Professional technoloLD castor oil press machinery

Professional technoloLD castor oil press machinery

Oil Pretreatment & Oil Pressing Processing Line of castor oil press machinery

The simple processing of oil pretreatment includes pressing, high temperature pressing, cold pressing (less than 70 degrees) etc.

1,Formal oil pressing can adopt one time or twice pressing of oilseeds. It is applicable for low capacity required oil processing oil plant.
2,High capacity oilseeds pretreatment and oil pressing equipped with oil extraction treatment, is used in high capacity and large-scale oil pressing plant, or high oil content oilseeds processing plant.
3,Oil prepressing can get up 70% oil fat of embryo, and residual oil inside pre-pressed cake can be extracted by organic solvent.

Oil Extraction Machine of castor oil press machinery

Requirements for extraction cake ,steam ,water. electricity etc:

1,Moisture of extraction material: 5-8%;

2,temperature of extraction material: 50-55°C;

3,oil content of extraction material:14-18%;

4,thickness of extraction cake : less than 13mm;

5,powder porosity of extraction material: less than 15% (30 mesh);

6,steam : more than 0.6Mpa;

7,solvent : national standard No. 6 solvent oil;

8,electric power:50HZ 3*380V±10%

Electric ligLDing : 50HZ 220V ±10%;

9,tempreture of supplement water : less than 25°C,

Hardness : less than 10.

10,volume of supplement water: 1-2m/t raw material;

11,temperature of recycle water: less than 32°C.

Oil Refinery of castor oil press machinery

castor oil press machinery pictures

If you need our oil press machine,Please contact us by email or phone.