industrial horno secado de hierbas

Shandong Leader Machinery Co.,ltd. have engaged in Oil Refinery Equipment and Microwave Equipment since1997 in China,with 20 years` experience and 80 engineers,, scientific research, manufacturing, installation, commissioning.We can provide customers with design and services of 1-2000 tons oil equipment.factory occupied area is over 100,000 square meters,more than 3200 customers all around the world, we greatly hope to have the opportunity to serve you.

Product Description:
According to customers on the type of oil, daily processing volume, oil standards and other conditions of the requirements of processing customization, size, refining the number of cans, product prices are different.

Specifications

industrial microwave herbs drying oven

A brief description

1 retain freshness
2 energy saving
3 heating rapidly
4 cover less area

The instructions of industrial mirowave herbs drying oven :

Drying is due to food and water vapor partial pressure inside and outside different process in the internal moisture to the surrounding air. Microwave dielectric heating and traditional heating drying equipment. When moisture content is above 50%, as the moisture content decreased, dielectric constant and dielectric loss factor will be reduced, especially at high temperature.

Moisture content is below 30%, the microwave penetration depth will increase significantly. Due to uneven temperature distribution and difficult to control the product in the terminal temperature of low moisture content components, microwave heating equipment will produce adverse effect on product quality.

The reason that choose the industrial microwave herbs drying oven:

In the hot air drying, effective operating temperature range in the 60-90 °C, dry fruits and vegetables need 15 h time. In the process of the constant speed drying, the drying rate is determined by the energy transfer to the speed of food wet surface. Due to the evaporative cooling, the temperature of the product to lower than the later in the drying process. Once the surface is dry, from the inside to the surface of the mass transfer rate to keep the surface of the water permeability.

In the falling rate drying stage, diffusion rate determines the drying rate, and decrease with the content of water molecules. Due to the material surface evaporation cooling effect is reduced, resulting in surface temperature. Under the hot air drying temperature, volatile flavour compounds of group branch loss, structural changes, such as: hardening inhibits after drying, and drying time was prolonged, thereby resulting in the destruction of vitamins, color and flavor of the chemical and enzymatic reaction.

Microwave drying, microwave for material inside and outside the heating process at the same time. Materials due to the internal and external temperature at the same time, and the material surface is direct contact with air, so the internal temperature of the material will be slightly higher than the surface temperature. At the same time the moisture inside the material by the external to internal migration, the material surface, evaporation and air.
Thus, microwave drying, the drying speed is higher than other drying methods.

The parameters for industrial microwave herbs drying oven:

1. Power supply	380V±10% 50HZ±1% three-phase five-wire
   Microwave Output Frequency	2450±50MHz
   Microwave input apparent power	42KVA
   Microwave output power	30KW
   Microwave power adjustment range	0-30KW(adjustable)
   Ambient temperature	-5-40°C
   Dehydrate	30kg/h
   Relative humidity	80%, Surrounding environment:no corrosive gas, conductive dust and explosive gas
   Overall dimension(L*W*H)	10680*820*1750mm
   Transmission speed	0-10m/min(adjustable)
   Height of the inlet and outlet	60 mm
   Microwave leak	accord with a country GB10436-89 standards(
   Equipment safety	accord with GB-5226Electrical safety standard accord with a country GB16798-1997 Food machinery health security index

industrial horno secado de hierbas is suitable for the normal pressure/micropressure/water decoction/warm maceration/hot reflux forced circulation/permeation extraction & concentration,organic solvent recovery concentration and other processes in Chinese traditional medicine, health products, biological, pharmaceutical, cosmetic and food industries.This is the ideal equipment for Shandong Leader Machinery Co.,ltd., research institutes,research and development departments and laboratories of enterprises and institutions,and many varieties,small batch production of pharmaceutical plant.

AAA1
industrial horno secado de hierbas future
1.Fast heating speed: directly heat on the internal and external of material at the same time, do not need to preheat. While there must be a preheating process in the traditional production.
2. Heating evenly: microwave drying is completed through electromagnetic waves produced by magnetron.The internal and external of material will be heated at the same time .
3. Less nutrition loss: material just stay in the microwave heating box for a short time, and do not need air and steam to conduct heat, therefore can maximize keep nutrients in the material.
4. Sterilization and alcoholization:The microwave drying equipment also have sterilizing and alcoholizing function.
5. Reduce the labor intensity, improve work efficiency

AAA2

If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.

LD Miss Candy
Skype: leaderfoodmachine9
Mobile: +86 18363700691 (Also WhatsApp & Wechat)
Email: [email protected]