High oil yield cotton seed oil mill expeller machinery with good price
Product Description
Cotton seed oil mill machinery flowchart:
Cotton seed — Delinting — Husking — Pre-press — Solvent Extraction — Oil Refining
After the pre-preseed,cottonseed cake technology paramters inquiryment:
|
Performance of Pre-pressed cake |
structure and moisture of oil cake |
extraction temperature |
Less than about 5 degrees of initial boiling point |
Less than about 5 degrees of initial boiling point |
90-120 miunts |
Height of bed of material |
Height of bed of material |
ratio of solvent and Mixed oil concentration |
0.8-1:1 , 18-25% |
Drain timeandwetmeal with the amount of solvent |
15-25min 25-30% |
Cotton seed oil mill machinery solvent oil extraction:
It is adapt solvent to steep or leaching the oil materials,to extract out the oil from oil materials and dissolved in solvent,and then get the miscella which contain solvent and oil both after filtration.To heat miscella,and the solvent will be evaporated and solvent-oil sepration,and then get crude oil.The crude oil after refining(hydration,alkali refining,decoloring and more),to become the edible oil which according to national standard.The evaporated solvent could be used circularly after cooling.
Cotton seed oil mill machinery solvent requirements:
.Dissolve in any proportion solvent at room temperature or low temperature
2.Wide choise well
3.Stable Chemical property
4.Recycle from oil and cake easily
5..The solvent can not react with all compenets and equipment material of the oil
6..The solvent should high purity and narrow scope of the boilling point
7.Small solubility,easy to separation and recycle
8.Solvent has no toxicity itself,neutral,no objection odor,make sure the sanitary inquirment and protecting pollution
9.Not inflammable and explosive
10.Rich source,and low price,apply to the demand of large scale prodution
Cotton seed oil mill machinery oil refining:
Item |
Function |
Alkali refining section |
used to P-acid de-gumming, alkali refining de-acid and water rinsing. |
Decoloring section |
used to remove off pigments, bleaching oils and grease dehydrate. |
Deodorizing section |
to remove off the odor components in oil. |
Dewaxing section |
used to remove off the wax in the oil, in order to get the high quality oil. |
Heat-transfer oil stove |
supply each device production needing heat energy, temperature reach above 280°C. |
Steam generator |
produce the needing steam for de-odoring and distillation. |
Vacuum pump |
supply needing vacuum for dehydrate, de-color, de-odor. Vacuum degree can reach above 755mm Hg. |
Press filter |
filter clay, filter out clear oil. |
Air compressor |
blow dry bleached clay, blow empty the leftover oil in the press filter. |
Company Information
LD'e Cottonseed Oil expeller manufacturers
Our main business:
• 10-500T/H oil material first cleaning,drying and storage section turn-key project.
• 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot peeling, bean skin crushing; the soybean extrusion, high oil contained pre-press cake extrusion, and high oil contained embryos puffed; of direct puffed). Rice bran production line turn-key project.
• Leaching workshop turnkey project (Towline extractor, Rotocel extractor, loop type extractor, DTDC separated machine, the full negative pressure evaporation, paraffin wax recovery, leaching workshop degum, phospholipid concentrate).
• 30-1000T/D oil continuous grade two or one physical (chemical) refining production line.
• 10-600T/D sunflower oil, rice bran oil, corn germ oil dewaxing turn-key project
• 10-200T/D Fatty acid esterification production cooking oil production line.
FAQ
We aslo take part in canton fair every year,if you have any needs,welcome you visit our exibition stand or visit our web,please send your enquiry to me!
