Scientific equipment of soy oil press machine with ISO

Application of Auxiliary Machine For Oil Press:
peanut kernel, sesame seeds, soybean,(almond)Apricot kernel, pumpkin seed kernel,
Sunflower kernel,Camellia seed kernel,rapeseed, flaxseed,Fire hemp seed,pinenut kernel. etc.
Features of Auxiliary Machine For Oil Press:
1.Screw Oil Press/Cold Oil
2.Household Equipment
3.Stainless Steel Material
4.Lower Price

Hydration Deguming & Alkali Refining Deacidification Process
Neutralization: the crude oil is output by the oil feed pump from the oil tank, and next enters the crude oil heat exchanger to recover part of heat after metering and then is heated to the required temperature by the heater. After that, the oil is mixed with the metered phosphoric acid or citric acid from phosphate tank in the gas mixture (M401), and then enters the conditioning tank (R401) to make the non-hydratable phospholipids in oil change into the hydratable phospholipids. Add the alkali for neutralization, and the alkali quantity and alkali solution concentration depend on the quality of the crude oil. Through the heater, the neutralized oil is heated to the temperature (90°C) suitable for centrifugal separation to remove the phospholipids, Auxiliary Machine For Oil PressA and other impurities in the crude oil. Then the oil goes to the washing process.

Washing: there is still about 500ppm soap in the neutralized oil from the separator. To remove the remaining soap, add into the oil about 5~8% hot water, with water temperature 3~5 °C higher than the oil generally. To achieve more stable washing effect, add phosphoric acid or citric acid when washing. The re-mixed oil and water in the mixer is heated to 90-95°C by the heater, and then enters the wash separator to separate the remaining soap and most water. The water with soap and oil enters into oil separator to separate out oil in the water. Further catch the oil outside, and the waste water is discharged to the sewage treatment station.
Vacuum drying stage: there is still moisture in the oil from the wash separator, and the moisture will affect the stability of the oil. So the oil at 90°C should be sent to vacuum drier to remove the moisture, and then the dehydrated oil goes to the decoloring process. Finally, pump out the dry oil by canned pump.If you are interested in our company,please feel free to contact Ms. Myra for a quotation,(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).You will get superior service,and Shandong Leader Machinery Co.,Ltd. produce Scientific equipment of soy oil press machine with ISO with high quality, high performance and the best prices.

Continuous Refining Decoloring Process
The main function of decoloring process is to remove oil pigment, residual soap grain and metal ions. Under negative pressure, the mechanical mixing method combined with steam mixing will improve the decoloring effect.
The degummed oil firstly enters into the heater to be heated to the appropriate temperature (110°C), and then goes to the bleaching earth mixing tank. The bleaching earth is delivered from the low bleaching box to the temporary tank by wind. The bleaching earth is added by automatic metering and is interlockingly controlled with the oil.
The oil mixed with the bleaching earth overflows into the continuous decolorizer, which is stirred by non-powered steam. The decolored oil enters into the two alternate leaf filters to be filtered. Then the filtered oil enters the decolored oil storage tank through the security filter. The decolored oil storage tank is designed as the vacuum tank with the nozzle inside, so as to prevent the decolored oil contacting with the air and influencing its peroxide value and color reversion.

Specifications

Scientific equipment of soy oil press machine with ISO

WIDELY APPLIED OILSEEDS:

PARAMETERS OF OILSEEDS:

FLOWCHRT OF THE WHOLE OIL MILL PROCESSING:

INTRODUCTION OF OILSEED PROCESSING PLANT:

These oil mill can process a number of oilseeds like peanut, soya, cotton seeds sunflower seeds, corn germ, rape seeds, canola, castor, sesame, neem seed, sheanut, palm kernel and the like.

The most important equipment in the entire milling / pressing process is oil expellers which are used for high oil content seeds and also used for smaller capacity oil production plant.

In former times, oil extraction was done exclusively with presses. In most oil milling plant, oil extraction is done with expellers as pre extraction before solvent extraction or as direct press extraction.

OIL PRESSING:

Mechanical oil pressing is to extract the oil by certain oil pressing machine from the oil material by physics pressure, all the courses are without any chemical additive. The typical oil pressing method usually include the following two kinds, cold pressing and hot pressing.

FLOWCHART OF PRESSING:

ADVANTAGES OF MECHANICAL PRESSING:

1. The speed reducer saves the energy of the equipments

2. The speed reducer make the equipments energy saved;

3. The special design of the expellers are with lower residual oil left in cake and make higher oil output;

4. The quality of oil cake from pressing is higher, more suits for downstream processing.

5. Versatile to process many kinds of oil seeds, such as peanut kernels, rapeseeds, cotton seeds, sunflower seeds, corn germ, palm kernel, sesame, etc.

OUR CERTIFICATES:

Shandong Leader Machinery Co.,Ltd. is one of the leading Manufacturers and Suppliers of Scientific equipment of soy oil press machine with ISO.Shandong Leader Machinery Co.,Ltd. manufacture Scientific equipment of soy oil press machine with ISO making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Auxiliary Machine For Oil Press for you reference,such as Scientific equipment of soy oil press machine with ISO ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Auxiliary Machine For Oil Press.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for Scientific equipment of soy oil press machine with ISO, inform us raw material you want to use for Scientific equipment of soy oil press machine with ISO,and specific requirements for Scientific equipment of soy oil press machine with ISO.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Auxiliary Machine For Oil Press.