Product Details

Corn Germ Oil Production Line

Place of Origin Jinan, China (Mainland)
Brand Name Auxiliary Machine For Oil Press
Certification ISO9001:2008,CE
Min.Order Quantity 1 Set/Sets Corn Germ Oil Production Line
Price US $2,000 - 80,000/ Set
Payment Terms paypal,UnionPay, Visa/MasterCard, Amex, Discover,T/T
Supply Ability 30 Set/Sets per Month Corn Germ Oil Production Line

Product Features

Application of Auxiliary Machine For Oil Press:
peanut kernel, sesame seeds, soybean,(almond)Apricot kernel, pumpkin seed kernel,
Sunflower kernel,Camellia seed kernel,rapeseed, flaxseed,Fire hemp seed,pinenut kernel. etc.
Features of Auxiliary Machine For Oil Press:
1.Screw Oil Press/Cold Oil
2.Household Equipment
3.Stainless Steel Material
4.Lower Price

Hydration Deguming & Alkali Refining Deacidification Process
Neutralization: the crude oil is output by the oil feed pump from the oil tank, and next enters the crude oil heat exchanger to recover part of heat after metering and then is heated to the required temperature by the heater. After that, the oil is mixed with the metered phosphoric acid or citric acid from phosphate tank in the gas mixture (M401), and then enters the conditioning tank (R401) to make the non-hydratable phospholipids in oil change into the hydratable phospholipids. Add the alkali for neutralization, and the alkali quantity and alkali solution concentration depend on the quality of the crude oil. Through the heater, the neutralized oil is heated to the temperature (90°C) suitable for centrifugal separation to remove the phospholipids, Auxiliary Machine For Oil PressA and other impurities in the crude oil. Then the oil goes to the washing process.

Washing: there is still about 500ppm soap in the neutralized oil from the separator. To remove the remaining soap, add into the oil about 5~8% hot water, with water temperature 3~5 °C higher than the oil generally. To achieve more stable washing effect, add phosphoric acid or citric acid when washing. The re-mixed oil and water in the mixer is heated to 90-95°C by the heater, and then enters the wash separator to separate the remaining soap and most water. The water with soap and oil enters into oil separator to separate out oil in the water. Further catch the oil outside, and the waste water is discharged to the sewage treatment station.
Vacuum drying stage: there is still moisture in the oil from the wash separator, and the moisture will affect the stability of the oil. So the oil at 90°C should be sent to vacuum drier to remove the moisture, and then the dehydrated oil goes to the decoloring process. Finally, pump out the dry oil by canned pump.If you are interested in our company,please feel free to contact Ms. Myra for a quotation,(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).You will get superior service,and Shandong Leader Machinery Co.,Ltd. produce Corn Germ Oil Production Line with high quality, high performance and the best prices.


Continuous Refining Decoloring Process
The main function of decoloring process is to remove oil pigment, residual soap grain and metal ions. Under negative pressure, the mechanical mixing method combined with steam mixing will improve the decoloring effect.
The degummed oil firstly enters into the heater to be heated to the appropriate temperature (110°C), and then goes to the bleaching earth mixing tank. The bleaching earth is delivered from the low bleaching box to the temporary tank by wind. The bleaching earth is added by automatic metering and is interlockingly controlled with the oil.
The oil mixed with the bleaching earth overflows into the continuous decolorizer, which is stirred by non-powered steam. The decolored oil enters into the two alternate leaf filters to be filtered. Then the filtered oil enters the decolored oil storage tank through the security filter. The decolored oil storage tank is designed as the vacuum tank with the nozzle inside, so as to prevent the decolored oil contacting with the air and influencing its peroxide value and color reversion.

Specifications

Oil Production Line
1.RBD Oil;
2.5-1000TPD Process Capacity;
3.High Quality;
4.Easy Operation

Corn Germ Oil Production Line

Craft flow for corn oil extraction workshop of Corn Germ Oil Production Line

solvent steam

↓ ↓

extraction → mixed oil → evaporation→ steam-stripping → crude oil

1. Introduction: corn oil extraction process

(1) Function: Leaching system is an oil extraction through soaking or spraying pre-pressed cake by a certain organic solvent. The principle of this part is the different solubility of solvent.

(2) Use range: Solvent extraction fits for pre-press extraction of high-oil-content materials and direct once time extraction of low-oil-content materials. Our machine is suitable to various raw materical,such as sunflower seed cake, tea seed cake, groundnut cake, cottonseed cake, palm cake, rice bran cake, soybean cake, corn and palm cake, rapeseed cake, etc.

(3) Main parts: The extraction series includes rotary extractor, toaster, 1st evaporator, 2nd evaporator, stripping tower, condenser, etc.

2.Professional Advice

Please kindly inform us your required daily capacity, treated quantity, raw material, covering space and related data,so that we can make flow chart production line for you as your requirement. we will stand at your point to suggest low cost and suitable production line for you. Sincerely want to cooperate with you.

Besides extraction equipment, our company also provide high quality prepressing equipment and fefining equipment with which you can prepress the raw material and refine the crude oil for different standards.

Main economic and technical parameters of Corn Germ Oil Production Line:

Residual oil in meal

≤1% (soybean)

Solvent consumption

≤3Kg/T(6#solvent oil)

Crude oil moisture and volatile matter

≤ 0.30%

Power consumption

≤ 15KWh/T

Steam consumption

≤280Kg/T (0.8MPa)

Finished meal moisture

≤ 10-13% (adjustable)

Residual solvent in finished meal

≤ 300PPM (qualified detonated experiment)

Shandong Leader Machinery Co.,Ltd. is one of the leading Manufacturers and Suppliers of Corn Germ Oil Production Line.Shandong Leader Machinery Co.,Ltd. manufacture Corn Germ Oil Production Line making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Auxiliary Machine For Oil Press for you reference,such as Corn Germ Oil Production Line ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Auxiliary Machine For Oil Press.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for Corn Germ Oil Production Line, inform us raw material you want to use for Corn Germ Oil Production Line,and specific requirements for Corn Germ Oil Production Line.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Auxiliary Machine For Oil Press.

All Products Contact Now