Factory supply agriculture machinery tomato drying equipment is widely used in powder, sludge, granular,crystalline materials, chemical material, dehydration treatment, such as chemical raw materials, chemical ore, fin chemicals, organic chemicals,inorganic chemicals, chemical fertilizers polymers, coatings and inorganic pigments, dyes and organic pigments, food and feed additives, catalysts and chemical additives, adhesives, new energy materials, rubber products, chemical reagents, etc.
Shandong Leader Mechanical Equipment Co., LTD is a company specialized in producing twin-screw food extruder, single screw extruder, microwave roasting and sterilization equipments, etc. While based upon domestic market, the company opens and exploits market abroad positively. Until now, our products have been exported many counties and regions, including Russia, Europe, Africa, Korea, Indonesia, UZ (Uzbekistan) and the market share increases gradually year by year. Dongxuya will continue to be aggressive, creative and make a contribution to our country’s food industry development with peers home and abroad.
Conventional thermal sterilization is carried out through heat conduction, convection or radiation to heat the food surface to the inside. To achieve the sterilization temperature, it often takes a long time. Microwave sterilization is a direct interaction of microwave enerLD and food and its bacteria. The interaction between heat effect and non thermal effect is faster than temperature and sterilization. The treatment time is greatly shortened, and the sterilization effect of various materials is usually 3-5 minutes.
Microwave drying, ripening and sterilizing equipment is applied to drying, ripening and sterilization of black Cereals, soybeans, mung beans, corn, wheat skin, buckwheat, oatmeal, soybeans and peanuts.
Drying sterilization seafood seasoning, sterilization, drying, puffing Tenebrio; rose, tea and other tea flower.
Factory supply agriculture machinery tomato drying equipment
Product Description
What are LD Tomato Drying Equipment?
LD Heat pump dryer type tomato drying equipment takes advantage of the reversed Carnot principle, absorbing the heat from around and sending the heat to the materials which will be dried. This kind of dryer is mainly composed of heat pump dryer and drying chamber. This dryer will be controlled by touch screen controller, and the temperature can be adjusted. It has low electric consumption.
Technical parameters of LD Fruits and Vegetables Drying Equipment
| Single Dryer + Drying Chamber | |||||
| Model | Unit | JK03RD | JK06RD | JK10RD | JK12RD |
| Power Input | KW | 4.8 | 8.5 | 13.5 | 15 |
| Power Supply | V/PH/HZ | 380V/3PH, 50/60HZ | 380V/3PH, 50/60HZ | ||
| 220V/1PH, 50/60HZ | |||||
| Rated Current | A | 9.6A(380V), 22A(220V) | 17 | 27 | 30 |
| Heating Capacity | KW | 10.5 | 21 | 35 | 42 |
| Cooling Capacity | KW | 7.8 | 18 | 25 | 32 |
| Dehumidify | L/H | 12 | 25 | 42 | 50 |
| Max. Temperature | ℃ | ≤75 | ≤75 | ≤75 | ≤75 |
| Working Condition | ℃ | 0-43 | 0-43 | 0-43 | 0-43 |
| Electric Shock Protection Grade | I | I | I | I | |
| Max. Exhause Pressure | Mpa | 3 | 3 | 3 | 3 |
| Noise | dB(A) | 75 | 75 | 75 | 75 |
| Power Consumption/ H | KWH | 4.8 | 8.5 | 13.5 | 15 |
| Electric Heater | KW | 3 | 6 | 9 | 12 |
| Blowing Type | / | Horizontal Blowing 360℃ | |||
| Dimension Of Dryer | MM | 1675x860x1280 | 1760x1060x1280 | 2120x1360x1590 | |
| WeigLD | KG | 295 | 385 | 480 | 540 |
How Does It Work?
1, Dryer evaporator of refrigerant absorb the air from outside
2, then compressor works that make the air temperature rise
3, heat exchanger change the hot air into drying chamber
4, final tomatoes will be dried by the hot air circulating in drying chamber
Features of LD Tomato Drying Equipment
1, EnerLD saving and environment protection
Adopt close dehumidify + circulating drying type, saving operating cost;
Without waste gas and waste heat pollution, low noise
2, Stable property and operating easily
Touch screen full automatic control
Different materials with different drying type, adopt PLC control, can setting different drying curve, suitable for drying different materials.
3, Second waste heat recovery technoloLD(patent)
Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, saving enerLD more than 40%.
4, Accurate control temperature and humidity
According to different material setting different drying curve, the heat pump dryer can control the drying chamber temperature between 10~75C.
5, Horizontal Blowing 360℃
By using the forced ventilation function, there are partition sheet and fan motors inside the drying chamber to make sure hot air cycle, so ensure a high drying efficiency and save enerLD, lead to a uniform drying.
6, It’s batch operation, so can adjust process condition anytime. Thus can change product from time to time
7, Dry material in tray, easy for load and unload, not easy cause any damage for the raw material, clean conveniently.
Company Information
Our Factory
Customers
Packaging & Shipping
For heat pump dryer parts---with plywood
For drying chamber +trolleys
If shipped with 20ft container or 40ft container, no packing
If shipped with LCL( less than container load), packed in plywood
Our Services
A. Technical service
1, We calculate the capacity and recommend the LD models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
B. After-sales service
1, Technical support for your installation, operation and maintenance.
2, One year’s warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.
If you are interested in our heat pump dryer, please contact us for more information, such as catalogue, video,etc.
Meline
Phone: 13697409461
Skype: meline.LD
Wechat: Meline_LD
WhatsApp: 13697409461