Cheap price groundnut oil processing/production machine
Cheap price groundnut oil machine
Groundnut→Cleaning→ Hulling→ Separate Shell and Kernel→ Soften→Flaking→Cooking→Pressing
→Crude groundnut Oil →Groundnut oil filtration or to groundnut oil refinery
Price gruound oil machine as follows:
The main process of groundnut oil expeller machine :
1.Cleaning
In order to obtain high effective cleaning, ensure good work condition and production stability, high efficient
vibration screen was used in the process to separate big and small impurity. Suction type gravity stoner removing
machine was applied to remove the shoulder stone and earth, and magnetic separation equipment without power
and exhaust system were used to remove iron. Dust removing wind net is installed.
2.Cleaning
Put the raw material into the two discs.The relative movement between the two discs,the insection on the disc
surface make kneading function of the material hull,then make the hull fall down.Separate the shell and kernel.
3.Softening
Adjusting the moisture and temperature , so that increase the oilseed plasticity,reduce powder when flaking and
sticky roller, in order to ensure the quality of the flakes. conditioning can also reduce the vibration of the machine
when flaking roll wear, in order to facilitate the flaking operate normally.
4.Flaking
Flaking means a certainty granularity of soy lamella was prepared for flaked of about 0.3 mm, the oil of raw material can be extracted in the shortest time and maximum, and residual oil was less than 1%. the thickness is uniform,
moderate size, no out oil,less powder,and with a certain degree of mechanical strength.The fuel cell wall damaged,
then shorten the oil discharged from the oil seed away.
5.Cooking
Put the material into the toaster,the mixing blade is with continuous turning driven by the reducer.
The toaster is with interlayer design, heating media is hot conducting oil or steam, thus keep
the flaking temperature stable.
6.Pressing This is the oil out process, the soybean flake will be sent to oil press machine through the screw conveyor.
After pressing, we can get the crude cottoen oil.
Competitive price groundnut oil machine
The Buyer will transfers the payment for the Equipment and Technical Service into the
Seller’s account as follows:
1.The sum equal to 30% of the total amount of the Contract must be transferred by the buyer to the Seller’s account directly within Five (5) bank working days from the date when the Contract has been both signed as down payment.
2.The sum equal to 65% of the total amount of the Contract will be transferred by the buyer to the Seller’s account directly after cheaking and accepting the finished equipment in the seller's factory at five(5) bank working days .The goods are deemed accepted by the buyer after the signing of the"The act of acceptance of the equipment"by the representatives of the seller and the buyer.
3.The The sum equal to 5% of the total amount of the Contract must be transferred by the Buyer to the Seller’s account within five (5) banking days from the date of the TrialRunning Report has been both signed by the both representatives of the Buyers and Seller certifying that the Equipment is running at or better than the technical index stipulated in the Contract.
Factory productive ability:
Groundnut oil machine adapt to many materials,such as peanut,sunflower,cashew nut,shea nut,wulnut,corn germ,soybean,cottonseed,and more.
Groundnut oil machine delivery package: