Air source heat pump dryer equipment fruit and vegetable drying machine/ carrot mushroom dehydrator with enerLD saving is widely used in powder, sludge, granular,crystalline materials, chemical material, dehydration treatment, such as chemical raw materials, chemical ore, fin chemicals, organic chemicals,inorganic chemicals, chemical fertilizers polymers, coatings and inorganic pigments, dyes and organic pigments, food and feed additives, catalysts and chemical additives, adhesives, new energy materials, rubber products, chemical reagents, etc.
Shandong Leader Mechanical Equipment Co., LTD is a company specialized in producing twin-screw food extruder, single screw extruder, microwave roasting and sterilization equipments, etc. While based upon domestic market, the company opens and exploits market abroad positively. Until now, our products have been exported many counties and regions, including Russia, Europe, Africa, Korea, Indonesia, UZ (Uzbekistan) and the market share increases gradually year by year. Dongxuya will continue to be aggressive, creative and make a contribution to our country’s food industry development with peers home and abroad.
Conventional thermal sterilization is carried out through heat conduction, convection or radiation to heat the food surface to the inside. To achieve the sterilization temperature, it often takes a long time. Microwave sterilization is a direct interaction of microwave enerLD and food and its bacteria. The interaction between heat effect and non thermal effect is faster than temperature and sterilization. The treatment time is greatly shortened, and the sterilization effect of various materials is usually 3-5 minutes.
Microwave drying, ripening and sterilizing equipment is applied to drying, ripening and sterilization of black Cereals, soybeans, mung beans, corn, wheat skin, buckwheat, oatmeal, soybeans and peanuts.
Drying sterilization seafood seasoning, sterilization, drying, puffing Tenebrio; rose, tea and other tea flower.
LD company was founded in 2008, LD company professional manufacture: heat pump dryer, water to water heat pump, air to water heat pump, awimming pool heat pump. LD has many years of manufacturing experience and talent reserves. LD got more patented technologies and honor, the product has passed the international quality management system ISO9001:2000 certification, production license, CCC, CE certification and many other certification authority of the State quality and technical Supervision departments identified and quality inspection, and was included in the national"focus on promoting national scientific and technological achievements" and" natinal key new product plan". LD products sold around the world, has won very good feedback.
Product Description
LD heat pump dryer operates according to a basic air conditioning cycle involving four main components: the evaporator, the compressor, the condenser and the expansion valve. The working fluid(refrigerant) at low pressure is vaporized in the evaporator by heat drawn from the dryer exhaust air. The compressor raises the enthalpy of the working fluid of the heat pump and discharges it as superheated vapor at high-pressure. Heat is removed from the working fluid is then throttled to the low-pressure line(using an expansion valve)and enters the evaporator to complete the cycle. In the dryer system, hot and dry air at the exist of the condenser is allowed to pass througLD the drying chamber where it gains latent heat from the material. The humid air at the dryer exsit then passes through the evaporator where condensation of moisture occurs as the air goes below dew point temperature. Then drain the condenser water.
Working Principle:A device that transfers heat from a colder area (ambient temperature) to a hotter area (drying chamber) by using mechanical enerLD, as in refrigerator. 360 Air Circulation, material drying more evenly.
Recomand model| Recommend Dryer+Drying Chamber Size | |||
| Item | Description | Product Capacity | Drying Chamber size |
| 1 | One unit JK03RD dryer + drying chamber | 300Kg / batch | 4000*2000*2200mm |
| 2 | One unit JK06RD dryer + drying chamber | 600Kg / batch | 6000*2800*2200mm |
| 3 | One unit JK10RD dryer + drying chamber | 1000Kg / batch | 6000*3000*2200mm |
| 4 | Two units JK03RD dryers + drying chamber | 1200Kg / batch | 7000*2200*2200mm |
| 5 | Two units JK06RD dryers + drying chamber | 1500Kg / batch | 10000*2800*2200mm |
| 6 | Two units JK10RD dryers + drying chamber | 2500Kg / batch | 10000*3000*2200mm |
Warm prompt: We can make any drying chamber sizes as your required
Our dryer features
Why Choose LD?
* EnerLD saving&Environmental protection
Adopt close dehumidify+hot air circulating drying type, saving operating cost; Without waste gas and waste heat pollution; Low noise
*Running Stable, operating easily
Touch screen, runnig stable, operating easily, can set different drying curve, suitable for drying different materials.
*Second waste heat recovery technoloLD(patent)
Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, saving enerLD more than 70%.
*Exact control temperature and humidity
According to different material setting different drying curve, the heat pump dryer can control the drying chamber temperature between 10-75C.
*Recovery volatilized component
Some kinds of material contain volatilized component, in drying processing, hot and wet air will become condenser water then drain, collect the condenser water so that collect volatilized component.
Successful cases
Packaging & Shipping1.For heat pump dryer parts with export standred plywood case
2.For whole set dryer machine with 20GP,40GP,40HQ container
A. Payment service
1, T/T
2, L/C (for container order only)
3, Western Union, (for sample order & parts)
B. Technical service
1, We calculate the capacity and recommend the LD models.
2, We supply you the professional refrigeration technical support and electronic technical support for your
installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
C. After-sales service
1, Technical support for your installation, operation and maintenance.
2, Two year’s warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty
Customers Visit LD
Any questions, please feel free to contact. I am here waiting for you.