40TPH Fresh Palm Fruit Press Palm Oil Production Line

40TPH Fresh Palm Fruit Press Palm Oil Production Line produced and supplied by Shandong Microwave Machinery Co.,Ltd.
1.Application scope of Seed Hydraulic Press Machine:
40TPH Fresh Palm Fruit Press Palm Oil Production Line made by Shandong Microwave Machinery Co.,Ltd. company has many advantages: 40TPH Fresh Palm Fruit Press Palm Oil Production Line is easy to operate, high oil press rate, rare to replace wearing parts, so Seed Hydraulic Press Machine is the most advanced equipment 40TPH Fresh Palm Fruit Press Palm Oil Production Line can replace of the manual operation of the sesame oil. This 40TPH Fresh Palm Fruit Press Palm Oil Production Line can press at least 2 to 7 kilograms per batch, the time is about 4 to 6 minutes, so Seed Hydraulic Press Machine is very suitable for the citizens who live in the big and medium cities becLDe they want get the high quality of oil of spending money. 40TPH Fresh Palm Fruit Press Palm Oil Production Line is also can be used in the countryside, becLDe the speed of oil pressing is fast so people can bring 40TPH Fresh Palm Fruit Press Palm Oil Production Line oil raw material to press oil. In this way, 40TPH Fresh Palm Fruit Press Palm Oil Production Line can be assured of the purity of their oil.40TPH Fresh Palm Fruit Press Palm Oil Production Line can be used for process many kinds of raw material: sesame, walnut kernel, peanut, pine seed (better to get rid of the shell), almond, spricot kernel, perilla, cocoa bean, linseed and other oil crops.
2. Structure of Seed Hydraulic Press Machine:
40TPH Fresh Palm Fruit Press Palm Oil Production Line mainly includes three parts:
1. Main engine 2. Hydraulic system 3.electrical system
The following is the specific introduction of 40TPH Fresh Palm Fruit Press Palm Oil Production Line:
1. main engine of 40TPH Fresh Palm Fruit Press Palm Oil Production Line:
Seed Hydraulic Press Machine Main engine includes base,upright,top plate,oil drip pan,nut and etc 40TPH Fresh Palm Fruit Press Palm Oil Production Line is one of the main parts. When the oil material is put into the assembly of the press boring,then 40TPH Fresh Palm Fruit Press Palm Oil Production Line being driven up by the oil cylinder piston ,oil will be outflow from the gap of press boring,and then 40TPH Fresh Palm Fruit Press Palm Oil Production Line pass the oil drip pan to the drum for oil storage.

In Africa 40TPH 40TPH Palm Oil Production Line

We have made 40t/h and 80t/h palm oil mill machine for Indonesia,and we have cooperate

with Sinar Mas Group in Indonesia,hope you can visit those project if you want.

1. Who is LD?

a. Leading manufacturer of edible oil mechanical equipment.

b. Factory with more than 30 years manufacturing experience.

c. School-enterprise partner of Henan Technology University .

2. What can LD do for you?

a. 5-2000T per day oil seeds press production line.

b. 10-1000T per day solvent extraction production line.

c. 1-600T per day edible oil refinery production line.

3. Where have LD exported to ?

a. Europe:Serbia,Romania.

b. America:Peru,Paraguay,America.

c. Africa:Egypt,Nigeria,Cameroon,Ghana,Malawi,Burkina faso.

d.Asia:Indonesia,Kazakhstan,Russia,Thailand,Ukrain,Bangladesh,Uzbekistan,Pakistan.

In Africa 40TPH palm oil equipment

In Africa 40TPH palm oil equipment

In Africa 40TPH palm oil equipment

Palm oil production main process:

1. After transport the FFB to palm oil mill ,the fruits will go to stelizer by conveyor or palm fruit

cage.

2. After seperate palm fruits and palm bunch by thresher,Palm fruits will be conveyed to palm oil

pressers to get CPO.Palm bunch can be used as fetilizer or fuel.

3. After pressing,we can get palm cake and palm nut.Palm nuts will be conveyed to palm recovery

system to get palm kernels,fiber,palm shell.Palm cake will be conveyed to boiler roon as well.

4. After filtering,centrifuging,vacuum drying ,we can get crude palm oil (CPO),The CPO can be

sold directly or use for futher processing.

5. The sewage from all the plant will be processed by sewage treatment to reach discharge

standard.Sludge can be used for fertilizer in palm plantation.All the process cycle features with

short operation cyclye ,high automaticity,energy conservation and environment protection.

Reception of palm oil equipment :

The FFB bunch be transported to plant by truck, after be weighted by weighting bridge,

the FFB will be loaded down to FFB Loading Ramp.

Loading Ramp:

Sterilization of palm oil equipment :

1.By Scraper Conveyor, FFB be transported to the top of sterilizing tank.

Falling into sterilizing tank from feed inlet.

