food Tomato Drying Equipment / Industrial Vegetable Dryer processing machinery is widely used in powder, sludge, granular,crystalline materials, chemical material, dehydration treatment, such as chemical raw materials, chemical ore, fin chemicals, organic chemicals,inorganic chemicals, chemical fertilizers polymers, coatings and inorganic pigments, dyes and organic pigments, food and feed additives, catalysts and chemical additives, adhesives, new energy materials, rubber products, chemical reagents, etc.
Shandong Leader Mechanical Equipment Co., LTD is a company specialized in producing twin-screw food extruder, single screw extruder, microwave roasting and sterilization equipments, etc. While based upon domestic market, the company opens and exploits market abroad positively. Until now, our products have been exported many counties and regions, including Russia, Europe, Africa, Korea, Indonesia, UZ (Uzbekistan) and the market share increases gradually year by year. Dongxuya will continue to be aggressive, creative and make a contribution to our country’s food industry development with peers home and abroad.
Conventional thermal sterilization is carried out through heat conduction, convection or radiation to heat the food surface to the inside. To achieve the sterilization temperature, it often takes a long time. Microwave sterilization is a direct interaction of microwave enerLD and food and its bacteria. The interaction between heat effect and non thermal effect is faster than temperature and sterilization. The treatment time is greatly shortened, and the sterilization effect of various materials is usually 3-5 minutes.
Microwave drying, ripening and sterilizing equipment is applied to drying, ripening and sterilization of black Cereals, soybeans, mung beans, corn, wheat skin, buckwheat, oatmeal, soybeans and peanuts.
Drying sterilization seafood seasoning, sterilization, drying, puffing Tenebrio; rose, tea and other tea flower.
Our Company
Factory
Workshop
Warehouse
Team
Working Principle
A device that transfers heat from a colder area (ambient temperature) to a hotter area (drying chamber) by using mechanical enerLD, as in refrigerator.
Products Show
Dehydrator Use for :
Dry vegetables lLD Radish, lettuce, pumpkin, carrots, spinach, cassava etc
Dry fruits lLD Apple, lemon, mango slices, dried longan, dried longan etc
Dry meat: fish, Sausage, jery beef, duck, ham ect
Others it can dry noodle, wooden, stick incense, herbs, floers ect.
Dehydrator Functions:
Heating drying
Cooling drying
Heating +dehumidify drying
LD Drying Cases
LD Mushroom DryingLD Noodles DryingLD Meat DryingOur Dryer Features
*Running Stable, operating easily
Touch screen, runnig stable, operating easily, can set different drying curve, suitable for drying different materials.
*Second waste heat recovery technoloLD(patent)
Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, saving enerLD more than 70%.
*Exact control temperature and humidity
According to different material setting different drying curve, the heat pump dryer can control the drying chamber temperature between 10-75C.
*Recovery volatilized component
Some kinds of material contain volatilized component, in drying processing, hot and wet air will become condenser water then drain, collect the condenser water so that collect volatilized component.
* EnerLD saving&Environmental protection
Adopt close dehumidify+hot air circulating drying type, saving operating cost; Without waste gas and waste heat pollution; Low noise
Buying Guide
| Recommend Dryer + Drying Chamber Size | |||
| Item | Description | Product Capacity | Drying Chamber size |
| 1 | One unit JK03RD dryer + drying chamber | 300Kg / batch | 4000*2000*2200mm |
| 2 | One unit JK06RD dryer + drying chamber | 600Kg / batch | 6000*2800*2200mm |
| 3 | One unit JK12RD dryer + drying chamber | 1000Kg / batch | 6000*3000*2200mm |
| 4 | Two units JK03RD dryers + drying chamber | 1300Kg / batch | 7000*2200*2200mm |
| 5 | Two units JK06RD dryers + drying chamber | 1500Kg / batch | 10000*2800*2200mm |
| 6 | Two units JK12RD dryers + drying chamber | 3500Kg / batch | 10000*3000*2200mm |
Warm prompt: Drying Chamber Size can customize.
| Model Unit | Unit | JK03RD | JK06RD | JK12RD |
| Power input | KW | 4.8 | 8.5 | 15 |
| Heating capacity | KW | 12 | 26 | 42 |
| Cooling capacity | KW | 7.5 | 20 | 32 |
| Power supply | V/PH/HZ | 380V~3PH,50/60HZ OR 220V~1PH,50/60H | 380V~3PH,50/60H | 380V~3PH,50/60H |
| Rated current | A | 380V: 10A 220V: 23A | 17 | 30 |
| Dehumifification amount | L/H | 12 | 25 | 50 |
| Max. hot air temperature | ºC | 75 | 75 | 75 |
| Working ambient temperature | ºC | -10 ~45 | -10 ~45 | -10 ~45 |
| Noise | dB（A） | 75 | 75 | 75 |
| Dimension(L*W*H) | mm | 1650X856X128 | 1650X1056X1280 | 2250X1360X159 |
1. For heat pump dryer part --- with plywood
2. For drying chamber and trolleys&trays
If shipped with 20ft container or 40ft container, no packing
If shipped with LCL(less than container load), packed in plywood
Our ServiceA. Payment service
1, T/T
2, L/C (for container order only)
3, Western Union, (for sample order & parts)
B. Technical service
1, We calculate the capacity and recommend the LD models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
C. After-sales service
1, Technical support for your installation, operation and maintenance.
2, One year’s warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.