50-200TPD soya bean oil extraction machine with good price
The feature of soya bean oil extraction machine:
1. Adopt stainless steel fied grid plate and increase the horizontal grid plates, which can prevent the strong miscella from flowing back to the blanking case, so as to ensure good etraction effect;
2. The rotocel etractor is driven by rack, with unique rotor of balanced design, low rotating speed, low power, smooth operation, no noise and quite low maintenance cost;
3. The feeding system can adjust the rotating speed of airlock and main engine according to the feeding quantity and maintain a certain material level, which is beneficial to the micro negative pressure inside the etractor and reduce the solvent leakage.
4. The advanced miscella circulation process is designed to reduce the fresh solvent inputs, reduce the residual oil in meal, improve the miscella concentration and save enerLD by reducing the evaporation capacity.
5. The high material layer of the etractor helps to form immersion etraction, reduce the meal quality in miscella, improve the quality of crude oil and reduce the evaporation system scaling. 6. Specially suitable for the etraction of various pre-pressed meals.
The paratemer of soya bean oil extraction machine:
| Capacity | 300T/D |
| Residual oil in meal | 1% (soybean) |
| Solvent consumption | 2Kg/T (No.6 solvent oil) |
Crude oil moisture and volatile matter |
0.30% |
| Power consumption | 15KWh/T |
| Steam consumption | 280KG/T (0.8MPa) |
| Finished meal moisture | 13% (adjustable) |
| Residual solvent in finished meal | 300PPM (qualified detonated eperiment) |
The process of soya bean oil extraction machine:
(1) The plant seedoil (for pretreatment) is sent to rotary etraction by the scraper conveyor. The plant seed oil will etracted by the solvent or mi oil. After this step, we will get meal and mi oil.
(2) Meal is send to toaster. Through the toaster, the solvent in the meal will seperate from the meal. The solvent goes to condenser and is recycled to rotary etraction.
(3) After the mi plant oil from the rotary etraction enters into 1st evaporator and 2nd evaporator, most of the solvent in the plant seed oil is separated.
(4) The mi plant oil from 2nd evaporator goes to stripping tower and almost all the solvent is separated. From the stripping tower, we can get crude plant seed oil and solvent. The solvent is sent to condenser and is recycled to rotary etraction.
The design drawing
We have custoLD all over the world:
Now look at our factory:
Our honor should be more convincing: