Multifuctional CE 10kw 380v geothermal water to water heat pump Water to water heat pump takes use of the natural energy stored in the earth to heat your home. suitable cold area -25 c water to water heat pump is no fuel deliveries, no chimney, no waste deliveries from the ground source heat pump Water to water heat pump.Shandong Leader Machinery Co.,ltd. Ultra-low temperature modular air source heat pump modular design concept, each module suitable cold area -25 c water to water heat pump can be used alone, can also be based on capacity needs, 1-16 basic modules arbitrarily combined into a complete whole Water to water heat pump. Low temperature machine Water to water heat pump using the second generation of high temperature spray paint enthalpy technology, air conditioning temperature environment -25 ℃ heating conditions may be. At the same temperature, compared with the ordinary air-cooled heat pump unit, suitable cold area -25 c water to water heat pump the thermal attenuation rate of 15% or more. Energy saving and environmental protection, safety and environmental protection, all-weather operation, easy to use.Water to water heat pump to water/water to water/ground to water/ground source/geotheral heat pump allows you to combine a water based heating system with a modern heat producing device. suitable cold area -25 c water to water heat pump saves energy consumption up to 80% compared with electric heaters.The Water to water heat pump quiet design makes the whole compressor and heat pump system on a floating plate, leads to a compete isolation from the heat pump bottom, and Water to water heat pump reduce vibration and noise at the most extent. That is to say, Sundez new brine to water heat pump is ideal for indoor installation.The big controller screen with blue LED backlight and simple operation gives the best experience to users.
LD suitable cold area -25 c water to water heat pump
Product Descriptionwater to water heat pump
The ground absorbs nearly half of the solar energy our planet receives. As a result, the earth remains at a constant, moderate temperature just below its surface all year round. However, air temperature varies greatly from summer to winter, making air source (traditional) heating and cooling least efficient when you need it the most.
Geothermal heating and cooling systems take advantage of the stable temperature underground using a piping system, commonly referred to as a “loop.” Water circulates in the loop to exchange heat between your home, the ground source heat pump, and the earth, providing heating, cooling, and hot water at remarkably high efficiencies. In fact, LD geothermal heating and cooling systems are 400-600% efficient and can cut your heating, cooling, and hot water costs by up to 80%.
Geothermal Heating
During the winter, LD geothermal heating and cooling systems absorb heat stored in the ground through the water that circulates in its underground loop. This heat is carried to the ground source heat pumps where it’s concentrated and then sent as warm, comfortable air throughout your home.
When you need heating the most, the air outside is coldest. As a result, a traditional air source heat pump works hard to extract the amount of heat from the cold air needed to properly heat your home. In contrast, a geothermal system consumes less energy as it easily absorbs heat from the abundant supply stored below ground, making geothermal heating significantly more energy efficient. Gas furnaces burn natural gas to provide heat for your home and are only 98% efficient, while geothermal systems use significantly less energy collecting heat from the earth, achieving 400-600% efficiencies.
Geothermal Cooling
During the summer, LD geothermal heating and cooling systems absorb heat from your home and transfers it to the underground loop where it is then absorbed by the cooler earth. The geothermal heat pump uses the cool water returning from the earth to create cool, dehumidified air for your home.
When you need cooling the most, the outside air is hottest. A traditional air source heat pump must work hard to force the heat from your home into the already heat saturated air. In contrast, a geothermal heat pump consumes less energy as it easily rejects heat into the cool earth, making geothermal cooling significantly more energy efficient.
LD water to water heat pump works without oil, gas or other hazardous substance which avoild potential risk that goes together. Moreover no gas connection or a fuel tank is needed. No risk of intoxication, smell or pollution from leakage.
