Supply full complete set of oil pressing equipment
Oil processing process
1.Cleaning
In order to obtain high effective cleaning, ensure good work condition and production stability, high efficient vibration screen was
used in the process to separate big and small impurity. oil pressing equipment
Suction type gravity stoner removing machine was applied to remove the shoulder stone and earth, and magnetic separation
equipment without power and exhaust system were used to remove iron. oil pressing equipment
Dust removing wind net is installed.
2. Flaking
Flaking means a certainty granularity of soy lamella was prepared for flaked of about 0.3 mm, the oil of raw material can be
extracted in the shortest time and maximum, and residual oil was less than 1%.
3. Cooking
This process is heating and cooking for rapeseed which is easy to separate of oil and can provide the oil quantity from pre-press
machine.It is easy to operate and have long life. oil pressing equipment
4. Oil press machine
oil pressing equipment is continuous screw press machine which is suitable to
the plant oil materials which has high oil content.
The instruction of the cake is loose and easy to make the solvent permeate ,the oil content of cake and moisture used for solvent
extraction.
5. Crude oil refining
Oil refining is according to the different usage and requirements, utilizing the physical methods and chemical
processes to get rid of the harmful impurities and needless substance in the crude oil, getting standard oil.
Main economic and technical parameters of oil pressing equipment
Residual oil in meal |
â¤1% (soybean) |
Solvent consumption |
â¤3Kg/T(6#solvent oil) |
Crude oil moisture and volatile matter |
⤠0.30% |
Power consumption |
⤠15KWh/T |
Steam consumption |
â¤280Kg/T (0.8MPa) |
Finished meal moisture |
⤠10-13% (adjustable) |
Residual solvent in finished meal |
⤠300PPM (qualified detonated experiment) |
Moisture of extraction material |
5-8% |
temperature of extraction material |
50-55°C |
oil content of extraction material |
50-55°C |
oil content of extraction material |
14-18% |
thickness of extraction cake |
less than 13mm |
powder porosity of extraction material |
less than 15% (30 mesh) |
steam |
more than 0.6Mpa |
solvent |
national standard No. 6 solvent oil |
electric power |
50HZ 3*380V±10% |
Electric ligLDing |
50HZ 220V ±10% |
Temperate of supplement water |
less than 25°C |
Hardness |
less than 10 |
volume of supplement water |
1-2m/t raw material |
temperature of recycle water |
less than 32°C |
Full complete set of oil pressing equipment pictures
Our factory pictures
