LD'e advanced solvent oil extraction machine, seed cake oil extraction mill, soybean oil extraction machine
MAIN PROCESS OF SOLVENT EXTRACTION:
WHAT ARE THE SOLVENT EXTRACTION MACHINES LIKE?
FEATURES OF LD'E ROTOCEL EXTRACTOR:
a) Adopt stainless steel fixed grid plate and increase the horizontal grid plates, which can prevent the strong miscella from flowing back to the blanking case, so as to ensure good extraction effect;
b) The rotocel extractor is driven by rack, with unique rotor of balanced design, low rotating speed, low power, smooth operation, no noise and quite low maintenance cost;
c) The feeding system can adjust the rotating speed of airlock and main engine according to the feeding quantity and maintain a certain material level, which is beneficial to the micro negative pressure inside the extractor and reduce the solvent leakage.
d) The advanced miscella circulation process is designed to reduce the fresh solvent inputs, reduce the residual oil in meal, improve the miscella concentration and save energy by reducing the evaporation capacity.
e) The high material layer of the extractor helps to form immersion extraction, reduce the meal quality in miscella, improve the quality of crude oil and reduce the evaporation system scaling.
f) Specially suitable for the extraction of various pre-pressed meals.
DTDC TOASTING PROCESS:
LD'e company adopts the new high efficiency DTDC series desolventizer toaster.
Desolventizer toaster is the key equipment for wet meal desolventizing and passivation of anti-nutritional factors in the meal. which sets desolventizing, drying and cooling in one, with simple operation, stable product quality
MISCELLA EVAPORATION PROCESS:
The liquid from the extractor is the miscella containing grease and oil, which can be separated out according their different vaporization temperatures. Our company mainly uses vacuum evaporation technology, and it can reduce solvent leakage and consumption. The separated solvent vapour is cooled and recycled back to the extractor for reuse, which can improve the solvent efficiency
SOLVENT CONDENSATION & RECOVERY PROCESS:
Solvent condensation system combines with evaporation system closely, and evaporative condenser and steam stripping condenser all work under negative pressure. Non-condensable gas enters the energy saver from the shell of the first evaporator. In energy saver, non-condensable gas exchanges heat with condensate from the evaporative condenser. Finally,
the condensate temperature discharged from energy saver is increased, and the solvent separated from water goes to solvent holding tank. The high temperature makes it unnecessary to be reheated for the recycling, so as to save energy.
PARAFFIN OIL RECOVERY PROCESS:
Tail gas first enters paraffin absorption tower, and then comes the counter-current absorption
of paraffin and tail gas, which can reach the ideal state when the stainless steel packing has large surface area. The solvent content in discharged liquid paraffin (called rich oil) is not more than 5%, so as to ensure the maximum absorption rate
LD'E SHIPPING:
Still have questions?
What should you do??
Do not worry!
SAM is always here!!
Just Contact SAM!!!