container, or LCL

1-2T/D Walnut Oil Presser:

1. Turnkey Project Accepted;

2.Installation and Commissioning Guidance Supply;

3. 1 Year gurantee, long term technical support;

4.Training your local staff;

5.MSK long term cooperation shipping line;

1-2T/D Walnut Oil Presser Answer:

1.Price:

High quality with most reasonable price supply, more purchase orders, more favorable price!

2.. Quality Inspection:

Raw Material:Steel is purchased from Anyang Steel Factory(Famous brand);

Infrastrure: Rolling Machine, Cutting Machine, CNC, Auto welder, X-ray test, etc. When you come to visit factory, we can show you how 10TPD Sesame Oil Refining Machine is produced.

3.Production Period:

10TPD Sesame Oil Refining Machine needs 45 working days;

Shandong Microwave Machinery Co.,Ltd.is a Rapeseeds oil machinery factory specializing in the production of LD Walnut Oil Presser, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide Rapeseeds oil machinerycustomers with design and services of 1-2000 tons LD Walnut Oil Presser. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects Rapeseeds oil machineryover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type Rapeseeds oil machineryoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. Rapeseeds oil machineryequipment has been successfully exported to more than ten countries: Russia, Australia, India, Afghanistan, Cameroon,and so on.

Contact us:

Carrie-Sales manager

Shandong Microwave Machinery Co.,Ltd.

Web: www.epier.com

Email: [email protected]

Skype:leaderfoodmachine10

Moblie:0086-15020017267(also WhatsApp)