New condition machine make cotton seed oil from fabricator
WHAT OILSEEDS ARE AVAILABLE?
COTTONSEED
BRIEF INTRODUCTION OF OILSEEDS SCREW PRESS MACHINE:
Small oil press means small capacity oil expelling machine that is able to process less than 15 tons per day and is mainly used in the small scale oil pressing unit.The small oil press expellers LD'e fabricated can be used for various vegetable plant such as jatropha seeds, canola seeds, peanuts, rapeseeds and cotton seeds, seJessicae seeds, sunflower seeds, grass seeds etc.
1. It is composed by automatic control part, heating pressing part, adjustment part, transmission part and vacuum oil filter;
2. The automatic control system is composed by air-break LDitch, alternating current contactor, temperature control meter, circuit automatic protection device etc.
3. The heating and pressing part is composed by the heater, cage bar, body assembly etc.
4. The transmission part is composed by of the spindle and reducer casting, belt pulley and motor wheel etc.
5. Adjustment part is composed by of the adjusting bolt, adjusting nut and locking nut etc.
6. Vacuum oil filter is composed by vacuum pump, oil filter can and some other assemblies.
LD'E MANUFACTURING SITE:
MAIN SPARE PARTS OF SCREW PRESS MACHINE:
worm, squeezing head, worm shaft, cage bar, heater ring, cake outlet, vacuum filter .
WAY TO OPERATE OIL EXPELLER:
1. Prepare the seeds;
2. Adjust the machine, such as electricity, heating (optional);
3. Start the machine, putting seeds into the feeder;
4. Seed into the screw bolt , begin to press
5. The crude oil comes out of the squeezing bolt, then flow into the board ,
6. Go into the vacuum filter, using it for filtration
7. After filtration, the oil comes out from the bottom of pipe
PARAMETERS FOR 6YL SERIES EXPELLER:
Item |
6YL-80 |
6YL-100 |
6YL-120 |
6YL-130 |
|||
Speed of press screw |
30-45r/m |
30-40r/m |
30-40r/m |
28-40r/m |
|||
Gear ratio of gear case |
14/42x19/57=1:6.63 |
15/40x15/55=1:9.78 |
15/34x15/55=1:9.59 |
15/38x19/48=1:7.38 |
|||
Boundary dimension |
1650*1150*1750 |
1950*1300*1900 |
2050*1350*2000 |
2200*1600*2150 |
|||
Handling capacity |
80-150kg/h |
150-250kg/h |
200-300kg/h |
250-400kg/h |
|||
Weight |
760kg |
950kg |
1100kg |
1300kg |
|||
Power |
Main engine |
Y160L-6-5.5KW |
Y160M-6-7.5KW |
Y160L-6-11KW |
Y180L-6-15KW |
||
Vacuum pump |
Y90S-4-0.55KW |
Y90S-4-1.1KW |
Y100L1-4-1.5KW |
Y100L1-4-2.2KW |
|||
Heater |
2KW |
3KW |
3.3KW |
3.8KW |
|||
MAIN FEATURES:
1. High oil yield, low oil residual in cake: The oil left in cake is less than 6%. The cake thickness can be adjusted when the machine stops running;
2. Small-land using: only 10-20 square meters workshop can make production;
3. Pure oil quality: machine surface is made of chrome plated stainless steel, in line with food hygiene standards; Also,with two vacuum oil filters, the residual can be removed by simply filtering;
4. Other advantages: high efficiency, energy and labor saving, easy operation, simple maintenience.
WHAT OTHER PRESSING MACHINE DO WE FABRICATE?
WHAT CERTIFICATES DO LD'E HAVE?
Still have questions?
What should you do??
Do not worry!
Jessica is always here!!
Just Contact Jessica!!!