Fruit and vegetable drying machine is suitable for heating and solidification, and dehydration of raw materials in pharmaceutical industry, chemical industry,foodstuff industry,agricultural products, aquatic products, light industry heavy industry and so on. Such as medicine Drying chamber type heat pump dehumidifier for fruit of raw materials, Shandong Leader Machinery Co.,ltd. Chinese traditional medicine, tablet of drink, powder, granule, packing bottle, pigment, dyestuff, vegetable dehydration, dried fruit and melons, sausage, plastic resin, electric elements, drying varnish and so on. Fruit and vegetable drying machine series hot air circle oven is equipped with low noise axial flow fan and automatic temperature control system. The circle system Drying chamber type heat pump dehumidifier for fruit is fully sealed. Shandong Leader Machinery Co.,ltd. makes the hot efficiency increased from 3-7% of traditional oven to nearly 40%. The Drying chamber type heat pump dehumidifier for fruit maximum hot efficiency can be up to 70%. The successful design of Fruit and vegetable drying machine series hot air circle oven makes the hot air circle oven catch up the advanced level both at home and abroad. Shandong Leader Machinery Co.,ltd. makes country save plenty of energy source and increase profit of enterprises.
Drying chamber type heat pump dehumidifier for fruit
LD Heat Pump Dehumidifier Introduction
LD heat pump dehumidifier operates according to a basic reverse Carnot cycle. The working fluid (refrigerant) at low pressure is vaporized in the evaporator by heat drawn from the dryer exhaust air. The compressor raises the enthalpy of the working fluid of the heat pump and discharges it as superheated vapor at high-pressure. Heat is removed from the working fluid and returned to the process air at the condenser. The working fluid is then throttled to the low-pressure line (using an expansion valve) and enters the evaporator to complete the cycle. In the dryer system, hot and dry air at the exit of condenser is allowed to pass through the drying chamber where it gains latent heat from the material. The humid air at dryer exit then passes through the evaporator where condensation of moisture occurs as the air goes below dew point temperature. Then drain the condenser water.
Model: JK03RD, JK06RD, JK10RD
Power Supply: 220V/1PH/50HZ or 380V/3PH/50HZ
Type: 75% air source + 25% electric power
Max. Temp: 75C
Working Temp: -10~45C
Functions: Heating / Cooling / Dehumidify
Dryer Type: Batch Type
Features
1. Energy saving,Environmental protection,Adopt close dehumidify+circulating drying type,saving operating cost;Without waste gas and waste heat pollution,low noise
2. Running Stable,operating easily,PLC+Touch Screen,running stable,operating easily; Adopt PLC control,can setting different drying curve,Suitable for drying different materials.
3. Second waste heat recovery technology(patent),Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, saving energy more than 40%.
4. Exact control temperature and humidity.According to different material setting different drying curve,the heat pump dryer can control the drying.chamber temperature between 20-80℃
5. Recovery volatilized component Some kinds of material contain volatilized component,In drying processing,hot and wet air will become condenser water then drain,collect the condenser water so that collect volatilized component
Technical Parameters
| Model | JK03RD | JK06RD | JK10RD | |
| Suitable for drying chamber | m3 | 10~20 | 20~30 | 30~40 |
| Power supply | V/PH/HZ | 380/3/50 or 220/1PH/50 | 380/3/50 | 380/3/50 |
| Power input | KW | 2.8 | 5.8 | 10.8 |
| Running current | A | 8/17 | 12.6 | 22.5 |
| Auxiliary electric heater(option) | KW | 9 | 9 | 9 |
| Heating capacity | KW | 12 | 26 | 35 |
| Cooling capacity | KW | 7.5 | 20 | 25 |
| Dehumidification amount | L/H | 8 | 20 | 40 |
| Max. hot air Temperature | ℃ | 75 | 75 | 75 |
| Working ambient temperature | ℃ | -10~45 | -10~45 | -10~45 |
| Refrigerant | Kg | Mixture type/2.5 | Mixture type/4.3 | Mixture type/8.0 |
| Compressor | Type | Scroll | Scroll | Scroll |
| Brand | Copeland/Danfoss | Copeland/Danfoss | Copeland/Danfoss | |
| Quantity | 1 | 1 | 2 | |
| Noise | dB(A) | 60 | 65 | 70 |
| Fan motor for drying | Power input/unit | 250W/unit | 250W/unit | 250W/unit |
| Wind volume | m3/H | m3/H | 2500m3/H/unit | |
| Recommend qty | 8 | 8 | 16units | |
| Heat regenerator size | mm | 500*350*350 | 500*500*580 | 550*600*680 |
| Fan motor for heat regenerator (dehumidify) |
Power input | 200W | 370W | 550W |
| Wind volume | 2000m3/H | 2000m3/H | 3500m3/H | |
| Size(mm) | 450*330*380 | 470*320*470 | 580*320*580 | |
| Wind valve | Power input | 6W | 6W | 6W |
| OPEN | Exchange fresh air | Exchange fresh air | Exchange fresh air | |
| CLOSE | Drying | Drying | Drying | |
| Size(mm) | 480*320*120 | 630*560*120 | 720*640*125 | |
| Fan motor for evaporator (2 units) |
Power input | 250W/unit | 780W/unit | 780W/unit |
| Wind volume | 4600m3/H | 10500m3/H | 2*10500m3/H | |
| Rotate speed | 1350RPM | 1350R/Min | 1350R/Min | |
| Hot air outlet | mm | 600*1100 | 650*1100 | 860*1485 |
| Hot air return inlet | mm | 690*1100 | 750*1100 | 1050*1450 |
| Dimension(L*W*H) | mm | 1650*960*1280 | 1720*1160*1280 | 2100*1460*1590 |
| Net weight | Kg | 210 | 385 | 480 |
| Gross weight | Kg | 240 | 420 | 540 |
Main Components
Product Uses
LD Heat Pump Dehumidifier Application
Can dry all kinds of materials, such as vegetables, fruits, apples, pawpaw, coconut, mango, banana, spice,sea cucumber, seaweeds, beef, jerky, fish, herbs, onions, gingers, chili, pepper, cabbage, carrot, tea leaves etc.
