Fruit and vegetable drying machine is suitable for heating and solidification, and dehydration of raw materials in pharmaceutical industry, chemical industry,foodstuff industry,agricultural products, aquatic products, light industry heavy industry and so on. Such as medicine Hot-air circulating industrial fruit tray dryer of raw materials, Shandong Leader Machinery Co.,ltd. Chinese traditional medicine, tablet of drink, powder, granule, packing bottle, pigment, dyestuff, vegetable dehydration, dried fruit and melons, sausage, plastic resin, electric elements, drying varnish and so on. Fruit and vegetable drying machine series hot air circle oven is equipped with low noise axial flow fan and automatic temperature control system. The circle system Hot-air circulating industrial fruit tray dryer is fully sealed. Shandong Leader Machinery Co.,ltd. makes the hot efficiency increased from 3-7% of traditional oven to nearly 40%. The Hot-air circulating industrial fruit tray dryer maximum hot efficiency can be up to 70%. The successful design of Fruit and vegetable drying machine series hot air circle oven makes the hot air circle oven catch up the advanced level both at home and abroad. Shandong Leader Machinery Co.,ltd. makes country save plenty of energy source and increase profit of enterprises.
Specifications
1.New type energy saving dryers2.Drying / cooling / dehumidify all in one
3.Power failure remember
4.Supply drying chamber
KINKAI Air source heat pump drying machine introduction:
Features:
1. New design idea- a new genernation energy saving dryers with two times waste heat recovery;
2. Adopt heat regenerators to dehumidify;
3. Adopt touch screen controllers and dry/wet bulb to control temperature and humidity, operation drying machine easily and more accurate;
4. Adopt duct-type drying method, it with shorter drying time and well-distributed hot air, drying time shorter 30% than old models;
5.During drying, the material does not craze,does not distortions, non-discolouring,never degenerate, non-oxidize, drying completely,with good Rehydration, keep nutrient content;
6.Economical: LD heat pump technology offers running costs that are typically up to 75% lower than with a conventional drying mahcine;
7.Environmental friendly;
8.Multifunctions: heating drying / cooling drying / dehumidify;
9.High / low pressure protection;
10.Power failure remember;
11.Supply dryer+drying chamber.
How do air source heat pump drying machine work?
Technical Parameters
Model | JK03RD | JK06RD | JK10RD | |
Suitable for drying chamber | m3 | 10~20 | 20~30 | 30~40 |
Power supply | V/PH/HZ | 380/3/50 or 220/1PH/50 | 380/3/50 | 380/3/50 |
Power input | KW | 2.8 | 5.8 | 10.8 |
Running current | A | 8/17 | 12.6 | 22.5 |
Auxiliary electric heater(option) | KW | 9 | 9 | 9 |
Heating capacity | KW | 12 | 26 | 35 |
Cooling capacity | KW | 7.5 | 20 | 25 |
Dehumidification amount | L/H | 8 | 20 | 40 |
Max. hot air Temperature | °C | 75 | 75 | 75 |
Working ambient temperature | °C | -10~45 | -10~45 | -10~45 |
Refrigerant | Kg | Mixture type/2.5 | Mixture type/4.3 | Mixture type/8.0 |
Compressor | Type | Scroll | Scroll | Scroll |
Brand | Copeland/Danfoss | Copeland/Danfoss | Copeland/Danfoss | |
Quantity | 1 | 1 | 2 | |
Noise | dB(A) | 60 | 65 | 70 |
Fan motor for drying | Power input/unit | 250W/unit | 250W/unit | 250W/unit |
Wind volume | m3/H | m3/H | 2500m3/H/unit | |
Recommend qty | 8 | 8 | 16units | |
Heat regenerator size | mm | 500*350*350 | 500*500*580 | 550*600*680 |
Fan motor for heat regenerator (dehumidify) |
Power input | 200W | 370W | 550W |
Wind volume | 2000m3/H | 2000m3/H | 3500m3/H | |
Size(mm) | 450*330*380 | 470*320*470 | 580*320*580 | |
Wind valve | Power input | 6W | 6W | 6W |
OPEN | Exchange fresh air | Exchange fresh air | Exchange fresh air | |
CLOSE | Drying | Drying | Drying | |
Size(mm) | 480*320*120 | 630*560*120 | 720*640*125 | |
Fan motor for evaporator (2 units) |
Power input | 250W/unit | 780W/unit | 780W/unit |
Wind volume | 4600m3/H | 10500m3/H | 2*10500m3/H | |
Rotate speed | 1350RPM | 1350R/Min | 1350R/Min | |
Hot air outlet | mm | 600*1100 | 650*1100 | 860*1485 |
Hot air return inlet | mm | 690*1100 | 750*1100 | 1050*1450 |
Dimension(L*W*H) | mm | 1650*960*1280 | 1720*1160*1280 | 2100*1460*1590 |
Net weight | Kg | 210 | 385 | 480 |
Gross weight | Kg | 240 | 420 | 540 |
Applications
Can dry all kinds of materials, such as vegetables, fruits, apples, pawpaw, coconut, mango, banana, spice, sea cucumber, seaweeds, beef, jerky, fish, herbs, onions, gingers, chili, pepper, cabbage, carrot, tea leaves etc.
