Peanut oil making machine

Application of Auxiliary Machine For Oil Press:
peanut kernel, sesame seeds, soybean,(almond)Apricot kernel, pumpkin seed kernel,
Sunflower kernel,Camellia seed kernel,rapeseed, flaxseed,Fire hemp seed,pinenut kernel. etc.
Features of Auxiliary Machine For Oil Press:
1.Screw Oil Press/Cold Oil
2.Household Equipment
3.Stainless Steel Material
4.Lower Price

Hydration Deguming & Alkali Refining Deacidification Process
Neutralization: the crude oil is output by the oil feed pump from the oil tank, and next enters the crude oil heat exchanger to recover part of heat after metering and then is heated to the required temperature by the heater. After that, the oil is mixed with the metered phosphoric acid or citric acid from phosphate tank in the gas mixture (M401), and then enters the conditioning tank (R401) to make the non-hydratable phospholipids in oil change into the hydratable phospholipids. Add the alkali for neutralization, and the alkali quantity and alkali solution concentration depend on the quality of the crude oil. Through the heater, the neutralized oil is heated to the temperature (90°C) suitable for centrifugal separation to remove the phospholipids, Auxiliary Machine For Oil PressA and other impurities in the crude oil. Then the oil goes to the washing process.

Washing: there is still about 500ppm soap in the neutralized oil from the separator. To remove the remaining soap, add into the oil about 5~8% hot water, with water temperature 3~5 °C higher than the oil generally. To achieve more stable washing effect, add phosphoric acid or citric acid when washing. The re-mixed oil and water in the mixer is heated to 90-95°C by the heater, and then enters the wash separator to separate the remaining soap and most water. The water with soap and oil enters into oil separator to separate out oil in the water. Further catch the oil outside, and the waste water is discharged to the sewage treatment station.
Vacuum drying stage: there is still moisture in the oil from the wash separator, and the moisture will affect the stability of the oil. So the oil at 90°C should be sent to vacuum drier to remove the moisture, and then the dehydrated oil goes to the decoloring process. Finally, pump out the dry oil by canned pump.If you are interested in our company,please feel free to contact Ms. Myra for a quotation,(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).You will get superior service,and Shandong Leader Machinery Co.,Ltd. produce Peanut oil making machine with high quality, high performance and the best prices.

Continuous Refining Decoloring Process
The main function of decoloring process is to remove oil pigment, residual soap grain and metal ions. Under negative pressure, the mechanical mixing method combined with steam mixing will improve the decoloring effect.
The degummed oil firstly enters into the heater to be heated to the appropriate temperature (110°C), and then goes to the bleaching earth mixing tank. The bleaching earth is delivered from the low bleaching box to the temporary tank by wind. The bleaching earth is added by automatic metering and is interlockingly controlled with the oil.
The oil mixed with the bleaching earth overflows into the continuous decolorizer, which is stirred by non-powered steam. The decolored oil enters into the two alternate leaf filters to be filtered. Then the filtered oil enters the decolored oil storage tank through the security filter. The decolored oil storage tank is designed as the vacuum tank with the nozzle inside, so as to prevent the decolored oil contacting with the air and influencing its peroxide value and color reversion.

Specifications

Peanut oil making machine

Groundnut→Cleaning→ Hulling→ Separate Shell and Kernel→ Soften→Flaking→Cooking→Pressing

→Crude Oil

Peanut oil making machine as follows:

The main process of Peanut oil making machine :

1.Cleaning

In order to obtain high effective cleaning, ensure good work condition and production stability, high efficient

vibration screen was used in the process to separate big and small impurity. Suction type gravity stoner removing

machine was applied to remove the shoulder stone and earth, and magnetic separation equipment without power

and exhaust system were used to remove iron. Dust removing wind net is installed.

destone

2.Dehulling

Put the raw material into the two discs.The relative movement between the two discs,the insection on the disc

surface make kneading function of the material hull,then make the hull fall down.Separate the shell and kernel.

3.Softening

Adjusting the moisture and temperature , so that increase the oilseed plasticity,reduce powder when flaking and

sticky roller, in order to ensure the quality of the flakes. conditioning can also reduce the vibration of the machine

when flaking roll wear, in order to facilitate the flaking operate normally.

4.Flaking

Flaking means a certainty granularity of soy lamella was prepared for flaked of about 0.3 mm, the oil of raw material

can be extracted in the shortest time and maximum, and residual oil was less than 1%. the thickness is uniform,

moderate size, no out oil,less powder,and with a certain degree of mechanical strength.The fuel cell wall damaged,

then shorten the oil discharged from the oil seed away.

5.Cooking

Put the material into the toaster,the mixing blade is with continuous turning driven by the reducer.

The toaster is with interlayer design, heating media is hot conducting oil or steam, thus keep

the flaking temperature stable.

6.Pressing This is the oil out process, the soybean flake will be sent to oil press machine through the screw conveyor.

After pressing, we can get the crude cottoen oil.

Peanut oil making machine advantages

1. High oil yielding, low oil residual in the cake:The oil left in cake is less than 6%. The cake thickness can be adjusted once the machine stops running;

2. Compact size: only 10-20m2 is enough.

3. High purity: machine surface is made of chrome plated stainless steel, in line with food hygiene standards.

4. Easy operation. You should operate as per the instruction.

5. Components:Screw pressing part, Electrical controlling system, automatic heater, adjusting mechanism, driving unit and vacuum oil filter etc.

6. Multifunctional:used for pressing soybean, sunflower seeds, peanut, sesame, rapeseeds, flax seed, camellia, cotton seed, cashew, hemp seed, linseeds, coconut(copra), palm, palm kernel, pumpkin seeds, and walnuts and all the oil crops.

7.Convenient and safe: concise structure, small occupation area, it use the fully enclosed protection,convenient and safe operation

.

We have the good service and customers:

Our market

Welcome to visit our web:

http://goldpenguin.en.alibaba.com/

Shandong Leader Machinery Co.,Ltd. is one of the leading Manufacturers and Suppliers of Peanut oil making machine.Shandong Leader Machinery Co.,Ltd. manufacture Peanut oil making machine making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Auxiliary Machine For Oil Press for you reference,such as Peanut oil making machine ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Auxiliary Machine For Oil Press.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for Peanut oil making machine, inform us raw material you want to use for Peanut oil making machine,and specific requirements for Peanut oil making machine.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Auxiliary Machine For Oil Press.