Application of Auxiliary Machine For Oil Press:
peanut kernel, sesame seeds, soybean,(almond)Apricot kernel, pumpkin seed kernel,
Sunflower kernel,Camellia seed kernel,rapeseed, flaxseed,Fire hemp seed,pinenut kernel. etc.
Features of Auxiliary Machine For Oil Press:
1.Screw Oil Press/Cold Oil
2.Household Equipment
3.Stainless Steel Material
4.Lower Price
Hydration Deguming & Alkali Refining Deacidification Process
Neutralization: the crude oil is output by the oil feed pump from the oil tank, and next enters the crude oil heat exchanger to recover part of heat after metering and then is heated to the required temperature by the heater. After that, the oil is mixed with the metered phosphoric acid or citric acid from phosphate tank in the gas mixture (M401), and then enters the conditioning tank (R401) to make the non-hydratable phospholipids in oil change into the hydratable phospholipids. Add the alkali for neutralization, and the alkali quantity and alkali solution concentration depend on the quality of the crude oil. Through the heater, the neutralized oil is heated to the temperature (90°C) suitable for centrifugal separation to remove the phospholipids, Auxiliary Machine For Oil PressA and other impurities in the crude oil. Then the oil goes to the washing process.
Washing: there is still about 500ppm soap in the neutralized oil from the separator. To remove the remaining soap, add into the oil about 5~8% hot water, with water temperature 3~5 °C higher than the oil generally. To achieve more stable washing effect, add phosphoric acid or citric acid when washing. The re-mixed oil and water in the mixer is heated to 90-95°C by the heater, and then enters the wash separator to separate the remaining soap and most water. The water with soap and oil enters into oil separator to separate out oil in the water. Further catch the oil outside, and the waste water is discharged to the sewage treatment station.
Vacuum drying stage: there is still moisture in the oil from the wash separator, and the moisture will affect the stability of the oil. So the oil at 90°C should be sent to vacuum drier to remove the moisture, and then the dehydrated oil goes to the decoloring process. Finally, pump out the dry oil by canned pump.If you are interested in our company,please feel free to contact Ms. Myra for a quotation,(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).You will get superior service,and Shandong Leader Machinery Co.,Ltd. produce 2.5T/H CPO Price palm oil mill in Malysia with high quality, high performance and the best prices.
Continuous Refining Decoloring Process
The main function of decoloring process is to remove oil pigment, residual soap grain and metal ions. Under negative pressure, the mechanical mixing method combined with steam mixing will improve the decoloring effect.
The degummed oil firstly enters into the heater to be heated to the appropriate temperature (110°C), and then goes to the bleaching earth mixing tank. The bleaching earth is delivered from the low bleaching box to the temporary tank by wind. The bleaching earth is added by automatic metering and is interlockingly controlled with the oil.
The oil mixed with the bleaching earth overflows into the continuous decolorizer, which is stirred by non-powered steam. The decolored oil enters into the two alternate leaf filters to be filtered. Then the filtered oil enters the decolored oil storage tank through the security filter. The decolored oil storage tank is designed as the vacuum tank with the nozzle inside, so as to prevent the decolored oil contacting with the air and influencing its peroxide value and color reversion.
CPO Price palm oil mill in Malysia
Palm Fruit structure:
Palm oil mill process:
Sterilization: Use the high temperature to boil the bunch and sterilize(145°C,90-120min).
Threshing: eparate the fruit from the bunch through strong vibrating.
Digesting: Stirring the fruit,then digest again.
Pressing: Separate the flesh and kernel, get crude palm oil and kernel(no crack-send to the depericarper).
Clarification: Separate the oil and sludge(get 90% pure oil),the oil contains 45%-55% moisture,sludge and other wastes.
Purification: Oil purifying treatment-increase the purity.
Drying: Use the Continuous Vaccum Drier pumps the moisture from the oil,then the moisture decrease to 0.1%.
Plam oil mill processing paramter:
Capacity : |
2.5 TPH |
Oil extraction rates : |
22~23% |
Oil content in FFB : |
â¥24% |
Kernel content in FFB: |
4% |
Shell content in FFB : |
â¥6~7% |
Fiber content in FFB : |
12~15% |
Empty bunch content in FFB: |
23% |
Press cake proportion in FFB: |
24 % |
Oil content in empty bunch: |
5 % |
Moisture in empty bunch : |
63 % |
Solid phase in empty bunch: |
32% |
Oil content in press cake: |
6 % |
Water content in press cake : |
40 % |
Solid phase in press cake : |
54 % |
Oil content in nut: |
0.08% |
Oil content in wet meter heavy phase |
1% |
Oil content on meter solid: |
3.5% |
Oil content in final effluent: |
0.6% |
Fruit in empty bunch: |
0.05% |
Water in palm kernel |
â¤7% |
Kernel in empty bunches: |
0.05% |
Kernel content in cyclone fiber: |
0.15% |
Kernel content in LTDS: |
0.15% |
Kernel content in dry shell: |
2% |
Kernel content in wet shell: |
2.5% |
|
|
Reception station
Palm oil plant sterilizing station.
Thresher
Pressing station
Screening filter: Remove the impurity in the oil 
Decanter Centrifuge
Our Services
We have cooperate with Sinar Mas Group With 40T/H And 80T/H palm fruit oil mill.
Company Information
We were build in 1982,and university-cooperation enterprise,we have exported more than 30 countries,and our machine adapt to soybean,sunflower,cottonseed,palm kernel and peanut and all kinds of vegetable oil mateirals.Welcome your joining!
Our customers from all over the world
Made in China palm oil processing equipment
If you have any needs,please contact me!
Shandong Leader Machinery Co.,Ltd. is one of the leading Manufacturers and Suppliers of 2.5T/H CPO Price palm oil mill in Malysia.Shandong Leader Machinery Co.,Ltd. manufacture 2.5T/H CPO Price palm oil mill in Malysia making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Auxiliary Machine For Oil Press for you reference,such as 2.5T/H CPO Price palm oil mill in Malysia ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Auxiliary Machine For Oil Press.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for 2.5T/H CPO Price palm oil mill in Malysia, inform us raw material you want to use for 2.5T/H CPO Price palm oil mill in Malysia,and specific requirements for 2.5T/H CPO Price palm oil mill in Malysia.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Auxiliary Machine For Oil Press.