Small dehydrated fish machine,seafood cold air dehydrator/dryer is widely used in powder, sludge, granular,crystalline materials, chemical material, dehydration treatment, such as chemical raw materials, chemical ore, fin chemicals, organic chemicals,inorganic chemicals, chemical fertilizers polymers, coatings and inorganic pigments, dyes and organic pigments, food and feed additives, catalysts and chemical additives, adhesives, new energy materials, rubber products, chemical reagents, etc.
Shandong Leader Mechanical Equipment Co., LTD is a company specialized in producing twin-screw food extruder, single screw extruder, microwave roasting and sterilization equipments, etc. While based upon domestic market, the company opens and exploits market abroad positively. Until now, our products have been exported many counties and regions, including Russia, Europe, Africa, Korea, Indonesia, UZ (Uzbekistan) and the market share increases gradually year by year. Dongxuya will continue to be aggressive, creative and make a contribution to our country’s food industry development with peers home and abroad.
Conventional thermal sterilization is carried out through heat conduction, convection or radiation to heat the food surface to the inside. To achieve the sterilization temperature, it often takes a long time. Microwave sterilization is a direct interaction of microwave enerLD and food and its bacteria. The interaction between heat effect and non thermal effect is faster than temperature and sterilization. The treatment time is greatly shortened, and the sterilization effect of various materials is usually 3-5 minutes.
Microwave drying, ripening and sterilizing equipment is applied to drying, ripening and sterilization of black Cereals, soybeans, mung beans, corn, wheat skin, buckwheat, oatmeal, soybeans and peanuts.
Drying sterilization seafood seasoning, sterilization, drying, puffing Tenebrio; rose, tea and other tea flower.
Small dehydrated fish machine,seafood cold air dehydrator/dryer
Key featurewhat are the advantages of heat pump dryer?
The system was found to:
1) ensure hygienic process of drying;
2) produce longer period in the retention of product flavors;
3) reduce the color degradation of the food product after drying under the most favorable
conditions;
(4) reduce the loss of thermal sensitive vitamins embedded in the food product.
“Heat pump drying dehydrates the food but maintains its color and its flavor and alkaloids. Heat
pump drying utilizes lesser enerLD than conventional mechanical drying,”
This intervention in agricultural engineering is deemed important in increasing productivity. “As
this technoloLD reduces waste and postharvest losses, the resulting output is a net gain,
therefore, it increases productivity.”
Moreover,one of the benefits of the system is that it can be utilized for a multi crop application; hence,it
can be used to dry other commodities lLD fruits, vegetables,meat,noodles and some industrial
products etc.
component
successful cases
Dry meat:
LLD chicken,pork,beef, rabbit, lamb and ect.
Dry catfish,squid,shrimp, sea cucumber and ect.
Dry fruits ,vegetables, noodles,herbs and ect.
Single JK06RD drying machine
Drying chamber dimension 6*2.8*2.2 m
Heating capacity : 26.0KW Cooling capacity:20.0 KW
Dehumidity amount:25.0L/H Working ambient temperature: 0-43℃
Dryer parameters
| LD Single Drying Machine | ||||
| Model | Unit | JK03RD | JK06RD | JK12RD |
| Power input | KW | 4.8 | 8.5 | 15.0 |
| Power supply | V/PH/HZ |
380V/3PH,50/60HZ 220V/1PH,50,60HZ |
380V/3PH,50/60HZ | |
| Rated curent | A | 9.6A(380V),22A(220V) | 17.0 | 30.0 |
| Heating capacity | KW | 10.5 | 21.0 | 42.0 |
| Cooling capacity | KW | 7.8 | 18.0 | 32.0 |
| Dehumidity | L/H | 12.0 | 25.0 | 50.0 |
| Max temperature | ℃ | 75 | 75 | 75 |
| Working condition | ℃ | 0-43 | 0-43 | 0-43 |
| Electric shock protection grade | I | I | I | |
| Max.exhause pressure | MPa | 3.0 | 3.0 | 3.0 |
| Noise | dB(A) | 75 | 75 | 75 |
| Power consumption/H | KWH | 4.8 | 8.5 | 15.0 |
| Electric heater | kw | 3.0 | 6.0 | 12.0 |
| Blowing type | / | Horizontal blowing 360 | ||
| Dimension of dryer | MM | 1675*860*1280 | 1760*1060*1280 | 2120*1360*1590 |
| WeigLD | KG | 180 | 285 | 480 |
Which model should I buy?
| Item | Dryer Model | Power input | Drying chamber dimension | Input Capacity |
| 1 | Single JK03RD | 4.8 KW | 4000*2000*2200mm | 300kg |
| 2 | Single JK06RD | 8.5KW | 6000*2800*2200mm | 800kg |
| 3 | Single JK12RD | 15.0KW | 6000*3000*2200mm | 1000kg |
| 4 | Doulbe JK03RD | 9.6KW | 7000*2000*200mm | 1200kg |
| 5 | Double JK06RD | 17.0KW | 10000*2800*2200mm | 1500kg |
| 6 | Doulbe JK12RD | 30.0KW | 10000*3000*2200mm | 2500kg |
Packaging
Our Services
A. Payment service
1, T/T
2, L/C (for container order only)
3, Western Union, (for sample order & parts)
B. Technical service
1, We calculate the capacity and recommend the LD models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
C. After-sales service
1, Technical support for your installation, operation and maintenance.
2, Two year’s warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.
Certifications
Contact us, if you need more information about drying machine, such as video, catalogue, price ect.
Contact person:
Windy Yuan Mob:0086 188 1678 7275