Full automatic control 4m-30m length cca acq preservative pressure wood treatment equipment

Shandong Leader Machinery Co.,ltd. Provide all kinds of oil machine Full automatic control 4m-30m length cca acq preservative pressure wood treatment equipment : mini oil plant, oil extraction mill, oil refinery machine, small oil factionry mills, large oil processing line, etc.Single oil machine and turnkey oil processing project Corn Germ Oil Pressing Machine for Corn Oil Mill are both available.Oil plants Corn Germ Oil Pressing Machine for Corn Oil Mill include: coconut oil machine, palm oil mill, sesame oil plant, soya bean oil machine,rice bran oil extraction machine , peanut groundnut oil plant, rapeseed oil machine, corn germ oil machine and other vegetable oil plant.Custom design for household oil machine Corn Germ Oil Pressing Machine for Corn Oil Mill and oil factory turnkey project with installing and adjusting.Corn Germ Oil Pressing Machine for Corn Oil Mill Stainless steel material been used to meet the food hygiene standard. Full automatic control 4m-30m length cca acq preservative pressure wood treatment equipment Cold lower temperature keep in pressing technology.Shandong Leader Machinery Co.,ltd. Warranty for 1 year free after-sales service, include replace parts.Full automatic control 4m-30m length cca acq preservative pressure wood treatment equipment High quality parts, stable oil pressing effect, saving maintenance cost.Shandong Leader Machinery Co.,ltd. Military industrial manufacturing, quality chrome materials, quality trustworthy.

Full automatic control 4m-30m length cca acq preservative pressure wood treatment equipment

1. The usage of wood treatment equipment

• Wood pressure treatment equipment can be used for wood preservation, wood flame-resistant, wood coloring, mainly for timbers. The wood can be used for 15-50years, the wood can adapt to all kinds of environment.
• Wood pressure treatment equipment apply to be preservation, termite proof and to prevent fungal.

Parameter range:

1) Working pressure: -0.08MPa--3.6MPa

2) Working temperature: 0--200°c

3) Vocuum degree(relative): 0.098MPa

4) Capacity ( one time ): 2 / pot--20 /pot

5) Length: 6-50m

6) Diameter: 1-5m

3. The working principle of wood treatment equipment

Working processes:

• Inicial vacuum: suck air out of tank and wood with vacuum pump and keep the vacuum status 15minute to 1 hour according to treatment aims. Vacuum status is good for agent liquid goes into wood.The vacuum degree can be 0.098MPa.

• Agent liquid adding: under condition of vacuum pump agent liquid into tank.

• Pressurizing: when tank is full of agent liquid, pressurize tank with pressure pump. The pressure inside tank will rise slowly to rated pressure.Then keep the tank under rated pressure until wood have absorbed enough agent liquid.

• Pressure discharging: when wood have absorbed enough agent liquid,discharge inside pressure and agent liquid that have not been absorbed.

• Final vacuum: when the rest agent liquid has been discharged,suck air out of tank and wood with vacuum pump again to make redundant.Agent liquid exude from wood. cells or surface to avoild liquid drops.

4. 3D drawing of wood treatment equipment

5. Installation of wood treatmnet equipment

6. The delievry of wood treatment equipment

7. Productions in our workshop of wood treatment equipment

8. ABOUT LD CEREALS&OILS MACHINERY CO.:

♦ More than 60 years manufacture histories.

♦ Largest oil machine manufacturer in China.

♦ 100,000 m² of factory total area and 580 senior engineering technicians.
♦ 23 National patents.
♦ 87 million yuan fixed assets.

♦ 150 million annual sales turnover.

9. LD COMPANY ADVANCED EQUIPMENTS:

10. LD CUSTOMERS VISITING OVER THE WORLD:

11. STATE LEADERS VISITING TO LD:

12. LD OVERSEA EXHIBITION:

If you want to know more information about our project, Please Leave Message on below form and click "send" below. I will reply to you. Thanks!

There are certain factors exist in the crude oil, such as free fatty acid, water, suspended impurities, volatile matter, odors and etc. The oil refinery Full automatic control 4m-30m length cca acq preservative pressure wood treatment equipment adopts the advanced technology to separate the impurities from oil, and then get the edible oil. The main function of this type oil refinery Corn Germ Oil Pressing Machine for Corn Oil Mill is to produce the high quality refined oil.Shandong Leader Machinery Co.,ltd. Hydration degumming is the use of phospholipids and other insoluble impurities hydrophilic gum, a predetermined amount of hot water or dilute alkali, salt, and phosphoric acid electrolyte aqueous solution Full automatic control 4m-30m length cca acq preservative pressure wood treatment equipment are added under stirring in the hot crude oil, so that one of the water absorption gel aggregated insoluble impurities , then separated. This process of Full automatic control 4m-30m length cca acq preservative pressure wood treatment equipment uses the warm water of hydration process type, a small oil refinery in warm water commonly used method. Further, by adding a certain amount of hydrated phosphoric acid, Corn Germ Oil Pressing Machine for Corn Oil Mill after the reaction, the oil in the nonhydratable phosphatide, converted to hydratable phosphatide. Such

phospholipid content is greatly reduced, can achieve better results unglued.

If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
Email:[email protected]
Whatsapp:+86 13064099546
Skype:leaderfoodmachine21
Contact:Mandy

NOTE:We can specially design the machine according to your production's features.