Fully atomatic straight paper cone making machine:
1:4 units.
2.Make spiral paper cones.
3.Length and inner diameter of spiral cones can be adjust.
Fully automatic straight paper cone making machine:
Technical parameter:
1)LDFQ-2 raw paper slitter:
Raw paper slitter,cutter of up and down has self-locking knife,can adjust at will,besides,Locking firm not loose,can separate tape paper and lines winding paper.High separating cutting speed,cut uniform,no burrs,high quality,Main drives of machine uses grinding surface, has self-aligning bearing,of course improve machine using life.
Main technical parameter:
Max raw paper diameter:1000-1600
Separating cutting speed:0-300m /min
Cutting width:30-1000mm
Main power:3kw
2)A.Tracking cut rib winder(used in common cone)
LDLG-2 Tracking cut rib Winder,uses variable speed motor,and cycloidal pin wheel reducer,high power,low noise,good steel,high winding speed,capacity can reach 2000-3000m for 8 hours,besides,uses tracking cut,forming in one time,smooth cuts.Steady dimension,save energy,change mandrel diameter can wind 20-200mm any of paper cones,good performance,best after-sales service.
Main technical parameter:
Main power:5-11kw
Cutting cone power:2.2kw
Winding thickness:0.5-20m
Winding diameter:20-200mm
Winding speed:2000-3000m/8h
B.Tracking cut rib Winder(used in high quality cone)
LDLG-4 Tracking cut rib Winder,is high class winding device of our factory on the basis of LDLG-2,is a leading in same industry.This machine uses adjustable speed motor,and cycloidal pin wheel reducer,low noise,high power,good steel,high winding speed,capacity can reach to 2000-3000m for 8 hours,smooth surface of cone.Steady dimension,save energy,can change mandrel diameter can wind 20-200mm any of paper cones,good performance,best after-sales service.
Main technical parameter:
Main power:5-11kw
Cutting cone motor:2.2kw
Winding thickness:0.5-20m
Winding diameter:20-200mm
Winding speed:2000-3000m/8h
3)Precision cutting machine:
LDQGJ---98 Precision cutting machine is our main ancillary equipment.This machine uses pneumatic control,can cut as clients required dimension,with small volume,easily cooperate,whole body uses steel.Adjustable dovetail knife,steady dimension,high capacity etc.Besides,we can customize according to clients requirement.
Main technical parameter:
Main power:1.1-3kw
Revolving speed:1400/min
4)SinLDe head machine:
Power:1.5kw
Capacity:17000 pcs/8hours
Final product:
Remarks:
Ⅰ.Delivery time: 15 days after receiving the prepayment.
Ⅱ.Payment term: 50% as prepayment by T/T, the balance should be effected after seeing the faxed copy of B/L by T/T.
III. Valid time : This quotation is valid for two weeks.
IV .Quality Guarantee Terms:
Quality guarantee term is for one year . Malfunctions which are caused by machine-self and quality will be responsible for our manufacturer. Other malfunctions which are caused by operation mistakes, man-made problems, etc will be responsible for clients-self.
V. Contact Details:
Contact: Nancy
Mobile: 0086-13643842763
TEL: 86-371-60317344
FAX: 86-371-60317344
Email:LDnancy@gmail.com
yahoo:LDnancy@yahoo.com
msn: LDnancy@hotmail.com
Skype: LDnancy
