Advanced Product dehumidifier food dehydrator fish drying machine is widely used in powder, sludge, granular,crystalline materials, chemical material, dehydration treatment, such as chemical raw materials, chemical ore, fin chemicals, organic chemicals,inorganic chemicals, chemical fertilizers polymers, coatings and inorganic pigments, dyes and organic pigments, food and feed additives, catalysts and chemical additives, adhesives, new energy materials, rubber products, chemical reagents, etc.
Shandong Leader Mechanical Equipment Co., LTD is a company specialized in producing twin-screw food extruder, single screw extruder, microwave roasting and sterilization equipments, etc. While based upon domestic market, the company opens and exploits market abroad positively. Until now, our products have been exported many counties and regions, including Russia, Europe, Africa, Korea, Indonesia, UZ (Uzbekistan) and the market share increases gradually year by year. Dongxuya will continue to be aggressive, creative and make a contribution to our country’s food industry development with peers home and abroad.
Conventional thermal sterilization is carried out through heat conduction, convection or radiation to heat the food surface to the inside. To achieve the sterilization temperature, it often takes a long time. Microwave sterilization is a direct interaction of microwave enerLD and food and its bacteria. The interaction between heat effect and non thermal effect is faster than temperature and sterilization. The treatment time is greatly shortened, and the sterilization effect of various materials is usually 3-5 minutes.
Microwave drying, ripening and sterilizing equipment is applied to drying, ripening and sterilization of black Cereals, soybeans, mung beans, corn, wheat skin, buckwheat, oatmeal, soybeans and peanuts.
Drying sterilization seafood seasoning, sterilization, drying, puffing Tenebrio; rose, tea and other tea flower.
Advanced Product dehumidifier food dehydrator fish drying machine
Product DescriptionWorking Principle
A device that transfers heat from a colder area (ambient temperature) to a hotter area (drying chamber) by using mechanical enerLD, as in refrigerator.
Whole set of LD Dryer 
Recomand model
| Item | Description | Product Capacity | Drying Chamber size |
| 1 | One unit JK03RD dryer + drying chamber | 300Kg / batch | 4000x2000x2200mm |
| 2 | One unit JK06RD dryer + drying chamber | 600Kg / batch | 6000*2800*2200mm |
| 3 | One unit JK12RD dryer + drying chamber | 1000Kg / batch | 6000*3000*2200mm |
| 4 | Two units JK03RD dryers + drying chamber | 1300Kg / batch | 7000*2000*2200mm |
| 5 | Two units JK06RD dryers + drying chamber | 1500Kg / batch | 10000*2800*2200mm |
| 6 | Two units JK12RD dryers + drying chamber | 2500Kg / batch | 10000*3000*2200mm |
Remarks: The product capacity is on the basis of the weigLD of fruit and vegetable. You can choose accorrding to your product or contact us for professional suggestion.
Not only use for fish, our machine is suitable for many kinds of product, such as
Dry vegetables lLD Radish, lettuce, pumpkin, carrots, spinach, cassava etc
Dry fruits lLD Apple, lemon, mango slices, dried longan, dried longan etc
Dry meat: fish, Sausage, jery beef, duck, ham ect
Others it can dry noodle, wooden, stick incense, herbs, floers ect.
Workflow Chart
1. Most of the air is circulated in the drying chamber. The heat efficiency is high and enerLD is saved.
2. The heat dryer can control the drying chamber temperature between 10-75C.
3. The heating source use 25% electricity and 75% air source.
4. Running stable, operating easily.
5. Low noise, balanced operation, automatically temperature control, easy installation and maintenance.
6. The application is wide. Can be used for drying various materials and is versatile drying equipment.
7. The baking plate dimensions custom-made as custmer request.
1. For heat pump dryer part --- with plywood
2. For drying chamber and trolleys&trays
If shipped with 20ft container or 40ft container, no packing
If shipped with LCL(less than container load), packed in plywood
Workflow Chart
A. Payment service
1, T/T
2, L/C (for container order only)
3, Western Union, (for sample order & parts)
B. Technical service
1, We calculate the capacity and recommend the LD models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
C. After-sales service
1, Technical support for your installation, operation and maintenance.
2, One year’s warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.
Certifications
Any questions, please feel free to contact.