Hazelnut Oil Sale to Malysia cooking oil brands of china factory

Specifications

Sale to Malysia cooking oil brands of china factory

Main business:

• 10-500T/H oil material first cleaning,drying and storage section turn-key project.
• 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot peeling, bean skin crushing; the soybean extrusion, high oil contained pre-press cake extrusion, and high oil contained embryos puffed; of direct puffed). Rice bran production line turn-key project.
• Leaching workshop turnkey project (Towline extractor, Rotocel extractor, loop type extractor, DTDC separated machine, the full negative pressure evaporation, paraffin wax recovery, leaching workshop degum, phospholipid concentrate).
• 30-1000T/D oil continuous grade two or one physical (chemical) refining production line.
• 10-600T/D sunflower oil, rice bran oil, corn germ oil dewaxing turn-key project
• 10-200T/D Fatty acid esterification production cooking oil production line.

Cooking oil pre-treatment:

• It is necessary for hulling the corn before pressing, so it could reduce the wax content of final oil, whcih is bad for human.

• Normally the oil pressing plant is composed of seeds cleaning & crushing unit, steaming and drying units, pressing unit, conveyor, electrical cabinet box, etc. The oil pressing unit as the main stage, to make the vegetable seeds flake in a hardened cage to squeeze oil content out. It's complete set of oil pressing equipment, which is automatically operated to save more labor and cost.
• Including to the following machinery and parts:
  Electrical apparatus control, materials feeder, conveyer, screening machine, steaming & frying machine, huller machine, medium boilor etc.
• The by-products from the oil press are cake and soap residue. The cake could be used as animal food with our pelleting machinery, or source material for the other way of extraction. Soap residue is the source material for laundry soap with soap making machinery and washing detergent.
  

Cooking oil extraction workshop craft:

• The second way to extract oil for using chemical solvent to dissolve oil content contained in cake or direct oil seeds, only for lower oil seeds, for example soybean.
• Then oil is separated from solvent by vaporizing solvent out. In configuring the solvent extraction plant, pre-pressing may be involved in which case seeds are lightly pressed, and which leaves about 14% to 18% oil in the pressed cake.
• Solvent extraction will further process these cakes and leave less than 1% oil in the final cake. This method results in higher yields, more oil; Lower power consumption, lower wear & tear / maintenance and high extract efficiency.
• Thus it could be used as complement equipment to extract the oil remained in cake, which yields are extra profits. Certainly if the capacity is less than 50 tons, or it is high rate of output oil, this process could be saved.

Cooking oil refined oil workshop craft:

• The crude vegetable oil from above mentioned two ways of extracting, oil pressing and/or solvent extraction, will be pumped into oil refinery units to produce cooking oil at various grades.
• The main equipment of oil refinery is various kinds of vessels and tanks carrying on different tasks with additives. These tasks may include sedimentation/filtering, neutralization (removing free fatty acid), degumming, decolorization (bleaching), deodorization, especially the dewax process is necessary, more wax would destroy the quality of sunflower oil.
• Different combination of steps and the treating degree of each step result in different grade cooking oil and salad oil.

Cooking oil parameters:

Safety:

1) We use auto welding machine to make the reactor,which can quarrantee the quality of welding

seam,avoid cracking and has a long life for about 8 years.
2) Professional heating treatment and x-ray detection chamber for welding seam .
3) Vacuum system to prevent oil gas be back to reactor causing accident.
4) With professional thermometer , professiona pressure gauge and safety valve.

Environment friendly:

1) Dedusting system to prevent gas and dust from coal burning
2) The exhaust gas will be recycled for heating reactor ,no gas pollution
3) Well sealing on every junction parts to prevent gas leak,no smelly

Longer service life :Using Q345R special steel plate ,welding seam with auto welding an will get

heating treatment and x-ray detection to extend the life of reactor to the most extend, and the life will 8 years.

Energy saving:1) Well sealing for heating system ,no gas leak and saving fuel.
2) The exhaust gas will be recycled for reactor heating.

If you have any iquired ,please contact me when your free time,

always waiting for you.