Buying Guides
Recommend Dryer+Drying Chamber Sizes
| 1.Single dryer+drying chamber | ||||
| Product name | Model | Size | Quantity | Remarks |
| Drying machine | JK06RD | 26.0KW | 1 | Stainless steel body for option |
| Drying chamber | S100mm(thickness:100mm) | 6000x2500x2200mm | 1 | |
| Drying chamber material | Polyurethane(Two sides:steel) | Steel sheet(thickness:0.326mm) | / | |
| Door | S100mm(thickness:100mm) | 1000x1800mm | 1 | |
| Partition sheet | Thickness:25mm | 4300x2000mm | 1 | |
| Fan motors | 3# | 250W/unit | 8 | |
| Suitable about 600KG/batch | ||||
| 2. Double dryers+drying chamber | ||||
| Product name | Model | Size | Quantity | Remarks |
| Drying machine | JK06RD | 26.0KW | 2 | Stainless steel body for option |
| Drying chamber | S100mm(thickness:100mm) | 8000x2500x2200mm | 1 | |
| Drying chamber material | Polyurethane(Two sides:steel) | Steel sheet(thickness:0.326mm) | / | |
| Door | S100mm(thickness:100mm) | 1000x1800mm | 4 | |
| Partition sheet | Thickness:25mm | 6300x2000mm | 1 | |
| Fan motors | 3# | 250W/unit | 16 | |
| Suitable about 1500KG/batch | ||||
Packaging & Shipping
Packaging Details
Our Services
1) OEM service
2) Produce heat pump according to customer's special demands.
3) Supply spare parts according to order quantity.
4)Technical support for your installation, operation and maintenance.
5) One year’s warranty, and you can pay for extended warranty.
6)Spare parts and technical support at most economic prices after the warranty
If you are interested in our heat pump dryer, please contact us for more information (such as catalogue,video,prices,etc).
Fruit and vegetable drying machine is a special equipment on the basis of traditional net belt dryer.Fruit and vegetable drying machine has stronger pertinency,practiability and high efficiency of energey.The third generation Fruit and vegetable drying machine series dryer for vegetable dehydration has been developed.According to the characteristics of raw material to be dried and the process requirements of customers and combined the accumulated experience for more ten years,we have made the most suitable and the best dryer for vegetables dehydration for customers.The series equipment had won CNP,Its patent number is:Drying chamber type heat pump dehumidifier for fruit. vegetable dryer Drying chamber type heat pump dehumidifier for fruit can meet to dry different vegetables such as, root, halm, leaf, tuberous root, big granule and produce in batch. Meanwhile it can maintain content of nutrition, color, etc of vegetable in most extent.Shandong Leader Machinery Co.,ltd. The type raw materials are garlic, cushaw, giantarum, white turnip, yam, bamboo shoot, capsicum, onion, apple, etc.When operation, air will be entered into the dryer Drying chamber type heat pump dehumidifier for fruit and heated through heat exchanger. Being adapted scientific and reasonable cycle method, the hot air will pas through raw materials to be dried on the bed and carry out uniform heat exchange. Under the action of cycle fan Fruit and vegetable drying machine, the hot air stream inside each unit of the dryer will carry out hot air cycle.Shandong Leader Machinery Co.,ltd. Final air with Iow temperature and high damp will be out. The whole drying process Drying chamber type heat pump dehumidifier for fruitwith stably and high effect will be finished.
If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
Email:[email protected]
Whatsapp:+86 13064099546
Skype:leaderfoodmachine21
Contact:Mandy
NOTE:We can specially design the machine according to your production's features.