Automatic Hydraulic mustard oil mill

Application of Auxiliary Machine For Oil Press:
peanut kernel, sesame seeds, soybean,(almond)Apricot kernel, pumpkin seed kernel,
Sunflower kernel,Camellia seed kernel,rapeseed, flaxseed,Fire hemp seed,pinenut kernel. etc.
Features of Auxiliary Machine For Oil Press:
1.Screw Oil Press/Cold Oil
2.Household Equipment
3.Stainless Steel Material
4.Lower Price

Hydration Deguming & Alkali Refining Deacidification Process
Neutralization: the crude oil is output by the oil feed pump from the oil tank, and next enters the crude oil heat exchanger to recover part of heat after metering and then is heated to the required temperature by the heater. After that, the oil is mixed with the metered phosphoric acid or citric acid from phosphate tank in the gas mixture (M401), and then enters the conditioning tank (R401) to make the non-hydratable phospholipids in oil change into the hydratable phospholipids. Add the alkali for neutralization, and the alkali quantity and alkali solution concentration depend on the quality of the crude oil. Through the heater, the neutralized oil is heated to the temperature (90°C) suitable for centrifugal separation to remove the phospholipids, Auxiliary Machine For Oil PressA and other impurities in the crude oil. Then the oil goes to the washing process.

Washing: there is still about 500ppm soap in the neutralized oil from the separator. To remove the remaining soap, add into the oil about 5~8% hot water, with water temperature 3~5 °C higher than the oil generally. To achieve more stable washing effect, add phosphoric acid or citric acid when washing. The re-mixed oil and water in the mixer is heated to 90-95°C by the heater, and then enters the wash separator to separate the remaining soap and most water. The water with soap and oil enters into oil separator to separate out oil in the water. Further catch the oil outside, and the waste water is discharged to the sewage treatment station.
Vacuum drying stage: there is still moisture in the oil from the wash separator, and the moisture will affect the stability of the oil. So the oil at 90°C should be sent to vacuum drier to remove the moisture, and then the dehydrated oil goes to the decoloring process. Finally, pump out the dry oil by canned pump.If you are interested in our company,please feel free to contact Ms. Myra for a quotation,(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).You will get superior service,and Shandong Leader Machinery Co.,Ltd. produce Automatic Hydraulic mustard oil mill with high quality, high performance and the best prices.

Continuous Refining Decoloring Process
The main function of decoloring process is to remove oil pigment, residual soap grain and metal ions. Under negative pressure, the mechanical mixing method combined with steam mixing will improve the decoloring effect.
The degummed oil firstly enters into the heater to be heated to the appropriate temperature (110°C), and then goes to the bleaching earth mixing tank. The bleaching earth is delivered from the low bleaching box to the temporary tank by wind. The bleaching earth is added by automatic metering and is interlockingly controlled with the oil.
The oil mixed with the bleaching earth overflows into the continuous decolorizer, which is stirred by non-powered steam. The decolored oil enters into the two alternate leaf filters to be filtered. Then the filtered oil enters the decolored oil storage tank through the security filter. The decolored oil storage tank is designed as the vacuum tank with the nozzle inside, so as to prevent the decolored oil contacting with the air and influencing its peroxide value and color reversion.

Specifications

Automatic Hydraulic mustard oil mill

Contact:Annie

Tel:+86 15237168511

Skype:goldpenguin9713

1. Mustard oil mill advantages

It is a new designed machine on the base of abroad similar product. The machine is specialized in processing sesame, peanut, walnuts, almonds, flax etc.

Features:

1) Easy to operate

2) High oil yield

3) It can finish processing 10~15kgs material in 8~10 minutes

4) Installation and training covered in China

This machine presses the fried seeds in the barrel, it’s easy to operate, and you can get fragrant edible oil directly. It just takes several minutes to get the healthy product oil.

2.Hydraulic mustard oil mill types

3.The main parts and features of mustard oil mill

1>Main parts: transmission case, hydraulic cylinder, valve, column, removable cap, foundation, feed cylinder, switch box, pressure gage, automatic temperature control device, etc. It’s made from No 45 and No 27 SiMn steel casting die and some other superior mental materials, so it lengthen it life-time and performance.

