Widely-used soybean oil making machine from manufacturer

Application of Auxiliary Machine For Oil Press:
peanut kernel, sesame seeds, soybean,(almond)Apricot kernel, pumpkin seed kernel,
Sunflower kernel,Camellia seed kernel,rapeseed, flaxseed,Fire hemp seed,pinenut kernel. etc.
Features of Auxiliary Machine For Oil Press:
1.Screw Oil Press/Cold Oil
2.Household Equipment
3.Stainless Steel Material
4.Lower Price

Hydration Deguming & Alkali Refining Deacidification Process
Neutralization: the crude oil is output by the oil feed pump from the oil tank, and next enters the crude oil heat exchanger to recover part of heat after metering and then is heated to the required temperature by the heater. After that, the oil is mixed with the metered phosphoric acid or citric acid from phosphate tank in the gas mixture (M401), and then enters the conditioning tank (R401) to make the non-hydratable phospholipids in oil change into the hydratable phospholipids. Add the alkali for neutralization, and the alkali quantity and alkali solution concentration depend on the quality of the crude oil. Through the heater, the neutralized oil is heated to the temperature (90°C) suitable for centrifugal separation to remove the phospholipids, Auxiliary Machine For Oil PressA and other impurities in the crude oil. Then the oil goes to the washing process.

Washing: there is still about 500ppm soap in the neutralized oil from the separator. To remove the remaining soap, add into the oil about 5~8% hot water, with water temperature 3~5 °C higher than the oil generally. To achieve more stable washing effect, add phosphoric acid or citric acid when washing. The re-mixed oil and water in the mixer is heated to 90-95°C by the heater, and then enters the wash separator to separate the remaining soap and most water. The water with soap and oil enters into oil separator to separate out oil in the water. Further catch the oil outside, and the waste water is discharged to the sewage treatment station.
Vacuum drying stage: there is still moisture in the oil from the wash separator, and the moisture will affect the stability of the oil. So the oil at 90°C should be sent to vacuum drier to remove the moisture, and then the dehydrated oil goes to the decoloring process. Finally, pump out the dry oil by canned pump.If you are interested in our company,please feel free to contact Ms. Myra for a quotation,(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).You will get superior service,and Shandong Leader Machinery Co.,Ltd. produce Widely-used soybean oil making machine from manufacturer with high quality, high performance and the best prices.

Continuous Refining Decoloring Process
The main function of decoloring process is to remove oil pigment, residual soap grain and metal ions. Under negative pressure, the mechanical mixing method combined with steam mixing will improve the decoloring effect.
The degummed oil firstly enters into the heater to be heated to the appropriate temperature (110°C), and then goes to the bleaching earth mixing tank. The bleaching earth is delivered from the low bleaching box to the temporary tank by wind. The bleaching earth is added by automatic metering and is interlockingly controlled with the oil.
The oil mixed with the bleaching earth overflows into the continuous decolorizer, which is stirred by non-powered steam. The decolored oil enters into the two alternate leaf filters to be filtered. Then the filtered oil enters the decolored oil storage tank through the security filter. The decolored oil storage tank is designed as the vacuum tank with the nozzle inside, so as to prevent the decolored oil contacting with the air and influencing its peroxide value and color reversion.

Specifications

Widely-used soybean oil making machine from manufacturer

ABOUT US:

We manufacture unit oil making machine and the complete production line. Our company has been in this line for over 30 years. We have our own research institutes and professional engineer groups.

Machines in Indonesia

OUR MAIN BUSINESS FIELD:

10-500T/H oil material first cleaning,drying and storage section turn-key project;

100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot peeling, bean skin crushing; the soybean extrusion, high oil contained pre-press cake extrusion, and high oil contained embryos puffed; of direct puffed). Rice bran production line turn-key project;

100~300TPD Leaching workshop turnkey project (Towline extractor, Rotocel extractor, loop type extractor, DTDC separated machine, the full negative pressure evaporation, paraffin wax recovery, leaching workshop degum, phospholipid concentrate);

30-1000T/D oil continuous grade one or two physical (chemical) refining productionline;

20-3000T/D sunflower oil, rice bran oil, corn germ oil dewaxing turn-key project;

10-200T/D Fatty acid esterification production cooking oil production line.

SOYBEAN PRETREATMENT FLOWCHART:

Soyabean→Magnetic separation→Cleaning→crusher→flaker→ Extrusion Puffing →Counter-current drying→To leaching plant

INTRODUCTION OF PRETREATMENT:

1. Magnetic box and cleaning screen

To move the impurities in the raw materials. This can help to protect the following machines.

2. Crushing

Crushing is necessary for soya oil making, because the volume of soya is a little big. In order to improve the oil yield rate and protect the following machines, we need to crush big seeds to small parts. If the raw material is small, we won't need the crushing.

3. Softening

This is the special step for soya oil making. Soya is becoming soft after this step, so it is easier to flake cake and press.

4. Flaking roller

To make the groundnut into pieces with the thickness from 0.25-0.3 mm. This can help the groundnut heating well-proportioned and soaking well in the extraction section.

5. Dryer and cooker

Before the raw materials entering the extraction section, we need to adjust the water rate by

dryer. In this process, the water and temperature help to get crude oil easily and improve the

quality of cake and oil. After the dryer and cooker under 105-110 °C, the water content is 5-8%.

6. Pressing or pre-pressing

If the capacity is small and without extraction section, usually we will use pressing to get crude soybean oil. Usually soya oil making will not use press, because the oil rate is low of soya. After cooker, soybean will direct to extraction and get crude soybean oil.

Machines from Shandong LD Grain & Oil Machinery Co,.Ltd have been widely- exported to more than 30 countries, like Russia, India, South Africa, Thai, Nepal, Indonesia and so on.

Shandong Leader Machinery Co.,Ltd. is one of the leading Manufacturers and Suppliers of Widely-used soybean oil making machine from manufacturer.Shandong Leader Machinery Co.,Ltd. manufacture Widely-used soybean oil making machine from manufacturer making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Auxiliary Machine For Oil Press for you reference,such as Widely-used soybean oil making machine from manufacturer ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Auxiliary Machine For Oil Press.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for Widely-used soybean oil making machine from manufacturer, inform us raw material you want to use for Widely-used soybean oil making machine from manufacturer,and specific requirements for Widely-used soybean oil making machine from manufacturer.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Auxiliary Machine For Oil Press.