Product photograph
water to water heat pump JK02WR/JK03WR/
parameters
parameters of water to water heat pump
Model | JK02WR | JK03WR | JK05WR | JK10WR | JK20WR | JK25WR | JK30WR | |
Rated Heating Capacity | KW | 9 | 13.5 | 21 | 42 | 80 | 98 | 116 |
BTU | 30700 | 46100 | 71650 | 136500 | 273000 | 334400 | 395800 | |
Rated Cooling Capacity | KW | 7 | 11 | 17 | 34 | 68 | 82 | 90 |
BTU | 24000 | 37500 | 58000 | 109200 | 232000 | 279800 | 307100 | |
Power Input | KW | 2.1 | 2.8 | 4.35 | 8.8 | 17.5 | 21.5 | 26 |
Power Supply | V | 220 | 220/380 | 220/380 | 220/380 | 380 | ||
Running Current | A | 9 | 13.0/6.0 | 26.0/11.0 | 50.0/22.0 | 35 | 44 | 50 |
Frequency | HZ | 50/60 | ||||||
Compressor Quantity | / | 1 | 1 | 1 | 1 | 4 | 4 | 4 |
Compressor Type | / | Scroll | ||||||
Evaporator | / | Plate type heat exchanger or High-efficient tube in shell Heat Exchanger | ||||||
Pump Quantity | / | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
Water Flow Volume | m³/h | 2~3 | 3~4 | 4~5 | 9~10 | 14~16 | 16~18 | 19~20 |
Water Connections | mm | DN25 | DN25 | DN25 | DN32 | DN50 | DN50 | DN50 |
Water Pressure Drop | KPa | 32 | 34 | 34 | 36 | 36 | 38 | 38 |
Condenser | Plate type heat exchanger or High-efficient tube in shell Heat Exchanger | |||||||
Noise | dB(A) | 40 | 42 | 42 | 44 | 44 | 46 | 46 |
Packing Dimension | L(mm) | 800 | 900 | 900 | 1320 | 1550 | 1550 | 1550 |
W(mm) | 550 | 700 | 700 | 803 | 930 | 930 | 930 | |
H(mm) | 900 | 1000 | 1000 | 980 | 1020 | 1020 | 1020 | |
Net Weight | Kg | 78 | 105 | 145 | 260 | 400 | 410 | 420 |
Gross Weight | Kg | 85 | 115 | 155 | 268 | 420 | 430 | 450 |
Testing Conditions | Cooling | Heating | ||||||
A/C side | Cooling side | A/C side | Heating side | |||||
Inlet/outlet water temp | Inlet/outlet water temp | Inlet/outlet water temp | inlet/outlet water temp | |||||
Ground-water | 12/7℃ | 18/29℃ | 40/45℃ | 15/-℃ | ||||
Ground -loop | 12/7℃ | 25/30℃ | 40/45℃ | 0/-℃ |
Packaging & Shipping
packaging detail of water to water heat pump
we use the strong plywood to pack our goods to make sure that our goods could withstand jolt during the ocean transportation .
FAQ
A. Payment service
1, T/T
2, L/C (for container order only)
3, Western Union, (for sample order & parts)
B. Technical service
1, We calculate the capacity and recommend the best models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
C. After-sales service
1, Technical support for your installation, operation and maintenance.
2, One year’s warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.
Certifications
Shandong Leader Machinery Co.,ltd. located in Jinan City, with three branch companies, and with 400,000 sq meters modern factory in Guangzhou City, with 100,000 units of air source heat pump sold out all over the world. with more than 5,000 square meters show room of 300 different models, with EVI monoblock bb, EVI Split heat pump, DC Inverter monoblock, DC inverter Split for Europe market & north America market, also with household hot water heat pump and swim pool heat pump, fan coil unit, water tank, etc.The Germany customers is very satisfied with the Shandong Leader Machinery Co.,ltd. factory scale, heat pump Water to water heat pump quality, and the technology innovation of suitable cold area -25 c water to water heat pump high efficiency & minus 35C stable working solutions.Shandong Leader Machinery Co.,ltd. of EVI Split & DC Inverter Split Heat Pump is well sold in Europe and North America Market, including US, Canada, Germany, Sweden, Poland, Ukraine, Russia, Finland, Czech, Slovak, Slovenia, etc.
If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
Email:[email protected]
Whatsapp:+86 13064099546
Skype:leaderfoodmachine21
Contact:Mandy
NOTE:We can specially design the machine according to your production's features.