2> Hydraulic transmission components:

Main parts: it contains driving worm, worm gear, bent axle, high-pressure pump, gear pump, one-way valve, hydrocylinder, hydraulic tube.

Our company also improved the Hydraulic triplex plunger pump, combining with the domestic and abroad high-tech.

Features: high efficiency, high pressure, steady upper pressure, high oil yield, resist to high temperature, continuable working, well-loved by both the new and former customers

3) Performance for the main parts of hydraulic double cylinder and features:

Cylinders are made up of hydraulic cylinder body, valve, cylinder gland, inner hexagon screw, oil seal (made from imported polyurethane material, resist to high-temperature, high pressure and anti-friction, long life time)

Features:

l Using the oil pump to transfer the oil to the hydro-cylinder, so it can make the valve go up and down quickly; costs short time, high efficiency, high automation; no need to worry about Don't drop cylinder;

l Easy to operate, time efficiency, high paid back.

Our machines aren’t like the other domestic and abroad similar products, For the other regions’ machines, Since the fall the hydraulic oil will be pretty dense in a short time, especially in winter, it’ll be worse; the aging of oil seal make the oil seal can’t drop naturally, so worker needs to make it drop with hammer and stuff, the hydraulic oil will be replaced several times per time, so that costs more labor, energy and time, it may even make the machine can’t run regularly and influence the benefit.

The electrical control part is made up of hydraulic pressure indicator, mico-electric temperature controller, electro connecting pressure gauge, contactor, relay, red-ray heating tube, electrical machine etc.

Screw mustard oil mill types:

Main advantages of high efficiency automatic mustard oil expeller

1. High oil yielding, low oil residual in the cake:The oil left in cake is less than 6%. The cake thickness can be adjusted once the machine stops running;

2. Compact size: only 10-20m2 is enough.

3. High purity: machine surface is made of chrome plated stainless steel, in line with food hygiene standards.

4. Easy operation. You should operate as per the instruction.

5. Components:Screw pressing part, Electrical controlling system, automatic heater, adjusting mechanism, driving unit and vacuum oil filter etc.

6. Multifunctional:used for pressing soybean, sunflower seeds, peanut, sesame, rapeseeds, flax seed, camellia, cotton seed, cashew, hemp seed, linseeds, coconut(copra), palm, palm kernel, pumpkin seeds, and walnuts and all the oil crops.

7.Convenient and safe: concise structure, small occupation area, it use the fully enclosed protection,convenient and safe operation

Our main business:

• 10-500T/H oil material first cleaning,drying and storage section turn-key project.
• 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot peeling, bean skin crushing; the soybean extrusion, high oil contained pre-press cake extrusion, and high oil contained embryos puffed; of direct puffed). Rice bran production line turn-key project.
• Leaching workshop turnkey project (Towline extractor, Rotocel extractor, loop type extractor, DTDC separated machine, the full negative pressure evaporation, paraffin wax recovery, leaching workshop degum, phospholipid concentrate).
• 30-1000T/D oil continuous grade two or one physical (chemical) refining production line.
• 10-600T/D sunflower oil, rice bran oil, corn germ oil dewaxing turn-key project
• 10-200T/D Fatty acid esterification production cooking oil production line.

Welcome to visit our website:

http://goldpenguin.en.alibaba.com/

Shandong Leader Machinery Co.,Ltd. is one of the leading Manufacturers and Suppliers of Automatic Hydraulic mustard oil mill.Shandong Leader Machinery Co.,Ltd. manufacture Automatic Hydraulic mustard oil mill making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Auxiliary Machine For Oil Press for you reference,such as Automatic Hydraulic mustard oil mill ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Auxiliary Machine For Oil Press.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for Automatic Hydraulic mustard oil mill, inform us raw material you want to use for Automatic Hydraulic mustard oil mill,and specific requirements for Automatic Hydraulic mustard oil mill.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Auxiliary Machine For Oil Press.