EnerLD saving onion dryer for sale / industrial onion dehydrator processing machine is widely used in powder, sludge, granular,crystalline materials, chemical material, dehydration treatment, such as chemical raw materials, chemical ore, fin chemicals, organic chemicals,inorganic chemicals, chemical fertilizers polymers, coatings and inorganic pigments, dyes and organic pigments, food and feed additives, catalysts and chemical additives, adhesives, new energy materials, rubber products, chemical reagents, etc.

Shandong Leader Mechanical Equipment Co., LTD is a company specialized in producing twin-screw food extruder, single screw extruder, microwave roasting and sterilization equipments, etc. While based upon domestic market, the company opens and exploits market abroad positively. Until now, our products have been exported many counties and regions, including Russia, Europe, Africa, Korea, Indonesia, UZ (Uzbekistan) and the market share increases gradually year by year. Dongxuya will continue to be aggressive, creative and make a contribution to our country’s food industry development with peers home and abroad.

Conventional thermal sterilization is carried out through heat conduction, convection or radiation to heat the food surface to the inside. To achieve the sterilization temperature, it often takes a long time. Microwave sterilization is a direct interaction of microwave enerLD and food and its bacteria. The interaction between heat effect and non thermal effect is faster than temperature and sterilization. The treatment time is greatly shortened, and the sterilization effect of various materials is usually 3-5 minutes.

Microwave drying, ripening and sterilizing equipment is applied to drying, ripening and sterilization of black Cereals, soybeans, mung beans, corn, wheat skin, buckwheat, oatmeal, soybeans and peanuts.
Drying sterilization seafood seasoning, sterilization, drying, puffing Tenebrio; rose, tea and other tea flower.

EnerLD saving onion dryer for sale / industrial onion dehydrator processing machine

What is LD Heat Pump Dryer And Working Principle?

Heat pump dryer is use of reverse Carnot principle .With free air to absorb heat and transfer it to the drying chamber, drying room temperature to achieve improved, with the appropriate humidity and dehumidification equipment to achieve dry materials. heat pump dryer Compressor - heat exchangers - Chokes - heat sink (outside the machine) - Compressor and other devices constitute a refrigerant cycle system. Under the action of the compressor in the refrigerant circulating in the system flow, it is done in the gaseous booster compressor heating process (temperature up to 100 ℃), releasing it into the machine dry in room temperature air heated by the heat, while they have been and converted to liquid cooling flow, when it runs out machines, liquid absorbs heat quickly evaporates once again transformed into a gaseous state, while the temperature dropped to minus 20 ℃ --30 ℃, then the air around the heat sink will continuously transferring heat to the refrigerant. Refrigerant continuous cycle to achieve the heat in the air transport to the drying room heating room air temperature to achieve the purpose of dry material.

Comparation:

• Old type traditional drying room
1.Drying process is difficult to meet the requirements of food hygiene;;
2.Much coal dust, and finished goods bleak in clolor;
3.Need to replace coal midway, large labour intensity;
4.During drying, it generates large plenty of gas such as CO2/SO2/soot, with poor working conditions

5.Soot gas for the oven equipment corrosion is serious, short service life.
6.The temperature is difficult to achieve automatic control; Temperature and humidity in

drying process fluctuation is bigger, affect the drying quality.

• High temperature heat pump drying dehumidifying drying room:

1, Drying process completely meet the requirements of food hygiene;
2, Cleaning and hygiene in the good condition, the finished colour and lustre is brigLD;
3, Automatic control, reduce the labor and the labor intensity;
4, During drying, there is no water/gas/solids generating, the green environmental protection; Good and comfortable working environment .

5, Long service life, low operating cost, good economy;
6, Temperature and humidity is automatic control; Small fluctuations in the temperature and humidity in drying process, the drying quality is stable and reliable.

Features Of Our Dryer:

1.New designed enerLD saving dryer with two times waste heat recovery.

2.Using our patented technoloLD: circulating heating & dehumidification, broaden the application of a dehumidifier in industrial drying

3.Adopt PLC + touch screen controllers, operation easily and more accurate

4.Adopt programmable control mode, can be set different drying curve, satisfy different kinds material drying methods

5.Multi-functions: drying / cooling / dehumidify

6.Low temperature drying method(15-50°C/60°C/75°C),similar nature drying.

7.During drying, the material does not craze, does not distortions, non-discoloring, never degenerate, non-oxidize, drying completely, with good rehydration, keep nutrient content;

8.Stable operation without being influenced by weather

9.Economical: Heat pump dryer running cost just as 40% of oil dryer, 50% of coal burning boiler, 30% of electric boiler.

LD heat pump dryer Technical Parameters

Recommend Drying Machine+Drying Chamber

Warm prompt: We can make any drying chamber sizes as your required.

Application :

A. Payment service
1, T/T
2, L/C (for container order only)
3, Western Union, (for sample order & parts)

B. Technical service
1, We calculate the capacity and recommend the LD models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.

C. After-sales service
1, Technical support for your installation, operation and maintenance.
2, One year’s warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty

For heat pump dryer parts---with plywood

For drying chamber +trolleys

If shipped with 20ft container or 40ft container, no packing

If shipped with LCL( less than container load), packed in plywood.

Video link about dryer working principle: LDtp://www.heat-pump-dryer.com/Downloads.asp?id=13

If you are interested in our product , Please feel free to contact. Thank you!

Contact Me!