2. Sterilizing tank: Adopt vertical type sterilizer, Welded up by Q235B material

(Chemical composition:C 0.12~0.2%,Si 0.12~0.3%,Mm 0.3~0.7%,P

S

3. After FFB be transported into sterilizing tank (202), close the inlet of sterilizing tank,

and open the vent valve behind the

tank, saturating steam, which pressure is 3bar and temperature is around 130℃. After

all cool air been discharged out,

close vent valve, proceed to sterilizing section. Sterilizing time is 55~120minutes.

4. The sterilizing time also should be depend on the kind and quality of FFB, if the

pressure is too high or the time is too long, palm fruit will be rot, also Resulting

in the loss of oil, high temperature can change palm color.

5. Finish sterilizing process, close the steam valve, open the valve lead to Blow-off/down

Silencer. Open the sterilizing tank door(FFB outlet) after discharges out all

steam and water.

6. Open the sterilizing tank door(outlet), sterilized FFB will fall on the FFB Scraper conveyor.

Be transported to next station.

Threshing of palm oil equipment :

Separate the fruit from the bunch through strong vibrating.

1.The sterilized FFB will be transport to thresher platform by scraper conveyor.

2.We adopt advanced Drum type thresher, insider diameter is φ1800mm, length is 5000mm.

The material of main shaft is #45 steel (main chemical composition is C0.42~0.50%, Si0.17~0.37%,

Mm0.50~0.30%, P≤0.035%, S≤0.035%, Cr≤0.25%, Ni≤0.25%, Cu≤0.025%).

3.Sterilized FFB be twisted and knocked in thresher. Palm fruit will be separated from empty bunch

totally, fall on Fruit Scraper conveyor though fence, the empty bunch will be transported to Bunch

Temporary tank by Bunch Scraper conveyor.

Digesting of palm oil equipment :

Pressing station:

1. The palm fruit is transported to Crush tank by fruit elevator.

2.The fruit in crush tank will be heated to 90~95℃(by indirect steam), crush time is

10~20 minutes.

3.The pounded fruit flow into Palm fruit oil presse to press. Oil press cone can control

cylinder, working pressure is 50~70bar, revolving speed of presser main shaft is

12.5 r/min. Meanwhile the mixture of crude palm oil and water outflow from barrel

holes. Crude oil will be flow in Temporary Storage oil tank through crude oil groove.

Then oil will be pumped to Screening filter by oil pump. After filtering remove the oil

foam, deposit impurities. Palm oil flow into Passivating oil tank. The fiber cake and

nuts are eLDLDted from clearance of cone head drop on Breaking cake auger .

4. Palm fruit oil presser , the material of main shaft is 40Cr steel, (Chemical component:

C 0.37~0.44%,Si 0.17~0.37%,Mn 0.50~0.80%,Cr 0.80~1.10%) have been thermal refining,

the material of worm and cone head is 45# Cast-Steel, and the surface have quenching

treatment.

1. After removing the fiber and oil residue by Screening filter, palm crude oil flow

into Passivating oil tank.

2. The passivating oil tank will be inlet indirect steam and directly steam, after passivation

treatment palm oil and water mixture will be pumped to High level tank by Chemical

centrifugal pump, then flow into Clarifying tank stably.

3. There is steam pipe coil in clarifying tank, which can make water oil dilution ratio

stable, and separate water from mixture. And there is oil and sewage outlet, in case the

oil flowing will be short circuit, keep oil temperature around 100℃. After remove sludge

by filter, the water will return clarification tank to keep the water and oil ratio. The

waste water be discharged by another drain-pipe, which with special structure.

4. Clarified oil flow into storage oil tank from discharge hole of clarification tank , after

Disc-type separator remove moisture in the oil, then though Plate heat exchanger

heating to 105℃, remove residual moisture out from oil by Vacuum drier.

5. Vacuum degree of vacuum drying is achieved by Vacuum pump . The power of

vacuum pump is 5.5kw, adiabaticpressure is 23mmHg, the maximum capacity of

eLDLDt is 120m3/h.

6. The oil have been dried pumped to pure oil tank by Shielding pumps .

7. When the oil temperature in pure oil tank is about 50℃, oil will be pumped to produced

oil tank by gear oil pump.

Tricanter:

Desanding Tank:

Contact us:

Carrie-Sales manager

Shandong Microwave Machinery Co.,Ltd.

Web: www.epier.com

Email: [email protected]

Skype:leaderfoodmachine10

Moblie:0086-15020017267(also WhatsApp)

Shandong Microwave Machinery Co.,Ltd.is a Seed Hydraulic Press Machine factory specializing in the production of 40TPH Fresh Palm Fruit Press Palm Oil Production Line, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide Seed Hydraulic Press Machinecustomers with design and services of 1-2000 tons 40TPH Fresh Palm Fruit Press Palm Oil Production Line. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects Seed Hydraulic Press Machineover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type Seed Hydraulic Press Machineoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. Seed Hydraulic Press Machineequipment has been successfully exported to more than ten countries: Russia, LDtralia, India, Afghanistan, Cameroon,and so on.