Air Circulation vegetable drying machine/ cassava chips dehydrator with enerLD saving

Air Circulation vegetable drying machine/ cassava chips dehydrator with enerLD saving is widely used in powder, sludge, granular,crystalline materials, chemical material, dehydration treatment, such as chemical raw materials, chemical ore, fin chemicals, organic chemicals,inorganic chemicals, chemical fertilizers polymers, coatings and inorganic pigments, dyes and organic pigments, food and feed additives, catalysts and chemical additives, adhesives, new energy materials, rubber products, chemical reagents, etc.

Shandong Leader Mechanical Equipment Co., LTD is a company specialized in producing twin-screw food extruder, single screw extruder, microwave roasting and sterilization equipments, etc. While based upon domestic market, the company opens and exploits market abroad positively. Until now, our products have been exported many counties and regions, including Russia, Europe, Africa, Korea, Indonesia, UZ (Uzbekistan) and the market share increases gradually year by year. Dongxuya will continue to be aggressive, creative and make a contribution to our country’s food industry development with peers home and abroad.

Conventional thermal sterilization is carried out through heat conduction, convection or radiation to heat the food surface to the inside. To achieve the sterilization temperature, it often takes a long time. Microwave sterilization is a direct interaction of microwave enerLD and food and its bacteria. The interaction between heat effect and non thermal effect is faster than temperature and sterilization. The treatment time is greatly shortened, and the sterilization effect of various materials is usually 3-5 minutes.

Microwave drying, ripening and sterilizing equipment is applied to drying, ripening and sterilization of black Cereals, soybeans, mung beans, corn, wheat skin, buckwheat, oatmeal, soybeans and peanuts.
Drying sterilization seafood seasoning, sterilization, drying, puffing Tenebrio; rose, tea and other tea flower.

Air Circulation vegetable drying machine/ cassava chips dehydrator with enerLD saving

LD company was founded in 2008, LD company professional manufacture: heat pump dryer, water to water heat pump, air to water heat pump, swimming pool heat pump. LD has many years of manufacturing experience and talent reserves.

Working Principle

Heat pump dryer is use of reverse Carnot principle .With free air to absorb heat and transfer it to the drying chamber, drying room temperature to achieve improved, with the appropriate humidity and dehumidification equipment to achieve dry materials. heat pump dryer Compressor - heat exchangers - Chokes - heat sink (outside the machine) - Compressor and other devices constitute a refrigerant cycle system. Under the action of the compressor in the refrigerant circulating in the system flow, it is done in the gaseous booster compressor heating process (temperature up to 100 ℃), releasing it into the machine dry in room temperature air heated by the heat, while they have been and converted to liquid cooling flow, when it runs out machines, liquid absorbs heat quickly evaporates once again transformed into a gaseous state, while the temperature dropped to minus 20 ℃-30 ℃, then the air around the heat sink will continuously transferring heat to the refrigerant. Refrigerant continuous cycle to achieve the heat in the air transport to the drying room heating room air temperature to achieve the purpose of dry material.

1.EnerLD saving&Environmental protection

Adopt close dehumidify+circulating drying type,saving operating cost;

Without waste gas and waste heat pollution,low noise

2.Running Stable,operating easily

PLC+Touch Screen,running stable,operating easily;

Adopt PLC control,can setting different drying curve,suitable for drying different materials.

3.Second waste heat recovery technoloLD(patent)

Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, saving enerLD more than 40%.

4.Exact control temperature and humidity

According to different material setting different drying curve, the heat pump dryer can control the drying chamber temperature between 20-80℃.

5.Recovery volatilized component

Some kinds of material contain volatilized component,

In drying processing,hot and wet air will become condenser water then drain,

collect the condenser water so that collect volatilized component

Warm prompt: We can make any drying chamber sizes as your required.

LD Murshroom Drying LD Lemon Drying LD Sausage Drying

LD Onion Drying LD Wood Drying LD Noodles Drying

LD Fish Drying LD Peper Drying

1.For heat pump dryer parts with export standred plywood case

2.For whole set dryer machine with 20/40FT container

A. Payment service

1, T/T
2, L/C (for container order only)
3, Western Union, (for sample order & parts)

B. Technical service

1, We calculate the capacity and recommend the LD models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.

C. After-sales service

1, Technical support for your installation, operation and maintenance.
2, Two year’s warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.

Wing is online

Any questions about the dryer machine, please feel free to contact.