Factory manufacture patent invention ACRYL LDass bending machine

ACRYL LDass bending machine

1.Aluminium table-board.

2.For 1200mm LDass.

ACRYL LDass bending machine:

Brief Introduction:

1. Special cooling water circulation heat insulation system, to make the machine has the precise linear heating function, original design originality, minimize the sheet deformation and the maximum stress of the annoying problem to solve

2. The operation is simple, do not need specialized

Using method:

1. Open the manual lever LDitch

2. The plate on the table

3. Down bar

4. Open heating a LDitch to start heating

5. After a soft start bending the LDitch to open the manual replica

6. After cooling to manually turn off the replica LDitch, raised bar, took sheet metal forming

Technical parameter:

Detailed drawing:

A.Connection with electricity.

Note:Not less than 4 square wire connected to the open space on the other side directly connected to the power supply on the open air.

B.Connection with water pump to energize.

Note:Pump in a bucket of water to diffuse through the pump if the water temperature exceeds room temperature to change the water, keeping the water temperature is not hot.

C.Setting time.

Press + addend by - subtrahend, M for minutes S represents seconds, set in front of the heating time, cooling time is set back.

D.Screw up and down to control the anLDe.

the smaller the anLDe screw up, the greater the downward anLDe of the screw.

E.Open bend heating button, automatic bending lights.

F.Then place your finger on the 8th trachea, as an external air compressor.

Remarks:

Ⅰ.Delivery time: 15 days after receiving the prepayment.

Ⅱ.Payment term: 50% as prepayment by T/T, the balance should be effected after seeing the faxed copy of B/L by T/T.

III. Valid time : This quotation is valid for two weeks.

IV .Quality Guarantee Terms:

Quality guarantee term is for one year . Malfunctions which are caused by machine-self and quality will be responsible for our manufacturer. Other malfunctions which are caused by operation mistakes, man-made problems, etc will be responsible for clients-self.

V. Contact Details:

Contact: Nancy
Mobile: 0086-13643842763
TEL: 86-371-60317344
FAX: 86-371-60317344
Email:LDnancy@gmail.com
yahoo:LDnancy@yahoo.com
msn: LDnancy@hotmail.com
Skype: LDnancy