20-500TPD rice bran oil factory

Application of Auxiliary Machine For Oil Press:
peanut kernel, sesame seeds, soybean,(almond)Apricot kernel, pumpkin seed kernel,
Sunflower kernel,Camellia seed kernel,rapeseed, flaxseed,Fire hemp seed,pinenut kernel. etc.
Features of Auxiliary Machine For Oil Press:
1.Screw Oil Press/Cold Oil
2.Household Equipment
3.Stainless Steel Material
4.Lower Price

Hydration Deguming & Alkali Refining Deacidification Process
Neutralization: the crude oil is output by the oil feed pump from the oil tank, and next enters the crude oil heat exchanger to recover part of heat after metering and then is heated to the required temperature by the heater. After that, the oil is mixed with the metered phosphoric acid or citric acid from phosphate tank in the gas mixture (M401), and then enters the conditioning tank (R401) to make the non-hydratable phospholipids in oil change into the hydratable phospholipids. Add the alkali for neutralization, and the alkali quantity and alkali solution concentration depend on the quality of the crude oil. Through the heater, the neutralized oil is heated to the temperature (90°C) suitable for centrifugal separation to remove the phospholipids, Auxiliary Machine For Oil PressA and other impurities in the crude oil. Then the oil goes to the washing process.

Washing: there is still about 500ppm soap in the neutralized oil from the separator. To remove the remaining soap, add into the oil about 5~8% hot water, with water temperature 3~5 °C higher than the oil generally. To achieve more stable washing effect, add phosphoric acid or citric acid when washing. The re-mixed oil and water in the mixer is heated to 90-95°C by the heater, and then enters the wash separator to separate the remaining soap and most water. The water with soap and oil enters into oil separator to separate out oil in the water. Further catch the oil outside, and the waste water is discharged to the sewage treatment station.
Vacuum drying stage: there is still moisture in the oil from the wash separator, and the moisture will affect the stability of the oil. So the oil at 90°C should be sent to vacuum drier to remove the moisture, and then the dehydrated oil goes to the decoloring process. Finally, pump out the dry oil by canned pump.If you are interested in our company,please feel free to contact Ms. Myra for a quotation,(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).You will get superior service,and Shandong Leader Machinery Co.,Ltd. produce 20-500TPD rice bran oil factory with high quality, high performance and the best prices.

Continuous Refining Decoloring Process
The main function of decoloring process is to remove oil pigment, residual soap grain and metal ions. Under negative pressure, the mechanical mixing method combined with steam mixing will improve the decoloring effect.
The degummed oil firstly enters into the heater to be heated to the appropriate temperature (110°C), and then goes to the bleaching earth mixing tank. The bleaching earth is delivered from the low bleaching box to the temporary tank by wind. The bleaching earth is added by automatic metering and is interlockingly controlled with the oil.
The oil mixed with the bleaching earth overflows into the continuous decolorizer, which is stirred by non-powered steam. The decolored oil enters into the two alternate leaf filters to be filtered. Then the filtered oil enters the decolored oil storage tank through the security filter. The decolored oil storage tank is designed as the vacuum tank with the nozzle inside, so as to prevent the decolored oil contacting with the air and influencing its peroxide value and color reversion.

Specifications

20-500TPD rice bran oil factory

Cathy wu

Mobile : 15938721580

Skype : cathy.wu666

Alibaba: cn1500376114

Simple Craft Flow Chart

Pretreatment and Press process:

Cleaning and separating----steaming----cooking----pressing----filter----crude oil

Each step purpose:

A, Cleaning and separating: Remove the broken rice and other impurities, that can guarantee the oil yield

B, Steaming: In order to soften the crude fibre and conglomerate the protein,break the cell wall,small oil drip can gather into the big oil drip, so that the oi can be easily out.

Condition: rotate speed: 40 temperature:80~100°C time:10min moisture:25~30%

C, Cooking: lower the moisture in the rice bran, so that oil can be easily out,

Condition: stir constantly.temperature:125°C,time:20~30min,moisture lower to:5~7%.

D, Press condition: temperature:80~90°Ctime:3~5min

E, Filter condition: temperature: 70°C

Refining process:

Crude oil----degumming----deacidification----decoloring----filter----deodorizing----fourth grade oil

Crude oil----degumming----deacidification----decoloring----filter----deodorizing----dewaxing----degrease----first grade oil

Four grades oil in China Standard

Introduction of Rice Oil Making Craft in Detail

Cleaning and Separating:

This process mainly to remove the impurities like iron,sand,broken rice and others. If the impurities exist in the rice bran, it will affect the machines operation. And make the crude oil impure,then largely affect the refining process.

The cleaning method mainly includes screen and magnetic separation.

Steaming:

This process namely soften the rice bran,making the bran cooked.as the rice bran is low oil content and low moisture content, so it has to through steaming to adjust its moisture and temperature to a suitable level, that can increase the rice bran elastic-plastic. break the cell wall and oil easily out when pressing.

Cooking:

This process has the same purpose with steaming, aiming to make the oil out easily, the difference is just lower the moisture to 5~7%,to much water content will affect the oil outing.

Pressing:

This is the oil out process, the cooked rice bran will be sent to screw oil press machine through the screw conveyor. After pressing, we can get the crude rice bran oil.

Filter:

Filter the crude oil with canvas or double layer cloth in the Plate-fram filter, control the temperature to 70°C,then the crude oil will be sent to the refining process.

rice bran oil factory Plant:

Phosphoric acid alkali clay vacuum

↓ ↓ ↓ ↓

Crude oil---- degumming ----deacidification ----decoloring ----deodorizing ----fourth grade oil

↓ ↓ ↓ ↓

Oil sediment soapstock Clay residue waste gas

Introduction of the whole process:

A,First send the crude oil into the mix reactor with certain quantity water and acid, after well blended send into the centrifugal separator and then separate the oil sediment.

B,Second send into another mix reactor, adding certain concentration alkali and well neutralization reaction. Separate the soapstock through the centrifugal separator.

C,Now wash the crude oil with light alkali and water, washing out the residual soapstock.

D,Third send the oil into the bleaching tower,well blended with certain quantity clay, under the certain temperature,time,vacuum condition, the clay absorb the colorful substance and other impurities. Then separating the waste clay through the centrifugal separator.

E,At last send the oil into deodorization tower,under the certain temperature and vacuum condition, deodorizing the oil through steam stripping. Then get the fourth grade oil.

Our machines advantages:

1,some of our technology adopts Germany standard, and some equipment parts are imported.

2,our stainless steel and carbon steel are all purchased directly from the steel factory.our professional engineer will detect every time.so we can guarantee the quality.

3,all of our welding technicians have the employment certificates.they are good at it.

4,we provide installation and professional training.

5,we supply the best service to our customer,if there is any technology problem,we will transfer it to our customer.

Professional suggestion:

Kindly please inform us your required daily capacity, quantity, raw material, covering space and related data,

so that we can provide you professional equipment information and design proper oil production line for you. we will suggest economical and reasonable production line for you.

Shandong Leader Machinery Co.,Ltd. is one of the leading Manufacturers and Suppliers of 20-500TPD rice bran oil factory.Shandong Leader Machinery Co.,Ltd. manufacture 20-500TPD rice bran oil factory making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Auxiliary Machine For Oil Press for you reference,such as 20-500TPD rice bran oil factory ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Auxiliary Machine For Oil Press.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for 20-500TPD rice bran oil factory, inform us raw material you want to use for 20-500TPD rice bran oil factory,and specific requirements for 20-500TPD rice bran oil factory.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Auxiliary Machine For Oil Press.