Why do you choose the Shandong Leader Machinery Co.,ltd. Automatic Control System Heat Pump Drying Machine For Fruit?
1.Healthy! Pure mechanical squeezing craft maximally keeps the nutrients of the oil plants.No chemical substances left
2. High working efficiency! Due to a high working efficiency of the screw oil press machinery,both time and power can be saved.
3. Long durability! All the parts are made of the most suitable material and treated with refined crafts, such as cemented quenching and tempering to increase the hardness, consequently the durability.
4. Automatic Control System Heat Pump Drying Machine For FruitCost-effective! Low investment! The wearing parts on the oil press machinery such as the squeeze loop, squeeze spiral and squeeze bar are designed to be dismountable. When they are out of service period, users only need to replace them and there is no need to displace the whole machine.
Automatic Control System Heat Pump Drying Machine For Fruit
Product Description
What Are LD Heat Pump Drying Machine For Fruit?
LD third generation heat pump drying machine for fruit is a device that transfers heat from a coLDr area(ambient temperature) to a hotter area(drying chamber) by using mechanical energy. Cycle hot air assures uniform drying and high efficiency.
How Does It Work?
1, Dryer evaporator of refrigerant absorb the air from outside
2, then compressor works that make the air temperature rise
3, heat exchanger change the hot air into drying chamber
4, final fruits will be dried by the hot air circulating in drying chamber
What Is The Advantage?
1, Energy saving
Adopt air to air heat pump technology, absorb heat from air and recovery waste heat at the same time
Adopt close dehumidify + circulating drying type, saving operating cost;
2, Easy operating control system
The drying temperature can be easily controlled by PLC +Touch Screen control system.
3, Uniform drying
By using the forced ventilation function, there are partition sheet and fan motors inside the drying chamber to make sure hot air cycle, so the raw materials can be dried evenly
4, The temperature: 10-75°C, Max 75°C
5, The baking plate dimensions and materials can customize as customer request.
6, During drying, the material does not craze, does not distortions, non-discoloring, never degenerate, non-oxidize, drying completely, with good rehydration, keep nutrient content;
7, Safe and reliable operation
Automatic intelligent control, 24-hour continuous drying; Without waste gas and waste heat pollution,low noise
Stable operation without being influenced by weather
What is The Main Parts In One Set?
Buying Guides
Which Model Should I Buy?
Recommend Dryer + Drying Chamber Size | |||
Item | Description | Product Capacity | Drying Chamber size |
1 | One unit JK03RD dryer + drying chamber | 300Kg / batch | 3300*1900*2200mm |
2 | One unit JK06RD dryer + drying chamber | 600Kg / batch | 6000*2800*2200mm |
3 | One unit JK10RD dryer + drying chamber | 1000Kg / batch | 6000*3000*2200mm |
4 | Two units JK03RD dryers + drying chamber | 1200Kg / batch | 7000*2200*2200mm |
5 | Two units JK06RD dryers + drying chamber | 1500Kg / batch | 10000*2800*2200mm |
6 | Two units JK10RD dryers + drying chamber | 2500Kg / batch | 10000*3000*2200mm |
Warm prompt: We can make any drying chamber sizes as your required.
Company Information
Factory and Workshop
Customers and Our Team
Packaging & Shipping
For heat pump dryer parts---with plywood
For drying chamber +trolleys
If shipped with 20ft container or 40ft container, no packing
If shipped with LCL( less than container load), packed in plywood.
Our Services
A. Technical service
1, We calculate the capacity and recommend the models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
B. After-sales service
1, Technical support for your installation, operation and maintenance.
2, One year’s warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.
If you are interested in our heat pump drying machine for fruit, welcome to contact us for more information, such as catalogue, video, etc.
Automatic Control System Heat Pump Drying Machine For Fruit is suitable for heating and solidification, and dehydration of raw materials in pharmaceutical industry, chemical industry,foodstuff industry,agricultural products, aquatic products, light industry heavy industry and so on. Such as medicine of raw materials, Chinese traditional medicine, tablet of drink, powder, granule, packing bottle, pigment, dyestuff, vegetable dehydration, dried fruit and melons, sausage, plastic resin, electric elements, drying varnish and so on.
AAA1
Automatic Control System Heat Pump Drying Machine For Fruit is equipped with low noise axial flow fan and automatic temperature control system. The circle system is fully sealed. It makes the hot efficiency increased from 3-7% of traditional oven to nearly 40%. The maximum hot efficiency can be up to 70%. The successful design of Automatic Control System Heat Pump Drying Machine For Fruit makes the hot air circle oven catch up the advanced level both at home and abroad. It makes country save plenty of energy source and increase profit of enterprises.
AAA2
If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
LD Miss Candy
Skype: leaderfoodmachine9
Mobile: +86 18363700691 (Also WhatsApp & Wechat)
Email: [email protected]