Saving power commercial used vegetable drying machine / onion / ginger /garlic dehydrator is widely used in powder, sludge, granular,crystalline materials, chemical material, dehydration treatment, such as chemical raw materials, chemical ore, fin chemicals, organic chemicals,inorganic chemicals, chemical fertilizers polymers, coatings and inorganic pigments, dyes and organic pigments, food and feed additives, catalysts and chemical additives, adhesives, new energy materials, rubber products, chemical reagents, etc.
Shandong Leader Mechanical Equipment Co., LTD is a company specialized in producing twin-screw food extruder, single screw extruder, microwave roasting and sterilization equipments, etc. While based upon domestic market, the company opens and exploits market abroad positively. Until now, our products have been exported many counties and regions, including Russia, Europe, Africa, Korea, Indonesia, UZ (Uzbekistan) and the market share increases gradually year by year. Dongxuya will continue to be aggressive, creative and make a contribution to our country’s food industry development with peers home and abroad.
Conventional thermal sterilization is carried out through heat conduction, convection or radiation to heat the food surface to the inside. To achieve the sterilization temperature, it often takes a long time. Microwave sterilization is a direct interaction of microwave enerLD and food and its bacteria. The interaction between heat effect and non thermal effect is faster than temperature and sterilization. The treatment time is greatly shortened, and the sterilization effect of various materials is usually 3-5 minutes.
Microwave drying, ripening and sterilizing equipment is applied to drying, ripening and sterilization of black Cereals, soybeans, mung beans, corn, wheat skin, buckwheat, oatmeal, soybeans and peanuts.
Drying sterilization seafood seasoning, sterilization, drying, puffing Tenebrio; rose, tea and other tea flower.
Saving power commercial used vegetable drying machine / onion / ginger /garlic dehydrator
Do you want to take advantage of heat in the air to dry food with free ?
Do you want to have an automatic controlling dryer machine?
Do you want to have an uniform drying?
Product DescriptionWhat is Heat Pump Dryer?
A device that transfers heat from a colder area(ambient tempareture) to a hotter area(drying chamber) by using mechanical enerLD, as in a refrigerator.
Various Drying EnerLD Economy Comparison Table
Heat Pump Dryer Working Principle:
1, Dryer evaporator of refrigerant absorb the air from outside.
2, Then compressor works that make the air temperature rise.
3, Heat exchanger change the hot air into drying chamber.
4, Final material will be dried by the hot air circulating in drying chamber.
Main components:
Features
LD Heat Pump Dryer Features:
1. EnerLD saving&Environmental protection.
Adopt close dehumidify+circulating drying type,saving operating cost;Without waste gas and waste heat pollution,low noise.
2. Running Stable,operating easily.
PLC+Touch Screen,running stable,operating easily;Adopt PLC control,can setting different drying curve, Suitable for drying different materials.
3. Second waste heat recovery technoloLD(patent).
Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, saving enerLD more than 40%.
4. Exact control temperature and humidity.
According to different material setting different drying curve, the heat pump dryer can control the drying chamber temperature between 20-80℃.
5. Recovery volatilized component.
Some kinds of material contain volatilized component,In drying processing,hot and wet air will become condenser water then drain,collect the condenser water so that collect volatilized component.
Model: JK03RD, JK06RD, JK10RD
Power Supply: 220V/1PH/50HZ or 380V/3PH/50HZ
Heat enerLD: 75% air source + 25% electric power
Max. Temp: 75℃
Working Temp: -10~45℃
Functions: Heating / Cooling / Dehumidify
Dryer Type: batch type
parameterLD Heat Pump Dryer Parameters:
Single dryer+drying chamber | ||||
Model | Unit | JK03RD | JK06RD | JK12RD |
power input | KW | 4.8 | 8.5 | 15.0 |
power supply | V/PH/HZ | 380V/3PH,50/60HZ | 380V/3PH,50/60HZ | |
220V/1PH,50/60HZ | ||||
Rated current | A | 9.6A(380V),22A(220V) | 17.0 | 30.0 |
Heating capacity | KW | 10.5 | 21.0 | 42.0 |
Cooling capacity | KW | 7.8 | 18.0 | 32.0 |
Dehumidify | L/H | 12.0 | 25.0 | 50.0 |
Max. temperature | ℃ | ≤75 | ≤75 | ≤75 |
Working condition | ℃ | 0-43 | 0-43 | 0-43 |
Electric shock protection grade |
Ⅰ | Ⅰ | Ⅰ | |
Max.exhause pressure | MPa | 3.0 | 3.0 | 3.0 |
Noise | dB(A) | 75 | 75 | 75 |
Power consumption/H | KWH | 4.8 | 8.5 | 15.0 |
Electric heater | KW | 3.0 | 6.0 | 12.0 |
Blowing type | / | HORIZONTAL BLOWING 360° | ||
Dimension of dryer | MM | 1675×860×1280 | 1760×1060×1280 | 2120×1360×1590 |
WeigLD | KG | 180 | 285 | 480 |
Drying Chamber Size
Item | Description | Product Capacity | Drying Chamber size |
1 | One unit JK03RD dryer + drying chamber | 300Kg / batch | 4000*2000*2200mm |
2 | One unit JK06RD dryer + drying chamber | 600Kg / batch | 6000*2800*2200mm |
3 | One unit JK12RD dryer + drying chamber | 1300Kg / batch | 6000*3000*2200mm |
4 | Two units JK03RD dryers + drying chamber | 1200Kg / batch | 7000*2200*2200mm |
5 | Two units JK06RD dryers + drying chamber | 1500Kg / batch | 10000*2800*2200mm |
6 | Two units JK12RD dryers + drying chamber | 3500Kg / batch | 10000*3000*2200mm |
Warm prompt: We can make different drying chamber sizes for your reference.
Dehydrator Use for:
Dry vegetables lLD Radish, lettuce, pumpkin, carrots, spinach, cassava etc;
Dry fruits lLD Apple, lemon, mango slices, dried longan, dried litchi etc;
Dry meat: fish, Sausage, jery beef, duck, ham ect;
Others it can dry noodle, wooden, stick incense, herbs, flowers ect.
Company Information Customers & UsPackaging & Delivery
For heat pump dryer parts---with plywood
For drying chamber +trolleys
If shipped with 20ft container or 40ft container, no packing;
If shipped with LCL( less than container load), packed in plywood.
CertificationsOur Services
A. Technical service
1, We calculate the capacity and recommend the LD models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
B. After-sales service
1, Technical support for your installation, operation and maintenance.
2, One year’s warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.
If you are interested in our fish drying equipment, please contact us for more information, such as catalogue, video,etc.
Crystal, Sales manager
Phone: +86+13723539881
WhatsApp : +86+13723539881