Low rice Almond oil pressing machine produced and supplied by Shandong Microwave Machinery Co.,Ltd.
When operating, the good processed oil material into the pressing chamber fom hopper of Rapeseeds oil machinery, and the screw rotate to
push-in the material of Rapeseeds oil machinery for squeezeing. For the material is conducted in the motion state, under high pressure
of chamber, the material, screw, and chamber have a great friction resistance, which resulting in relative motion.
On the other hand, due to te screw diameter of Low rice Almond oil pressing machine is grudually thickening, the screw pitch is gradually declining, so when the screw rotating, the thread can move the embryo forward, also an flip them outward, at the same time
the material close to the screw can rotate with the thread. So every Low rice Almond oil pressing machine is with different speed and direction
moving, with the moving between embryo, all the friction generate heat satisfy the needs of oil process operation of Rapeseeds oil machinery ,helps to denaturation embryo protein, destorys the colloid, increases the plasticity, also reduces the viscosity and easy to precipitate oil. Thus Low rice Almond oil pressing machine increasing the yield efficiency.
Low price Almond oil pressing machine
The operation and maintenance of screw press machine:
Preparations before working
Keep the room temperature between 15~20℃, it’ll influence the oil yield and oil quality if the temperature is too low.
Get everything ready before start pressing, so it can contribute to feeding, receive oil, clean impurities, dredge hopper and clean machines.
Check the transmission and lubrication system, make sure it can run flexibly and lubricate sufficiently.
After starting the machines, let it run empty. If it lets out stridulation, knocking noise and other off-normal occurrence, stop machines immediately and check the press, you can keep testing after clear the troubles, till the press run stably.
Before oil seeds go into pressing, the moisture should be suitable, the optimal moisture content should be as below:
Peanut: 8~11% soybean: 5~8% cotton seed: 4~6% rapeseed: 6~8%
The ways to distinguish moisture content in the oil seeds:
Cottonseed: It is good when you bite it, and it cracks, shell and kernel are separated, if the cottonseed kernel becomes powder, it is too dry, while it’s too wet if it becomes flakes.
Soybean: it is good to hear the quiet sound when you crunch with front tooth, bit flat with gills teeth. It’s too wet if it’s bit flat, while it’s too dry while it make larger noise.
Peanut: Usually it’s processed with hot pressing, the barrel should be pre-heating before hot pressing, the peanut should be cooked up to 60℃ or so, then go to pressing.
Rapeseed: For cold pressing, it is good when you use the fingernail to pinch it and it makes sound, divided into two pieces
Operation
When the machines run freely normally, feed small amount of oilseeds uniformly slowly, so as to grind the machine chamber, checking whether it’s normal or not when the cakes come out. If it can’t be discharged smoothly, it may be the reason of too small gap, adjust hand wheel clockwise. If the cakes are discharged too much too fast, adjust hand wheel counterclockwise till it can work normally. Then increase the input capacity gradually, so as to avoid non-uniform feeding, loading rise suddenly, resulting in blockage.
The working temperature of press machine depends on the oil seeds variety and humidity. The higher machine temperature is needed if the input material is too dry, on the contrary, the temperature can be lower. Normally, the oil can be extracted out when the machine temperature is about 60℃. The normal production can be started when you can feel it’s hot while you touch the machine body.
Adjust the meal thickness to 0.3mm~1.0mm, adjust nut and increase feeding capacity when it reaches requirement.
Check the cake discharging frequently during the production. Stop feeding when the cake can’t be discharged smoothly or non-discharging.
Clean the slag leakage constantly so as to avoid blocking of oil-way. The recycled slag can be feed back to hopper and press again.
During the second pressing, the meal should be broken into 10mm or so pieces, and this can avoid disordered feeding. Normally, soybean is pressed 2 times, peanut and cottonseed can be pressed 2~3 times.
The machine should be stopped immediately and clean it, once the metal or other tough substances are found in the chamber.
Close the bottom spile in the feed inlet and stop feeding 1~2 minutes before stop the machine. Make screw go backward by 2~3 cycles, so the residues can be discharged.
Maintenance service
Lubricate each part with grease or machine oil regularly. The machine oil can be added to common copper sheathing and adjusting screw sheathing after 4~6 working hours. The rolling bearing should be cleaned and refilled grease after 3~4 months’ usage.
Inspect press machine after 3~4 months’ running.
Inspecting items: adjust the concentric between squeezer shaft and chamber; check the abrasion of spare parts such as worm, cage bar and cake-discharging rings etc. The abrasion of worm usually happens at the last 3 buckles of screw thread. It should be replaced with new ones after the abrasion and it affect the production efficiency. The cage bar may become arc-shaped after abrasion and this will reduce the chamber pressure. When the abrasion loss reaches 2mm, we can change the other side for using. It should be replaced with new one when the both sides are abrased.
Packaging & Shipping
Almond Oil Press Machine can be packed in wooden case, several 40ft containers.
Shandong Microwave Machinery Co.,Ltd.is a Rapeseeds oil machinery factory specializing in the production of Low rice Almond oil pressing machine, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide Rapeseeds oil machinerycustomers with design and services of 1-2000 tons Low rice Almond oil pressing machine. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects Rapeseeds oil machineryover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type Rapeseeds oil machineryoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. Rapeseeds oil machineryequipment has been successfully exported to more than ten countries: Russia, Australia, India, Afghanistan, Cameroon,and so on.
Contact us:
Carrie-Sales manager
Shandong Microwave Machinery Co.,Ltd.
Web: www.epier.com
Email: [email protected]
Skype:leaderfoodmachine10
Moblie:0086-15020017267(also WhatsApp)