Our drying project cases:
Our business trade way:
1.MOQ: 1 pcs
2.Payment: T/T(30% deposit, 70% balance before shipment, except for samples 100%)
3.Delivery time: 7~25 days after received deposit
4.Warranty: one year
After installation,during the guarantee period,our company will be responsible for problems caused by quality of production or raw material except the damageable spare parts of heat pump caused by incorrect man-made operation.
Conventionally, materials are dried either in the field (sun drying) or using
high temperature dryers (electric, gas fired, etc.). Successful outdoor drying
depends upon good weather and indeterminate weather can render a product
worthless. High temperature drying can damage the nutrient content and impart an
unpleasant smell to the dried product.
Specialty crops such as ginseng, herbs, echinacea, etc.,
need to be dried at low temperatures (30 - 45Celsius degree) for product quality
optimization. This is an important consideration as they have a relatively high
commercial value. Heating ambient air to use for drying, although a simple
cost-effective procedure, is of limited application, particularly at higher
ambient air relative humidities because of the low allowable maximum temperature
conditions. Under high ambient moist air conditions, it may not even be possible
to dry the material by conventional means. High temperature drying deteriorates
the material structure and can render it unsuitable for further use. Low
temperature drying of specialty crops reduces the risk of loss in nutrient
content and damage to physical properties. Drying system incorporating a
dehumidification cycle have been developed that both conserve energy and handle
the material gently. The dryer operates using a heat pump where both sensible
and latent heats are recovered from the exhaust air. The heat is then recycled
back through the dryer by heating the air entering the dryer. The heat pump
drying system is a combination of two sub-systems: a heat pump and a
dryer.
The heat pump operates according to a basic air
conditioning cycle involving four main components: the evaporator, the
compressor, the condenser and the expansion valve.
The working fluid (refrigerant) at low pressure is
vaporized in the evaporator by heat drawn from the dryer exhaust air. The
compressor raises the enthalpy of the working fluid of the heat pump and
discharges it as superheated vapor at high-pressure. Heat is removed from the
working fluid and returned to the process air at the condenser. The working
fluid is then throttled to the low-pressure line (using an expansion valve) and
enters the evaporator to complete the cycle.
In the dryer system, hot and dry air at the exit of
condenser is allowed to pass through the drying chamber where it gains latent
heat from the material. The humid air at dryer exit then passes through the
evaporator where condensation of moisture occurs as the air goes below dew point
temperature.
Fruit and vegetable drying machine is a special equipment on the basis of traditional net belt dryer.Fruit and vegetable drying machine has stronger pertinency,practiability and high efficiency of energey.The third generation Fruit and vegetable drying machine series dryer for vegetable dehydration has been developed.According to the characteristics of raw material to be dried and the process requirements of customers and combined the accumulated experience for more ten years,we have made the most suitable and the best dryer for vegetables dehydration for customers.The series equipment had won CNP,Its patent number is:Hot-air circulating industrial fruit tray dryer. vegetable dryer Hot-air circulating industrial fruit tray dryer can meet to dry different vegetables such as, root, halm, leaf, tuberous root, big granule and produce in batch. Meanwhile it can maintain content of nutrition, color, etc of vegetable in most extent.Shandong Leader Machinery Co.,ltd. The type raw materials are garlic, cushaw, giantarum, white turnip, yam, bamboo shoot, capsicum, onion, apple, etc.When operation, air will be entered into the dryer Hot-air circulating industrial fruit tray dryer and heated through heat exchanger. Being adapted scientific and reasonable cycle method, the hot air will pas through raw materials to be dried on the bed and carry out uniform heat exchange. Under the action of cycle fan Fruit and vegetable drying machine, the hot air stream inside each unit of the dryer will carry out hot air cycle.Shandong Leader Machinery Co.,ltd. Final air with Iow temperature and high damp will be out. The whole drying process Hot-air circulating industrial fruit tray dryerwith stably and high effect will be finished.
If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
Email:[email protected]
Whatsapp:+86 13064099546
Skype:leaderfoodmachine21
Contact:Mandy
NOTE:We can specially design the machine according to your production's features.