Hazelnut Oil Oil extrude machine for all kinds of edible oil extrude

Specifications

Oil extrude machine for all kinds of edible oil extrude

Our main business:

• 10-500T/H oil material first cleaning,drying and storage section turn-key project.

• 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot peeling, bean skin crushing; the soybean extrusion, high oil contained pre-press cake extrusion, and high oil contained embryos puffed; of direct puffed). Rice bran production line turn-key project.

• Leaching workshop turnkey project (Towline extractor, Rotocel extractor, loop type extractor, DTDC separated machine, the full negative pressure evaporation, paraffin wax recovery, leaching workshop degum, phospholipid concentrate).

• 30-1000T/D oil continuous grade two or one physical (chemical) refining production line.

• 10-600T/D sunflower oil, rice bran oil, corn germ oil dewaxing turn-key project

oil extrude craft:

raw materal→Magnetic separation→Cleaning→crusher→flaker→ Extrusion Puffing →

Counter-current drying→To leaching plant

Cleaning: In order to obtain high effective cleaning, ensure good work condition and production stability, high

efficient vibration screen was used in the process to separate big and small impurity. Suction type gravity stoner

removing machine was applied to remove the shoulder stone and earth, and magnetic separation equipment without

power and exhaust system were used to remove iron. Dust removing wind net is installed.

Crush:In order to ensure good softening and flaking effect, soy is generally broken up uniformly to 5~6 flakes and

water distribute uniformly during softening, and flakes is thin and burliness.

Extrusion process:Adopting the bulking machine can both improve the yield of rice bran oil and

reduce the consumption. The extrusion puffing, on the one hand, can make solution lipase in the

rice bran passivated under high temperature and high pressure condition,then prevent the rice

bran oil rancidity; On the other hand, the extrusion puffing can make rice bran be porousmateial

grain, and increases the materials bulk density, then improve the permeability and leaching rate

which solvent reacts to the material.

Flaking:Flaking means a certainty granularity of soy lamella was prepared or flaked of about

0.3 mm, the oil of raw material can be extracted in the shortest time and maximum, and

residual oil was less than 1%.

Drying process:The puffed rice bran contains about 12% water, and the best moisture for leaching process is7-9%, therefore, there must be effective drying means to achieve the best leaching

moisture.Adopting counter-current dryer can make water and temperature meet with follow-up process requirements, and improvethe oil yield, as well as oil quality.

Kinds of cooking oil oil extration rate:

Cooking oil advanges:

1.Different combinations of process can process various oil plants in one workshop.

2.Use special intensified pretreatment technology for aroma peanut oil to make it more aroma.

3.Adopt advanced and reliable shelling technology to meet higher requirements for protein content in meal.

4.Extrusion treatment is used for raw materials with hard extraction, large-sized powder, and large capacity, which can reduce residual oil and solvent consumption, and increase the capacity

by 50-80%.

5.The new technology of shelling and low-temperature treatment can ensure high protein and least denaturation.

6.short time interval between the machine starting up and the oil coming our,easying operation

If you have any iquired ,please contact me when your free time,

don't hesitate~