2TPD Sunflower/cotton/soybean/palm oil refining process
1. The advantages of palm oil refining process :
1. Professional manufacturer with over 30 years experience.
2. Certification: CE/BV/ISO.
3.Warranty: 365 days.
4. Motor: SIEMENS
5. The No.1 sale in China.
2. Working principle of palm oil refining process :
1.When oil press is on work, material enters the extruding chamber from the hopper and then moves forwards by the rotating pressing screw and is pressed.
2.Under high temperature condition in the chamber, there is quite strong friction among press screw, chamber and the oil materials.
3.On the other hand, root diameter of the pressing screw carries larger from one end to the other.
4.Hence when rotating, the thread not only pushes particles moving forwards but also turns them outwards as well.
5.Meanwhile, particles adjacent the screw will rotate along with screw’s rotating, causing every particle inside the chamber to possess different speed.
6.Therefore, relative movement among particles creates neat which is necessary during manufacturing because of helping protein change property, damage colloid, increase plasticity, decrease oil’s elasticity, resulting in high oil.
3. Press raw material of palm oil refining process :
1.This machine is the quite advanced one among the processing machinery of oil plants .
2.It can be applied to the coconuts, olive, sunflower, soybean,cotton seeds , tee seeds rice bran, flaxseeds, sesame, peanuts, rape, cocoa,etc.
4. Small refining machine of palm oil refining process :
Main equipment:
Neutralize pot: used to acid refining, alkali refining and washing.
Decoloring pot: used to bleaching grease and get rid of pigment.
Deodorization pot: used to remove grease’s stink, machine’s raw material is stainless steel.
Conductive oil boiler: supply the heating that needs during produce, temperature up to 280℃.
Vacuum pump: supply the vacuum for decoloring and deodorization sections, up to above 755mmHg.
Operating introduction:
Tip: different oil has different operation conditions, follow information only for reference.
The preparation before open the machine:
1.Test the crude oil first, measure acid value and color, also can do small sample test in lad if condition allowed.
2.Connect cooling water.
3.Prepare clay, NaOH, coal.
4.Connect electricity.
5.Check vacuum pump, air compressor, pressure filter, conductive oil pump.
6.Conductive oil must be heated about 5 hours when temperature is 98℃, every time you change it, if there is no water vapor overflow from elevated tank, then the temperature can heated up to 280℃.
5. Factory introduction of palm oil refining process :
Shandong LD'e Grain&Oil Machinery Co.,Ltd is a large-sized joint-equity enterprise which specialize in producing edible oil mechanical equipment and it is also a group enterprise integrating scientific research, manufacturing, sales as one. Research Institute of Machine Design Company and Shandong, Shandong University of Technology (formerly the Shandong Grain College) school-enterprise cooperation in the oil equipment to carry out long-term, protein extraction, phospholipid extraction, etc. R & D and application of new technologies.
6. Certification of palm oil refining process :
7. Our office of palm oil refining process :
8. Our achievement of palm oil refining process :
9. Final product of palm oil refining process :
10. Any question, pls call us for palm oil refining process :