If you interesting in kiln dryer for wood in China is popular,
Ask me freely by email/whatsapp/Skype, Shandong Industrial Microwave Oven can give technical support and service.
Please metioned below information in your enquriy.
1.What's your raw material? How about the form of your products?
2.How much moisture content before drying and after drying?
3.How many input and output capacity per hour?
Once confirm above details,we can provide a suitable solution for you.
In addition,Shandong Industrial Microwave Oven not only manufacture Drying Equipment ,but also have oil press and refined oil equipment for peanut, soybean, rapeseed, cottonseed, sunflower, sesame, animal,grape seed, acer truncatum, peony seed, walnut, hemp seed, pine, tea seed, papaya, milk thistle seed, and other special material.
Expect to help you and cooperate with you in near future.
Contact Shandong Industrial Microwave Oven
Miss Jessica
Skype: leaderfoodmachine1
Mobile: +86 15964025360 (Also WhatsApp & Wechat)
Email: [email protected]
kiln dryer for wood in China is popular
Product DescriptionShandong Leader Machinery Co., Ltd. has 10 years sawdust,wood dryer production experiences,1tph-100tph dry equipments with new design,it can drying the moisture 10-70% wood,sawdust.After drying the moisture is 0%-20%(It is according to your requirement ).The dryer will design with your inquire.Welcome to our manufaturer!
kiln dryer for wood Introduction
Leader company can provide a rotary drum dryer for just about any industrial drying application. We can provide triple pass or single pass drum dryer design with natural gas burners or one of our biomass fired sawdust burners. We have been installing dryers for more than 15 years and have the knowledge and experience required to provide a cost effective drying solution that not only works but works well.
kiln dryer for wood Application
Used for drying the Sawdust, wood chips, peanut shell, rice husk,biomass and so on..
kiln dryer for wood Structure
kiln dryer for woodis composed of hot stove, feeding port, rotating cylinder, filter cartridges, material conveying pipe, cooling tube and discharging port; rotating cylinder is located in the active roller, which takes low-speed rotation; the feeding port is set between heating furnaces and rotary cylinder, the rotating cylinder is equipped with a fry blade and the baffle has an orifice; one end of the filter cartridge is connected to the rotating cylinder and the other end is connected to material conveying pipe
kiln dryer for wood Working Principle
kiln dryer for wood is composed of hot stove, feeding port, rotating cylinder, filter cartridges, material conveying pipe, cooling tube and discharging port; rotating cylinder is located in the active roller, which takes low-speed rotation; the feeding port is set between heating furnaces and rotary cylinder, the rotating cylinder is equipped with a fry blade and the baffle has an orifice; one end of the filter cartridge is connected to the rotating cylinder and the other end is connected to material conveying pipe.
kiln dryer for wood Technical Parameter:
Specifications(mm) |
Tilt(%) |
Rotate speed(r/min) |
The max. intake air temperature(°C) |
Power(kw) |
Capacity(t/h) |
Weight(kg) |
600x6000 |
3-5 |
3-8 |
â¤700 |
3 |
0.5-1.5 |
2.9 |
800x8000 |
3-5 |
3-8 |
â¤700 |
4 |
0.8-2.0 |
3.5 |
800x10000 |
3-5 |
3-8 |
â¤700 |
4 |
0.8-2.5 |
4.5 |
1000x10000 |
3-5 |
3-8 |
â¤700 |
5.5 |
1.0-3.5 |
5.6 |
1200x10000 |
3-5 |
3-8 |
â¤700 |
7.5 |
1.8-5 |
14.5 |
1200x12000 |
3-5 |
3-8 |
â¤700 |
11 |
2-6 |
14.8 |
1500x12000 |
3-5 |
2-6 |
â¤800 |
15 |
3.5-9 |
17.8 |
1800x12000 |
3-5 |
2-6 |
â¤800 |
18 |
5-12 |
25 |
2200x12000 |
3-5 |
1.5-6 |
â¤800 |
18.5 |
6-15 |
33 |
2200x18000 |
3-5 |
1.5-6 |
â¤800 |
22 |
10-18 |
53.8 |
2200x20000 |
3-5 |
1.5-6 |
â¤800 |
30 |
12-20 |
56 |
2400x20000 |
3-5 |
1.5-5 |
â¤800 |
37 |
18-30 |
60 |
3000x20000 |
3-5 |
1.5-5 |
â¤800 |
55 |
25-35 |
78 |
3000x25000 |
3-5 |
1.5-5 |
â¤800 |
75 |
32-40 |
104.9 |
Any change of technical data shall not be advised additionally.
kiln dryer for wood Wearing Parts:
The big gear ring, the small gear ring, aperture, roller ...
Cases
FAQ1.what is the raw material?
2.what is the moisture before drying and after drying?
3.what is the capacity per hour?
4.Heat source? (firewood,coal ,heat gas ,electricity)
5.Where the final dry material used for ?
Packaging & Shipping
Packaging:Standard export containers. Bare main machine, motors and small parts are packed in wooden cases.
We can also pack them according to your requirement.
Contact us
Certifications
Our Services
Service and Solutions
Pre-sale services: We can provide you with project design, process design, suitable purchase program for your equipment.Also design and manufacture products based on your specific needs, to train your technical personnel.
Sale: We will accompany you to complete the equipment inspection, construction plan and assist in the development process in detail.
After Sale Service: We send technicians to the scene to guide the equipment installation, commissioning and training your operating personnel. Company Information
Shandong Leader Machinery Co., Ltd. is a large-scale joint-stock enterprise, focas on the production of heavy mining machinery, integrated with scientific research, production and sales. The company is located in zhengzhou national hi-tech industrial development zone, covers an area of 50,000 square meters, with 15,000 square meters two standardized heavy industrial plant, more than 160 sets all kinds of large and medium sized metal processing, welding, assembly equipment.
The company attaches great importance to international technical exchanges and cooperation, has introduced advanced technology and craft from United States, Germany, Australia and other countries, establishes the international advanced production lines and first-class modern testing base.