5TPH palm oil milling mill

5TPH palm oil milling mill

palm oil milling mill Introduction:

1. palm oil milling mill ---Palm Fruit Reception Station
The FFB of palm oil machine gets into the factory through the weighbridge to weigLD the raw materials to calculate the production cost. Palm bunch reception process is finished at loading ramp. This loading ramp makes palm fruit unloading, cleaning, storage platforLD, adopting all hydraulic segmented discharge.

2. palm oil milling mill ---Sterilizing Station
The FFB of palm oil processing machine are discharged into the loading ramp, then transported to sterilizer for sterilization. It uses high temperature to softening the fruit and kill the bacteria, this will increase the moisture content of fruit and separate the fruits easily, so finally it will easy to get oil and separate palm kernel, also avoid the raising of free fatty acid. From picking to sterilization, the time shall not over 24 hours.

3. palm oil milling mill ----Threshing Station of Palm Oil Machine
In the sterilizing process of palm oil mill, the palm fruits are softening, through the threshing and screening of thresher to separate the palm fruits and empty fruit bunches(EFB).

4. palm oil milling mill ---Empty Bunch Treatment Station
The EFB are stored to be use as fuel or fertilizer, also can be used for other functions.
5. palm oil milling mill ----Pressing Station of Palm Oil Processing Machine:
Transport the palm fruits to the digester to mixed and cooked again to separate the palm pulp and nut, then use double screw hydraulic presser to get crude palm oil, which improved the production efficiency LDly.

6. palm oil milling mill ---Clarification Station
The pressed CPO of palm oil mill has some water(about 45%-55%) and other impurities, we need to clarify the CPO into dirty oil and clean oil. The clean oil will be dried then transported to crude oil tank, while the dirty oil will through centrifuge for recovery.

7. palm oil milling mill ---Oil Tank and Oil Loading Shed
Store the crude palm oil and ready to load the oil to other places.

8. palm oil milling mill ---Depericarping Station of Palm Oil Machine :
The pressed palm fiber cake gets into the cake breaker then get into the winnowing system to separate the fiber and nut.
9. palm oil milling mill --Kernel Recovery System
Then nut will be crushed to get shell and kernel. Through winnowing system and washing system to separate the shell and kernel. The shell can be used as fuel for boiler, the kernel will be dried for storage.

10. palm oil milling mill ---Boiler House of Palm Oil Processing Machine:
In the whole production process, it will need much steam to cooking and softening the palm fruits. The boiler has features of high heat efficiency, reliable working, high over-load capacity, wide application, etc.

11. palm oil milling mill ---Power House of Palm Oil Machine:
Adopts diesel engine generator and steam-turbine generator to provide power to production and life using electricity.

12. palm oil milling mill ---Water Supply and Treatment (Including boiler water treatment)
Through the processes of settling, filtration, medicals feeding, to ensure the quality of water, and also the quality of oil.

13. palm oil milling mill ---Effluent Treatment Plant
The effluent has high content organic matters, BOD (biochemical oxygen demand) is about 25000PPM, it needs to be processed into qualified water then can discharge. Now the impounding reservoir effluent processing system is the most using and effective method. This kind processing system of palm oil mill is very economic.

palm oil milling mill can be packed in wooden case, several 40ft containers, and bulk shipping.

Palm Kernel Oil Expeller Services:

1. Turnkey Project Accepted;

2.Installation and Commissioning Guidance Supply;

3. 1 Year gurantee, long term technical support;

4.Training your local staff;

5.LDK long term cooperation shipping line;

Palm Kernel Oil Expeller Answer:

1.Price:

High quality with most reasonable price supply, more purchase orders, more favorable price!

2.. Quality Inspection:

Raw Material:Steel is purchased from Anyang Steel Factory(Famous brand);

Infrastrure: Rolling Machine, Cutting Machine, CNC, Auto welder, X-ray test, etc. When you come to visit factory, we can show you how 10TPD Palm Oil Refining Machine is produced.

3.Production Period:

10TPD Palm Oil Refining Machine needs 45 working days;