Manual oil press introduction as follows :
Mainly technical parameters of Manual oil press :
Oil material |
Oil press rate (%) |
Thickness of the material slag |
Residual oil ratio (%) |
sesame |
42-55 |
1.0-1.5 |
≤7 |
peanut |
40-50 |
0.8-2 |
≤8 |
rapeseed |
28-43 |
1.0-1.5 |
≤8 |
Sunflower seeds |
30-40 |
1.2-1.5 |
≤8 |
Soy bean |
10-16 |
0.8-1.5 |
≤7 |
1. Before press oil seeds, please adjust the temperature and speed of the Manual oil press.
2. About the speed, it is arrive 100 celsius degree.
3. Put the oil seeds into the feeder, then begin the pressing.
4. Oil will come out from the squeezing bolt.
5. Flow into the filter.
6. Us the filter to filter simply crude oil.
7. Then into the storage tank.
Manual oil press prepared to delivery
Mainly include three parts of Manual oil press :
1. main engine 2. hydraulic system 3.electrical system
1) Main Engine of Manual oil press
Main engine includes base, upright, top plate, oil drip pan nut and so on , it is one of the main parts. Firstly the oil material is put into the assembly of the press boring,
then it being droved up by the oil cylinder piston, oil will outflow from the gap of press boring, and then pass the oil drip pan to the drum for oil storage.
2) Hydraulic System of Manual oil press
Hydraulic system is the main power force of this machine, it includes transmission shaft, turbine, worm gear, gear pump, high pressure pump, overflow valve;
super high pressure safety valve; hand-operated valve; seamless steel tube; pipeline connect and other spare parts. This machine adopts the advanced power pack of the world,
and compared with two plunger pump, it is faster, higher pressure and can resist higher temperature, it can continue working when the oil temperature is above 65 without cooling unit.
3) Electronic System of Manual oil press
Electronic system is the most advanced part of this machine, it is fully automatic, easy to operate, and there’s no special request to the operator, so this machine is particularly suitable for peasant.
This machine is composed of motor, volt meter, pressure gauge, power insurance and so on. It is the most advanced equipment which can replace the manual operation of the sesame oil.
This machine can press at least 2 to 7 kilograms per batch, the time is about 4 to 6 minutes.
Packaging & Shipping
Packing : Packed by the protect film inner, water-repellent plastic outside. The wood packing is necessary if send by less than a container. it will fixed by steel rope in the container.
Make sure it is in good condition when arrived destination.
Shipping : 30 days after receiving your L/C or deposit
Our Services
Dear Sir, when you need edible oil machine, cooking oil making machine,
Vegetable oil processing machine, please send me email about your requirement.
Skype: goldLD04
Thank you for your time!
Company Information
If you need find reliable and professional Chinese supplier to provide
high quality Edible oil factory, contact us please.
Tel: 0018236935730
Our workshops
