35TPD peanut extract machine

35TPD peanut extract machine produced and supplied by Shandong Microwave Machinery Co.,Ltd.
When operating, the good processed oil material into the pressing chamber fom hopper of Rapeseeds oil machinery, and the screw rotate to
push-in the material of Rapeseeds oil machinery for squeezeing. For the material is conducted in the motion state, under high pressure
of chamber, the material, screw, and chamber have a great friction resistance, which resulting in relative motion.
On the other hand, due to te screw diameter of 35TPD peanut extract machine is grudually thickening, the screw pitch is gradually declining, so when the screw rotating, the thread can move the embryo forward, also an flip them outward, at the same time
the material close to the screw can rotate with the thread. So every 35TPD peanut extract machine is with different speed and direction
moving, with the moving between embryo, all the friction generate heat satisfy the needs of oil process operation of Rapeseeds oil machinery ,helps to denaturation embryo protein, destorys the colloid, increases the plasticity, also reduces the viscosity and easy to precipitate oil. Thus 35TPD peanut extract machine increasing the yield efficiency.

35TPD peanut extract machine

peanut extract machine

steps:

1. Deshelling: the shell of the peanuts must be removed before being processed, the shell is very active, which can influence the oil pressed rate a lot.
2. Screening: the seeds shall be cleaned before being crushed or soften, the impurities in the seeds will make the oil quality bad, and make it hard to refine. It is necessary to remove all the impurities includes big and small ones.
3. Destoning and magnetic separating: the metal matters and small stones must be removed, they will abrade the machine badly, and also will influence the oil quality a lot.
4. Crushing: the seeds shall be crushed into small pieces, which can make it easier for the oil to be pressed out. Usually it shall be crushed into 6-8 pieces.
5. Softening: after crushing ,softening shall follow, the crushed pieces shall be in good state, which has the most suitable moisture and temperature state. And then, the oil will be pressed out very easily.
6. Flaking: after being soften, the seeds will have very good flexibi8lity, it can be flaked into average flakes, which has the equal thickness, and is in the best station to be finally pressed to oil.
7. Cooking: the last step before pressing is cooking, the cooked material is of good smell, what’s more, it can raise the oil pressed rate.
8. Pressing: screw oil press designed by our company has very unique character, it can work under any condition, with less power, which can save energy, it also has a rater higher oil pressed rate and less residual rate. The residual is less than 6%.
9. Filtering: the crude oil shall be filtered to remove the small impurities in the oil. We do have blade filters, bag filters, plate filters and so on, according to different material and capacity, we do suggest different types.
10. Solvent extraction: for big capacity, normally more than 30tons per day, after being pressed, there is still some residual in the cake, if the cake is not used to the fullest, it will be a waste. By using solvent extraction technology, the residual can be reduced less than 0.5%, which means you can get at least more than 8% oil per unite. According to different requirement, we will suggest customers to use rotocel, loop and drag chain extractor.
11. Refinery: according to customers’ requirement and the capacity asked, we do suggest different equipment and technology, normally if the capacity is 1-10TPD ,We do suggest batching refinery, if it is 10-20TPD, we do suggest semi continuous, and if it is more than 20TPD, we do suggest continuous refining.
12. Fractionation or dewaxing: for crude oil of sunflower, red seed, corn, palm, rice bran ,the wax in the oil shall be removed. The crystallization, filtering and cooling system designed by us is unique and highly spoken of by customers all over the world.

The cold pressing of peanut extract machine

The pressing solvent extration of peanut extract machine

The small refining of peanut extract machine

The continuous refining of peanut extract machine

Projects done of peanut extract machine

Shandong Microwave Machinery Co.,Ltd.is a Rapeseeds oil machinery factory specializing in the production of 35TPD peanut extract machine, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide Rapeseeds oil machinerycustomers with design and services of 1-2000 tons 35TPD peanut extract machine. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects Rapeseeds oil machineryover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type Rapeseeds oil machineryoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. Rapeseeds oil machineryequipment has been successfully exported to more than ten countries: Russia, Australia, India, Afghanistan, Cameroon,and so on.

Contact us:

Carrie-Sales manager

Shandong Microwave Machinery Co.,Ltd.

Web: www.epier.com

Email: [email protected]

Skype:leaderfoodmachine10

Moblie:0086-15020017267(also WhatsApp)